Repository navigation
MHO900 test build 8 (tools: mho-check.py --snapshot; image as mho-dev-7)
Pre-release
Pre-release
Development tools for testing on an MHO900. Not a release. The OOS image is unchanged: install
mho-dev-7 if you want OOS on the scope. This tag brings the
tool for the next step, the first acquisition.
mho-check.pyversion 8,--snapshot: takes one setting of the stock system whole, so that OOS can start the
acquisition board the way the stock system had it: the front-end words of one channel (its whole set and every
scale), the FPGA's configuration registers and the registers of both ADCs, while the stock system acquires the
probe compensation signal. Everything is set back at the end. It runs under the stock system, over ADB as
before. How to run it is in the issues (#4, #248, #491).--panelnow reads every label you type (before, every second one was lost).boot/card-install.pysays when OOS is written but not selected yet (boot/switch.py oos, or--arm).tools/sdcard-clone.shreads file sizes on Linux too.
| File | What |
|---|---|
mho-check.py |
the check tool, version 8 (also in the source of this tag) |
SHA256SUMS |
checksum |