Skip to content

OOS 0.1.10

Choose a tag to compare

@dekajoule dekajoule released this 12 Nov 21:07
· 650 commits to main since this release

A fix release for OOS, an open operating system for the Rigol DHO800/DHO900: the web remote's live picture with GPU drawing. Thanks for the report in the forum thread.

Experimental. It has run on a DHO924S, and DHO804s run earlier versions. Read the disclaimer, the status and the known limits first. Measurements are not calibrated to any standard.

Installing and updating

No build needed: Installation.

  • From 0.1.7, 0.1.8 or 0.1.9: install oos-0.1.10.oosupd through http://<scope>:8080/update. The scope restarts into the new build by itself (kexec) and installs it from there. Then switch it off at the mains, wait 30 seconds and switch it on: that start is the trial.
  • From 0.1.6 or older: install 0.1.7 first, the same way, then this one. The image brings another device tree than 0.1.6 (the GPU and the video encoder switched on), which only 0.1.7 and later can try by kexec before they install it. Details in the 0.1.9 release.
  • USB stick (DHO800_DHO900_OOS_Install.GEL, Storage > Upgrade in the stock system): installs any version directly, and also updates an older OOS build on the card.

What changed

Fixed in 0.1.10

  • Web remote with Display > Graphics = GPU (the default): the live picture went back and forth between the current screen and an older one, most visibly when a menu opened or closed (the WLAN box also seemed to drop its address). The frame loop handed the shown screen to the web page by swapping buffers, which only works when the next screen is drawn whole on the CPU. With the GPU each picture that comes back now goes to the web page as a copy. On a DHO924S, 120 web pictures in a row while menus open and close: 86 older screens with 0.1.9, none with 0.1.10, about 9.5 pictures a second over WLAN.

Known: with a monitor on HDMI the panel can flicker while a menu is open (reported with GPU drawing, not reproduced yet). Display > Graphics = CPU is the safe choice with a monitor until then.

Everything new in 0.1.7 to 0.1.9: 0.1.9 release. Full list: CHANGELOG.md.

Files

File What
oos-0.1.10.img boot image, for the second-card install in the README
oos-0.1.10.oosupd update package for a running OOS (0.1.7 or later), signed with the maintainer key (id 4dbd03d9763869dd), which every build trusts
DHO800_DHO900_OOS_Install.GEL install from a USB stick through the stock system's Storage > Upgrade, without opening the scope; keep its name
SHA256SUMS checksums
linux-6.12.115-base.tar.xz kernel source, needed to build the kernel: put it into kernel/src/
busybox_1.37.0*, e2fsprogs-1.47.2.tar.xz, wpa_supplicant-2.11.tar.gz, kexec-tools-2.0.32.tar.xz sources of the other programs in the image
mesa_26.0.8.orig.tar.xz, glibc_2.43*, gcc-16_16-20260322*, libdrm_2.4.131*, zlib_1.3* sources of the GPU helper's libraries (Mesa, glibc, libstdc++ and libgcc, libdrm, zlib)

State

On a DHO924S: this exact package installed from 0.1.9 through the web page, started by kexec and installed. The fix was measured on the unit before (120 web pictures, see above).

Bug reports, test results from other models and code are welcome.