Skip to content

MHO900 test build 15: the front-end bus with the stock timing (development build)

Pre-release
Pre-release

Choose a tag to compare

@dekajoule dekajoule released this 22 Nov 18:18
· 87 commits to main since this release

Development build for testing on an MHO900. Not a release. One fix, and it may be the one that matters. Not
yet verified on hardware.

With the stock program's whole front-end set-up replayed (mho-dev-13), every front-end register still read
0x0000ff: the front ends took no word at all. The stock driver's raw timing shows why: it lets the bus clock rest
low and spends about 7 us per half period; OOS let it rest high and switched without pauses. oos-fpgad now drives
the front ends with the bus OOS uses on the same pins of the DHO800/DHO900, which has the stock timing.

No install needed: copy oos-fpgad to /oos/bin/oos-fpgad on a scope with mho-dev-13 or mho-dev-14 and run it
(the steps are in issue #4). The image is here for anyone who installs anyway; mho-check.py and mho-poll are the
same as in mho-dev-14.

File What
oos-fpgad this build's oos-fpgad, for /oos/bin/oos-fpgad
oos-mho900-dev-15.img the OOS image, for the install on a second card (boot/card-install.py, then boot/switch.py oos)
oos-mho900-dev-15.oosupd the same image as a signed package, for the install over ADB (oos-update gel-install)
oos-update the install tool of this build, for the scope (aarch64)
mho-check.py, mho-poll version 11 and its watcher, as in mho-dev-14
MHO900_OOS_Install.GEL the stick install. Not known whether the stock MHO900 update accepts it. Use the ADB or card route
SHA256SUMS checksums

Built from tag mho-dev-15 (build 20261122-181724) with kernel/build-base.sh (the kernel of mho-dev-10) and OOS_BOARD=mho boot/build-dev-image.sh, Linux 6.12.115. Sources: this tag, and the third-party sources of v0.1.14.