Skip to content

OOS 0.1.12

Choose a tag to compare

@dekajoule dekajoule released this 13 Nov 13:49
· 622 commits to main since this release

A release of OOS, an open operating system for the Rigol DHO800/DHO900: the GPU picture with a monitor as fast as it should be, and from the forum thread views to switch between, the scope by name on the network (mDNS), the NTP server from DHCP, and the colours of CH2 and CH4.

Experimental. It has run on a DHO924S, and DHO804s run earlier versions. Read the disclaimer, the status and the known limits first. Measurements are not calibrated to any standard.

Installing and updating

No build needed: Installation.

  • From 0.1.7 or newer: install oos-0.1.12.oosupd through http://<scope>:8080/update (or System > Update). The scope restarts into the new build by itself (kexec) and installs it from there. Then switch it off at the mains, wait 30 seconds and switch it on: that start is the trial.
  • From 0.1.6 or older: install 0.1.7 first, the same way, then this one (details in the 0.1.9 release).
  • USB stick (DHO800_DHO900_OOS_Install.GEL, Storage > Upgrade in the stock system): installs any version directly, and also updates an older OOS build on the card.

What changed

New in 0.1.12

  • Display > Views: up to four arrangements of the screen to switch between, instead of one busy screen. Each view keeps its windows, second pane, measurements, DVM and counter, cursors, zoom, histogram, analyser page, XY and full screen; channels, time base, trigger and acquisition are shared. Switch with the numbers in the top bar, a swipe from the left or right edge of the plot inwards, the Quick key (Next view) or :DISPlay:VIEW <n>. Saved with a setup.
  • The scope by name: http://dho924s-204527.local:8080 (model and serial number) reaches the web remote, also with only a link-local address on a cable straight to a computer. OOS answers mDNS and announces the web remote, SCPI and VXI-11 for browsing (DNS-SD). System > Network > Remote services: mDNS on/off and the Name, which is also the host name the scope sends to DHCP.
  • NTP server = DHCP: the scope asks the NTP server its DHCP lease names (option 42), pool.ntp.org when there is none. The new default; a server chosen before stays. Time from NTP stays off by default.

Changed

  • Graphics (CPU or GPU) moved from Display to System.
  • CH2 is teal and CH4 sky blue (the other way round until 0.1.11), as the colour rings of the inputs and probes.

Fixed

  • Graphics = GPU with a monitor was slower than the CPU (16 to 19 frames a second with four channels and HDMI Layout, the CPU 22 to 23). The GPU mixed the counts of the stretched traces itself, 16 reads of integer textures per pixel: 36 to 41 ms for the traces of a 1920x1080 monitor alone. The helper now works out the traces' brightness indices once at the size of the maps and the monitor reads them through the GPU's own filter: 8 to 9 ms. Panel and monitor also keep their own textures. On a DHO924S, four channels, 1920x1080: 30 frames a second with the GPU in Mirror, Waveform and Layout, the frame loop at 22 to 30 % of its core against 48 to 68 % with the CPU. The panel's pixels are the same as before.
  • Tests that would have caught it: the device test now measures the frame rate, the frame loop's load and the GPU's time per screen with the CPU and the GPU and, with a monitor, in each HDMI mode; against 0.1.11's GPU helper it fails. New for it: :SYSTem:GRAPhics CPU|GPU, and :SYSTem:STATe? names the graphics, the monitor and the GPU time.

Full list: CHANGELOG.md.

Files

File What
oos-0.1.12.img boot image, for the second-card install in the README
oos-0.1.12.oosupd update package for a running OOS (0.1.7 or later), signed with the maintainer key (id 4dbd03d9763869dd), which every build trusts
DHO800_DHO900_OOS_Install.GEL install from a USB stick through the stock system's Storage > Upgrade, without opening the scope; keep its name
SHA256SUMS checksums
linux-6.12.115-base.tar.xz kernel source, needed to build the kernel: put it into kernel/src/
busybox_1.37.0*, e2fsprogs-1.47.2.tar.xz, wpa_supplicant-2.11.tar.gz, kexec-tools-2.0.32.tar.xz sources of the other programs in the image
mesa_26.0.8.orig.tar.xz, glibc_2.43*, gcc-16_16-20260322*, libdrm_2.4.131*, zlib_1.3* sources of the GPU helper's libraries (Mesa, glibc, libstdc++ and libgcc, libdrm, zlib)

State

On a DHO924S: this exact package installed from a running OOS through the web page, started by kexec and installed; the device test of the quick tier passed on it (20 of 20), with the new frame rate test against a 1920x1080 monitor in all three modes. mDNS was checked from a Mac (dns-sd, the web remote by name), the NTP server from DHCP with a DHCP server that hands out option 42. Larger monitors than 1920x1080 are not tried.

Bug reports, test results from other models and code are welcome.