Repository navigation
MHO900 platform test build 3 (development build, no acquisition)
Pre-release
Pre-release
Development build for testing on an MHO900. Not a release. It's mho-dev-2
with two fixes from the first run of mho-dev-2 on an MHO98 (#4). Still no acquisition and the demo signal on screen.
- Bring-up, clock step: the units' clock table starts with a labelled line (
R0 (INIT), a tab, the word), which
stoppedoos-fpgad bringupbefore it touched the clock chip. It's read now, and each line's register number must
match its word, so a wrong table still stops the step. - WLAN: the driver of the stick loaded only after 60 s, because the WLAN script waited for an acquisition
start-up the MHO900 doesn't have yet. It loads right after the boot now.
Not yet verified on hardware: both fixes, and every bring-up step after power. The platform ran on two units
(mho-dev-1), mho-dev-2 on one, and the bring-up's power step ran on an MHO98.
| File | What |
|---|---|
oos-mho900-dev-3.img |
the OOS image, for the install on a second card (boot/card-install.py) |
oos-mho900-dev-3.oosupd |
the same image as a signed package, for the install over ADB (oos-update gel-install) |
oos-update |
the install tool of this build, for the scope (aarch64) |
MHO900_OOS_Install.GEL |
the stick install. Not known whether the stock MHO900 update accepts it. Use the ADB or card route |
SHA256SUMS |
checksums |
Built from tag mho-dev-3 with kernel/build-base.sh and OOS_BOARD=mho boot/build-dev-image.sh, Linux 6.12.115,
the same kernel configuration as mho-dev-2. Sources: this tag, and the third-party sources of
v0.1.14 (rootfs/deps.lock and the kernel base are the same),
which also holds linux-6.12.115-base.tar.xz.