Skip to content

Releases

v1.0.3

Choose a tag to compare

@diego-luz diego-luz released this 10 Nov 00:59

Added

  • Watcher (pve-organize-vigia.path, systemd): when a Proxmox update replaces the web UI page,
    the add-on is put back within seconds. Before, the apt hook only did it when the whole apt run
    ended, so the groups disappeared for the length of the update (minutes, with a new kernel).
    The apt hook stays as a second check. pve-organize status shows the watcher.
  • README: what to expect after a Proxmox update (no need to reinstall; Ctrl+F5).

Changed

  • pve-organize reaplicar only rewrites the page when the add-on line is missing or outdated, and
    logs to the journal (journalctl -t pve-organize), including the error when a new Proxmox page
    cannot be patched. Before, the apt hook discarded every message.
  • pve-organize uninstall also removes the watcher.

Tested

  • Watcher, on a local copy of the Proxmox 8.4 page: replacing the page the way dpkg does puts the
    line back in about 0.1 s, the add-on's own write does not loop, and a page without the
    pvemanagerlib.js line logs an error.

Install

On the Proxmox node, as root (web UI >_ Shell or SSH):

bash -c "$(curl -fsSL https://github.com/diego-luz/pve-organize/releases/download/v1.0.3/install.sh)"

Then reload the Proxmox page (F5). The installer checks every file against SHA256SUMS
and installs nothing if a checksum does not match. Already installed? The same command updates it.

Prefer to look before installing? Download the 4 files below into a folder on the node, then:

sha256sum -c SHA256SUMS && bash install.sh

Checksums (SHA-256)

9640ff6064c996c88b47b31e5e5b66b2ea17672ac729767400c63d9eed20b55c  install.sh
79241387e8405102fc3b05aae32fd04e5176ec427c1baaf5b8bc45aaab4e8886  pve-organize
8ab778135c9e27005bbcba510eeaaa99b0b9a509d4f1fde2e8e746853f244578  pve-organize.js

Full changelog: CHANGELOG.md

v1.0.2

Choose a tag to compare

@diego-luz diego-luz released this 09 Nov 20:09

Fixed

  • Clusters with Tag Style → case-sensitive off (the Proxmox default): Proxmox saves tags in
    lowercase, so guests showed under "No group" and group colors were lost. Tags are now matched
    without regard to case, and group colors are saved in the case Proxmox uses.
  • Two groups whose tags differ only in case (Test and TEST) are refused, since Proxmox may merge
    them.
  • Renaming a group's tag: guests that cannot be changed (locked by a backup, snapshot or migration,
    or on a node that is down) are listed in a single message at the end, instead of one error each.

Tested

  • Proxmox VE 8.4 in a 3-node cluster (case-sensitive on): groups and subgroups, Move to group,
    renaming groups, a locked guest. Case-sensitive off: the Proxmox 8.4 web UI with a simulated API.

Install

On the Proxmox node, as root (web UI >_ Shell or SSH):

bash -c "$(curl -fsSL https://github.com/diego-luz/pve-organize/releases/download/v1.0.2/install.sh)"

Then reload the Proxmox page (F5). The installer checks every file against SHA256SUMS
and installs nothing if a checksum does not match. Already installed? The same command updates it.

Prefer to look before installing? Download the 4 files below into a folder on the node, then:

sha256sum -c SHA256SUMS && bash install.sh

Checksums (SHA-256)

d648980cbc950042f04cb2be0323d5edd410749ebddc2b91f8c3cf24bd24fe5d  install.sh
7332df3f403501d30a3c781b9fca3c6d38281e5a1137c2e86769d6b89499d215  pve-organize
5525d8dfe2be0e0749727ac7689e8d073446fbda79cd8586af94dc4f94f2ae77  pve-organize.js

Full changelog: CHANGELOG.md

v1.0.1

Choose a tag to compare

@diego-luz diego-luz released this 09 Nov 19:41

Fixed

  • Renaming a group in Tree groups… now renames its tag too (and the guests that use it), as long
    as the tag was still the one derived from the old name. Before, a group renamed from "Template" to
    "Clients" kept showing the Template tag on its guests. A tag edited by hand is left alone.

Install

On the Proxmox node, as root (web UI >_ Shell or SSH):

bash -c "$(curl -fsSL https://github.com/diego-luz/pve-organize/releases/download/v1.0.1/install.sh)"

Then reload the Proxmox page (F5). The installer checks every file against SHA256SUMS
and installs nothing if a checksum does not match. Already installed? The same command updates it.

Prefer to look before installing? Download the 4 files below into a folder on the node, then:

sha256sum -c SHA256SUMS && bash install.sh

Checksums (SHA-256)

b840d88c6ed32e086aa1e3fe6036f30f4b239272cc9ced5d51508d241eb76aed  install.sh
0a9adc103c9fb3a819d1721f22edca1661ec7ec74035abf2d55068ffd1034432  pve-organize
ae476e51c867b3d6508a7dfbaedee9f420b143b9315854c43a47414f9e85fbb8  pve-organize.js

Full changelog: CHANGELOG.md

pve-organize 1.0.0

Choose a tag to compare

@diego-luz diego-luz released this 06 Nov 14:38

First numbered release. Tested on Proxmox VE 9.2 and 8.4.

Added

  • Group headers and subcategories in the Server View tree, from guest tags.
  • Right-click Move to group menu, and a Tree groups… window (names, colors, order,
    styles A–F, counter, indent, ON/OFF) with live preview.
  • English, Portuguese and Spanish, following the Proxmox login language.
  • pve-organize on | off | status | version | uninstall, and an apt hook that re-applies the add-on
    after Proxmox updates.
  • Installer downloads a numbered release and verifies SHA256SUMS before installing.

Fixed (since the first unnumbered builds)

  • Removing a group keeps the tag on the guests; the tag's original color comes back.
  • Adding a group for a tag that already has a color keeps that color.
  • Group names are HTML-escaped everywhere (no script injection through names).
  • Renaming several groups at once updates each guest with a single change.
  • Saving re-reads the Datacenter options, so notes edited meanwhile are not overwritten.
  • Saving no longer changes the global Tag Style options (case-sensitive, ordering, shape).
  • The one-line installer never picks up files from the current directory.
  • pve-organize on fails loudly if it cannot hook into the Proxmox page.

Install

On the Proxmox node, as root (web UI >_ Shell or SSH):

bash -c "$(curl -fsSL https://github.com/diego-luz/pve-organize/releases/download/v1.0.0/install.sh)"

Then reload the Proxmox page (F5). The installer checks every file against SHA256SUMS
and installs nothing if a checksum does not match. Already installed? The same command updates it.

Prefer to look before installing? Download the 4 files below into a folder on the node, then:

sha256sum -c SHA256SUMS && bash install.sh

Checksums (SHA-256)

d6b3a7f7ebb17e9a853f5629e26bdf7e8c530e071523a5fc2953b27d9925f54b  install.sh
f67b7cb80b33884b78e4387b25a4864723340aca3c6dbbb5f1588f1c658e76b8  pve-organize
16af10132b986ce9873266824dacddf72f4c981f5c070174f26dc323f6d3dbd9  pve-organize.js

Full changelog: CHANGELOG.md