Skip to content

MHO900 test build 16: it measures (development build)

Pre-release
Pre-release

Choose a tag to compare

@dekajoule dekajoule released this 22 Nov 18:34
· 89 commits to main since this release

Development build for testing on an MHO900. Not a release. The MHO900 measures under OOS: on hp197's MHO98
(mho-dev-15, issue #4) the probe compensation signal came back, 0.000 to 0.312 V with a mean of 0.156 V, as the stock
system measured it. All four front ends answered as under the stock system, and the input relays clicked.

That came from the run's diagnostics, in its last variant. This build makes that order the default, so the first
acquisition is the one that measures: the stock cold start (your capture), the snapshot's link, configuration and
front end, then the ADC registers brought to the snapshot's values (adc-sync), then the acquisition. With
oos-mho-live the screen then shows the board's frames.

Only the snapshot's setting is measured: one channel, its scale, 200 us/div; the keys still act on the demo.

File What
oos-fpgad-mho-dev-16 this build's oos-fpgad alone, for /oos/bin/oos-fpgad on a scope with mho-dev-14 or later
oos-mho900-dev-16.img the OOS image, for the install on a second card (boot/card-install.py, then boot/switch.py oos)
oos-mho900-dev-16.oosupd the same image as a signed package, for the install over ADB (oos-update gel-install)
oos-update-mho-dev-16 the install tool of this build, for the scope (aarch64)
mho-check.py, mho-poll version 11 and its watcher, as in mho-dev-14
MHO900_OOS_Install.GEL the stick install. Not known whether the stock MHO900 update accepts it. Use the ADB or card route
SHA256SUMS checksums

Built from tag mho-dev-16 (build 20261122-183316) with kernel/build-base.sh (the kernel of mho-dev-10) and OOS_BOARD=mho boot/build-dev-image.sh, Linux 6.12.115. Sources: this tag, and the third-party sources of v0.1.14.