Skip to content

Supported Devices

dilshan edited this page Nov 22, 2026 · 1 revision

Supported Devices

USB ids

USB id Transport Opcodes Verified
2009:7638 MSC (mass-storage style) standard yes - on real hardware
2109:7638 MSC standard simulated only
0453:9005 BULK standard simulated only
0618:9018 BULK alternate (0x32 GetImage, 0x33 Link) simulated only

"Simulated only" means the protocol was taken from the vendor SDK and checked against the simulated sensor, but not against a physical unit.

Reports from users with those models are welcome.

Recognising your sensor

lsusb

A sensor with the MSC transport typically appears as:

Bus 001 Device 003: ID 2009:7638 iStorage USBKey Module

and in /sys/bus/usb/devices/<id>/: manufacturer USBKey Chip, product USBKey Module, interface class 08 with bulk endpoints 0x01 and 0x81. Despite the "USBKey" name and the storage interface class, it exposes no disk.

Shared ids - a caution

The ids 2009:7638 and 2109:7638 may also be used by ordinary USB storage products. Opening one with this library detaches its kernel driver and sends it sensor commands. If you have such a drive attached, set the environment variable OLRU_DENY_MSC=1 so olru_probe() does not list those ids, or make sure to select the right device by bus/address.

Image sizes

The library handles the 256 × 288 image used by the supported models. Product lists for the LRU series include models with other image sizes (256 × 360, 320 × 480, 400 × 500, ...). Those need different transfer sizes and are not supported yet.

Adding a model

  1. Find its ids with lsusb.
  2. Add an entry to known_models[] in src/olru_usb.c (transport, alt-opcode flag, name).
  3. Add the ids to udev/99-openlru.rules.
  4. Try gtk_probe, then gtk_capture.

If the model uses another transport or image size, see Architecture.

Clone this wiki locally