Skip to content

Releases

Ozzy for Dynacord CMS 600-3 0.5.0-rc.1

Pre-release

Choose a tag to compare

@github-actions github-actions released this 16 Nov 03:54
v0.5.0-rc.1
b20c524

Userspace macOS driver for the Dynacord CMS 600-3: 4 inputs and 4 outputs at 44.1, 48 and 96 kHz, plus both MIDI ports (USB-MIDI and SystemCtrl). Needs an Apple Silicon Mac on macOS 26.1 or later, and no SIP changes.

What's new in 0.5.0

This release is rebuilt on upstream Ozzy's own userspace daemon, which upstream now ships as install option 3. The fork keeps its CMS 600-3 extras on top: the SystemCtrl MIDI port, named channels, volume and mute, the MON and AUX devices, and devices that ride out a driver restart.

What changes

  • The daemon now runs once, as root, from boot (/usr/local/bin/OzzyDaemon, started by /Library/LaunchDaemons/com.ozzy.daemon.plist), instead of once per logged-in user. The mixer no longer moves between users' daemons on a user switch.
  • Its log is in the system log (subsystem OzzyDaemon), not ~/Library/Logs/OzzyDaemon.log. macos/debuglogs.command collects it with the plug-ins' logs.
  • 12 ms of output is queued, not 24 ms, so playback latency is lower. It ran without a dropout on the mixer at 44.1, 48 and 96 kHz.
  • The driver starts the mixer at 96 kHz and then switches to the rate set in Audio MIDI Setup.
  • If the mixer stops streaming, the driver restarts it, as before. A restart that fails now leaves it stopped until you replug it, where 0.4.x kept retrying.
  • The Core Audio and MIDI plug-ins use the daemon's device list and devices only if root created them, so another local user can't stand in for the daemon.
  • Upstream fixes come with it, among them better handling of short input transfers and of the mixer's feedback at start.

Upgrading

  • From 0.4.x: the installer stops and removes 0.4.x's per-user daemon before it starts the new one. Settings carry over.
  • From 0.3.x: the output volume and mute set with 0.3.x carry over. The mixer's device ID includes its USB port, as it has no serial number, so after an upgrade from 0.3.x it appears as a new device once and apps may need it picked again; in another USB port it is another device with its own settings.
  • If /usr/local/bin on your Mac can be written by users other than root (an old Homebrew install can leave it so), the installer stops and says how to fix it: the daemon runs from there as root.

Install with Homebrew

brew install --cask dominics/tap/ozzy-cms600

Or install the package

Download the .pkg below. It is not signed with an Apple Developer ID, so macOS blocks it the first time you open it:

  1. Double-click the package, then close the warning.
  2. Open System Settings > Privacy & Security, scroll to Security, and click Open Anyway next to the message about the package.
  3. Confirm the warnings that follow, and the installer opens.

Or skip Gatekeeper from Terminal: sudo installer -pkg Ozzy-CMS600-*.pkg -target /

Uninstall

brew uninstall --cask ozzy-cms600, or sudo "/Library/Application Support/Ozzy/uninstall.sh".

More in the README.

Ozzy for Dynacord CMS 600-3 0.4.3

Choose a tag to compare

@github-actions github-actions released this 15 Nov 23:39
v0.4.3
8d274f1

Userspace macOS driver for the Dynacord CMS 600-3: 4 inputs and 4 outputs at 44.1, 48 and 96 kHz, plus both MIDI ports (USB-MIDI and SystemCtrl). Needs an Apple Silicon Mac on macOS 26.1 or later, and no SIP changes.

What's new in 0.4.3

Reliability

  • No more periodic digital distortion (a crunch every second or two, in all apps) after the driver recovered the mixer while audio was running. The driver's clock started over, but apps kept going on the old timeline until something restarted their audio, such as a sample rate change. Now the audio restarts on the new clock as soon as the driver recovers, after a USB stall, a wake from sleep or a driver restart.
  • A MON or AUX input device no longer stays silent when macOS accepted a change to it while it was idle and never carried it out. Recording from it again brings its input back.

Installing from source

  • Option 3 of install.command (the userspace driver) now builds and installs the package instead of saying it isn't implemented yet.
  • install.command recognises an existing userspace install, and no longer mistakes it for the kext and asks you to uninstall it.

Upgrading

  • From 0.4.x: nothing to do; settings carry over.
  • From 0.3.x: the output volume and mute set with 0.3.x carry over. The mixer's device ID includes its USB port, as it has no serial number, so after an upgrade from 0.3.x it appears as a new device once and apps may need it picked again; in another USB port it is another device with its own settings. The first time the driver runs it comes up at 48 kHz; after that it keeps the rate you set.

Install with Homebrew

brew install --cask dominics/tap/ozzy-cms600

Or install the package

Download the .pkg below. It is not signed with an Apple Developer ID, so macOS blocks it the first time you open it:

  1. Double-click the package, then close the warning.
  2. Open System Settings > Privacy & Security, scroll to Security, and click Open Anyway next to the message about the package.
  3. Confirm the warnings that follow, and the installer opens.

Or skip Gatekeeper from Terminal: sudo installer -pkg Ozzy-CMS600-*.pkg -target /

Uninstall

brew uninstall --cask ozzy-cms600, or sudo "/Library/Application Support/Ozzy/uninstall.sh".

More in the README.

Ozzy for Dynacord CMS 600-3 0.4.2

Choose a tag to compare

@github-actions github-actions released this 04 Nov 02:33
v0.4.2
ffe850b

Userspace macOS driver for the Dynacord CMS 600-3: 4 inputs and 4 outputs at 44.1, 48 and 96 kHz, plus both MIDI ports (USB-MIDI and SystemCtrl). Needs an Apple Silicon Mac on macOS 26.1 or later, and no SIP changes.

What's new in 0.4.2

New

  • An input volume and mute for the CMS 600-3, next to the output ones: Sound settings and Control Center show an input level slider and mute, and apps can set them like any input device's. They use the output's curve (-60 to 0 dB) and are kept per device.

Reliability

  • If the driver process restarts (a crash, or its LaunchAgent being restarted), apps playing or recording keep the device: it stays listed and silent for up to 3 s, and carries on at the same sample rate and settings once the driver is back. 0.4.1 removed it, and apps had to pick it again. MON and AUX recordings carry on too.
  • A driver that can't stop the mixer's USB transfers when it shuts the mixer down keeps the memory they may still write, instead of freeing it under them.
  • ~/Library/Logs/OzzyDaemon.log is rotated at 5 MB (the previous one is kept as OzzyDaemon.log.1), and a log file that can't be opened is reported in the system log instead of failing silently. debuglogs.command collects both.
  • Lost USB feedback packets (a macOS scheduling hiccup) no longer count towards the limit that switches feedback pacing off for the rest of the session, as in 0.3.0.
  • The audio plug-in checks the sample rate, safety offsets and timestamp spacing the driver publishes before using them.
  • The MIDI plug-in finds a device's existing port again even when the device's name fills its whole name field.

Linux

  • A USB transfer the kernel refuses to resubmit stops the streams with an XRUN (the next prepare restarts the mixer) instead of silently leaving fewer transfers queued.
  • Feedback only counts as alive when its value is in range, so the 50 ms stall check is not fooled by packets of zeros from a halted mixer.
  • Checked on the mixer for the first time since 0.4.0: playback and capture at 44.1, 48 and 96 kHz, both MIDI ports, an underrun giving an XRUN, and a failed restart leaving the mixer's USB alone.

Uninstalling the kext

  • uninstall.command now says when the kext stays loaded until a reboot, and rebuilds or explains the auxiliary kernel collection, so an old kext can't come back at boot and take the mixer from the userspace driver. The driver conflict message names it correctly.

Upgrading

  • From 0.4.x: nothing to do; settings carry over.
  • From 0.3.x: the output volume and mute set with 0.3.x carry over. The mixer's device ID includes its USB port, as it has no serial number, so after an upgrade from 0.3.x it appears as a new device once and apps may need it picked again; in another USB port it is another device with its own settings. The first time the driver runs it comes up at 48 kHz; after that it keeps the rate you set.

Install with Homebrew

brew install --cask dominics/tap/ozzy-cms600

Or install the package

Download the .pkg below. It is not signed with an Apple Developer ID, so macOS blocks it the first time you open it:

  1. Double-click the package, then close the warning.
  2. Open System Settings > Privacy & Security, scroll to Security, and click Open Anyway next to the message about the package.
  3. Confirm the warnings that follow, and the installer opens.

Or skip Gatekeeper from Terminal: sudo installer -pkg Ozzy-CMS600-*.pkg -target /

Uninstall

brew uninstall --cask ozzy-cms600, or sudo "/Library/Application Support/Ozzy/uninstall.sh".

More in the README.

Ozzy for Dynacord CMS 600-3 0.4.1

Choose a tag to compare

@github-actions github-actions released this 03 Nov 09:09
v0.4.1
b03a6ba

Userspace macOS driver for the Dynacord CMS 600-3: 4 inputs and 4 outputs at 44.1, 48 and 96 kHz, plus both MIDI ports (USB-MIDI and SystemCtrl). Needs an Apple Silicon Mac on macOS 26.1 or later, and no SIP changes.

What's new in 0.4.1

0.4.0 moved the driver onto upstream Ozzy's rewrite. 0.4.1 brings back behaviour from 0.3.0 that the move lost, and fixes problems found reviewing it.

Reliability

  • A start that fails when the mixer is plugged in (a USB request timing out, say) is tried again: 5 tries half a second apart, then each 2 s while the mixer stays plugged in. 0.4.0 waited for a replug.
  • A restart that fails after a sample rate change, a setting change or a wake from sleep now releases the mixer and tries again each 2 s, instead of leaving it silent until a replug.
  • A mixer that stops streaming is noticed and restarted sooner: 3 failed transfers in a row on any USB pipe, a transfer the system refused, or an output queue that ran dry (which halts the mixer's firmware). Restarts can come 1 s apart instead of 10 s.
  • The driver starts the mixer at 48 kHz, or at the rate last set on that USB port, instead of at 96 kHz each time. An app running at 48 kHz no longer sees a switch to 96 kHz and back after a replug, a user switch or a recovery.
  • The driver's heartbeat keeps going while it sets up the mixer, so a slow start isn't taken for a driver that has gone away.
  • A sample rate change the driver finishes after Core Audio stopped waiting for it is now picked up.

Audio

  • The output queue is 24 ms again (0.4.0: 12 ms), so a few ms of macOS scheduling delay no longer let it run dry and halt the mixer.
  • If coreaudiod quits during playback, the mixer goes silent instead of repeating the last fraction of a second.
  • A short or failed USB input read gives silence instead of old audio, and the input starts from silence after a restart.
  • An app sending NaN samples is sent silence, not full-scale noise.
  • MON and AUX follow a sample rate change of the main device again (reading silence while it happens), run on clocks of their own so starting or stopping the main device leaves them alone, and are named "CMS 600-3 MON" and "CMS 600-3 AUX" again. All three are related devices again, so an aggregate of them needs no resampling.

Security

  • The audio and MIDI plug-ins again use the driver's shared memory only if the user in front owns it, so another local user can't feed them audio or MIDI.
  • Values read from the shared memory (MIDI ring positions, the ring layout, device names) are checked before use, so a process writing it can't make the driver or the plug-ins read or write out of bounds.

Linux

These change the Linux module's support for the CMS 600-3, which has been compiled but not yet run on the mixer since 0.4.0.

  • A restart that fails no longer resets the mixer's USB, after which the mixer may only come back when power-cycled. The stream stays stopped and the next open or prepare tries again.
  • When the mixer stops sending feedback for 50 ms (its firmware halted), the streams stop with an XRUN instead of playing on into a silent device; the next prepare restarts the mixer.
  • The output queue is 24 ms, as on macOS.

Upgrading

  • From 0.3.x: the output volume and mute set with 0.3.x now carry over (0.4.0 came up at full volume, unmuted), unless the mixer already has any setting of its own from 0.4.0 (volume, mute or stereo pair), which then wins. Since 0.4.0 the mixer's device ID includes its USB port, as it has no serial number: after an upgrade from 0.3.x it appears as a new device once, so apps may need it picked again, and in another USB port it is another device with its own settings.
  • The first time 0.4.1 drives the mixer it comes up at 48 kHz; after that it keeps the rate you set.
  • debuglogs.command now includes the userspace driver's own log, ~/Library/Logs/OzzyDaemon.log, and whether its LaunchAgent is running.

Install with Homebrew

brew install --cask dominics/tap/ozzy-cms600

Or install the package

Download the .pkg below. It is not signed with an Apple Developer ID, so macOS blocks it the first time you open it:

  1. Double-click the package, then close the warning.
  2. Open System Settings > Privacy & Security, scroll to Security, and click Open Anyway next to the message about the package.
  3. Confirm the warnings that follow, and the installer opens.

Or skip Gatekeeper from Terminal: sudo installer -pkg Ozzy-CMS600-*.pkg -target /

Uninstall

brew uninstall --cask ozzy-cms600, or sudo "/Library/Application Support/Ozzy/uninstall.sh".

More in the README.

Ozzy for Dynacord CMS 600-3 0.4.0

Choose a tag to compare

@github-actions github-actions released this 02 Nov 10:30
v0.4.0
2932606

Userspace macOS driver for the Dynacord CMS 600-3: 4 inputs and 4 outputs at 44.1, 48 and 96 kHz, plus both MIDI ports (USB-MIDI and SystemCtrl). Needs an Apple Silicon Mac on macOS 26.1 or later, and no SIP changes.

Install with Homebrew

brew install --cask dominics/tap/ozzy-cms600

Or install the package

Download the .pkg below. It is not signed with an Apple Developer ID, so macOS blocks it the first time you open it:

  1. Double-click the package, then close the warning.
  2. Open System Settings > Privacy & Security, scroll to Security, and click Open Anyway next to the message about the package.
  3. Confirm the warnings that follow, and the installer opens.

Or skip Gatekeeper from Terminal: sudo installer -pkg Ozzy-CMS600-*.pkg -target /

Uninstall

brew uninstall --cask ozzy-cms600, or sudo "/Library/Application Support/Ozzy/uninstall.sh".

More in the README.

Ozzy for Dynacord CMS 600-3 0.3.0

Choose a tag to compare

@github-actions github-actions released this 30 Oct 04:22
v0.3.0
d6b92f2

What's new

  • MON and AUX input devices. Two new input-only devices, "CMS 600-3 MON" and "CMS 600-3 AUX", carry the MON and AUX buses (USB inputs 4 and 3) on their own. Pick one as the microphone in Slack, Zoom or any other call app to send a mic mix from the desk without the music on the master. They share the main device's clock, so they also work in aggregate devices without resampling.

Userspace macOS driver for the Dynacord CMS 600-3: 4 inputs and 4 outputs at 44.1, 48 and 96 kHz, plus USB-MIDI. Needs an Apple Silicon Mac on macOS 26.1 or later, and no SIP changes.

Install with Homebrew

brew install --cask dominics/tap/ozzy-cms600

Or install the package

Download the .pkg below. It is not signed with an Apple Developer ID, so macOS blocks it the first time you open it:

  1. Double-click the package, then close the warning.
  2. Open System Settings > Privacy & Security, scroll to Security, and click Open Anyway next to the message about the package.
  3. Confirm the warnings that follow, and the installer opens.

Or skip Gatekeeper from Terminal: sudo installer -pkg Ozzy-CMS600-*.pkg -target /

Uninstall

brew uninstall --cask ozzy-cms600, or sudo "/Library/Application Support/Ozzy/uninstall.sh".

More in the macOS README.

Ozzy for Dynacord CMS 600-3 0.2.0

Choose a tag to compare

@github-actions github-actions released this 13 Oct 22:06
v0.2.0
5966e13

What's new

  • Volume and mute. The menu bar volume slider and the volume keys now work on the CMS 600-3 output, and the level survives restarts.
  • Named channels. Audio MIDI Setup shows inputs as Master L, Master R, AUX and MON, and outputs as Ch 5-6 L/R and Ch 7-8 L/R. The default output stereo pair can be set in Configure Speakers.

Userspace macOS driver for the Dynacord CMS 600-3: 4 inputs and 4 outputs at 44.1, 48 and 96 kHz, plus USB-MIDI. Needs an Apple Silicon Mac on macOS 26.1 or later, and no SIP changes.

Install with Homebrew

brew install --cask dominics/tap/ozzy-cms600

Or install the package

Download the .pkg below. It is not signed with an Apple Developer ID, so macOS blocks it the first time you open it:

  1. Double-click the package, then close the warning.
  2. Open System Settings > Privacy & Security, scroll to Security, and click Open Anyway next to the message about the package.
  3. Confirm the warnings that follow, and the installer opens.

Or skip Gatekeeper from Terminal: sudo installer -pkg Ozzy-CMS600-*.pkg -target /

Uninstall

brew uninstall --cask ozzy-cms600, or sudo "/Library/Application Support/Ozzy/uninstall.sh".

More in the macOS README.

Ozzy for Dynacord CMS 600-3 0.1.0

Choose a tag to compare

@github-actions github-actions released this 12 Oct 10:01
v0.1.0
57f418d

Userspace macOS driver for the Dynacord CMS 600-3: 4 inputs and 4 outputs at 44.1, 48 and 96 kHz, plus USB-MIDI. Needs an Apple Silicon Mac on macOS 26.1 or later, and no SIP changes.

Install with Homebrew

brew install --cask dominics/tap/ozzy-cms600

Or install the package

Download the .pkg below. It is not signed with an Apple Developer ID, so macOS blocks it the first time you open it:

  1. Double-click the package, then close the warning.
  2. Open System Settings > Privacy & Security, scroll to Security, and click Open Anyway next to the message about the package.
  3. Confirm the warnings that follow, and the installer opens.

Or skip Gatekeeper from Terminal: sudo installer -pkg Ozzy-CMS600-*.pkg -target /

Uninstall

brew uninstall --cask ozzy-cms600, or sudo "/Library/Application Support/Ozzy/uninstall.sh".

More in the macOS README.