Repository navigation
bbhost v0.2.28
·
197 commits
to master
since this release
- Draw work prepared ahead, now on Windows too. The draw work the Linux build has prepared ahead of time on other threads since v0.2.26 now runs under Windows as well, on PCs where it pays: a graphics card with 6 GB or more of its video memory free, 16 or more processor threads, and a frame rate above 60. The Windows build also prepares only the parts of each draw's data its shaders read, as the Linux build always has. Measured against v0.2.26, before v0.2.27's optimised Windows build, an RTX 3070 Ti laptop at 1080p uncapped ran Old Yharnam at 108 fps against 79, and the Nightmare of Mensis, Cainhurst's courtyard and Central Yharnam about 5% faster; numbers against v0.2.27 are to follow. Everywhere else - integrated graphics, fewer threads, 60 fps and below - Windows draws as in v0.2.27, now with the leaner draw data too. The frame rate at the start decides it, so a frame rate changed while playing applies to it at the next start (#218).
- 8 GB graphics cards get it too. A card with little video memory but 6 GB or more of it free at the start, like that laptop's 8 GB card, now takes the new path with a small fixed amount of video memory, and without pinning more of the PC's memory: the laptop's shared GPU memory stayed at 2.1 GB. This applies to Linux PCs with such a card as well (#218).
- DLSS on Linux. On an NVIDIA RTX card with NVIDIA's own driver (a recent one), Upscaling now offers DLSS on Linux too, at every quality. The Linux download carries NVIDIA's DLSS runtime and bbhost's bridge to it, each under its own licence (about 31 MB more); the Steam Deck package leaves them out. On Linux the lists now offer only what runs there: Upscaling has Off, TAA and, on an RTX card, DLSS (FSR is Windows only), and Frame generation, also Windows only, is gone from Linux's menus and no longer holds the frame rate's choices to half the refresh rate there (#218).
- Mouse Sensitivity goes much lower. With most mice the camera turned too fast even at the slowest setting. Mouse Sensitivity now covers a much wider range, from very slow to as fast as before, and its new default, 50, suits most mice; if you had changed it, it keeps the speed you had. In System > PC Controls it is now called Mouse Sensitivity, so it is no longer mistaken for the game's own Camera Sensitivity, which is the stick's (#218).
- Two PC enhancements, on by default. Full Phantom HP: a hunter summoned to help or invading keeps their full max HP instead of the game's 70%; it is each visitor's own setting, so mixed settings play together. Auto-Replenish Items: twenty more consumables, among them Molotovs, throwing knives, pebbles and the papers, refill from storage the way Blood Vials do, after a death in your own world and on arriving in the Hunter's Dream. Each needs a restart, with a switch in the setup window, F10 and the game's System > PC Enhancements (#218).
- No crash during the title's attract movie. The game could crash a minute or two into the title's attract movie, most often with F10 open, on Windows and Linux (#218).
- Movies play again on Windows. The title's attract movie - and, by the same path, the opening and the credits - could stop after a few seconds with no sound. They now play through with their sound (#218).
- Frame generation works with Upscaling Off or TAA. At a Resolution below the screen's it generated nothing with Upscaling Off or TAA (the counter showed 60 (60)), and once it did, moving edges looked doubled. It now doubles the frames there as it does with DLSS or FSR (#218).
- Changing Upscaling Quality or Resolution while playing takes less video memory. After each change the old size's render targets stayed in video memory for ten seconds beside the new size's. On a graphics card with 6 GB that could fill it and slow the game to a few frames a second, more so with each quick change. They now go with the change. With DLSS, a quick run of changes can still take extra memory for a few seconds, which NVIDIA's driver holds after each change (#218).
- Changing the resolution while playing no longer crashes after a slow frame. A frame that took more than half a second at the moment of the change could crash the game; the change now waits for that frame (#218).
- Stay borderless (Windows). A new setting, off by default: Borderless stays a window that the graphics driver never switches to exclusive fullscreen. Try it if the picture freezes for a few seconds while the game keeps running, for example while another window has focus. It sits under Window mode in the setup window and in F10 while Borderless is chosen, and in the game's System > PC Settings (Stay Borderless), and applies at once. AMD cards: leave it off unless you need it, as it may lower the frame rate (#218).
- The right size with FSR or DLSS in Borderless and Fullscreen. With a second display of another shape (a portrait one beside a 2560x1440, for one), the game was made that shape, with bars at the sides and a smaller HUD; it now takes the size of the display it opens on. In Fullscreen the display's mode was chosen for the Resolution as if no upscaler were on; it now matches the game's size, also with an upscaler chosen in the setup window. With such a pair of displays the game also draws at the size of the display its window is on, and follows the window to the other display while you play, instead of drawing a picture as wide as one and as tall as the other, which cost a copy of every frame; frame rate limits tied to the refresh rate use that display's (#218).
- Frame rate changes apply while you play, 30 included. A game started at 30 now changes its frame rate in F10 at once, instead of asking for a restart after one change (#218).
- TAA at a lower Resolution keeps the HUD sharp. With TAA at a Resolution below your screen's, the HUD and menus now stay at the screen's full size, and the 3D is brought up to it plainly. If it looks softer than before, raise Sharpness: at 90% it sharpens as much as the old upscaling did (#218).
- Switching upscalers no longer keeps the last one's texture detail. At Native AA, TAA after DLSS or FSR kept their sharper texture setting and shimmered more, and DLSS after TAA was a little softer. Each method now sets its own, and one picked after Off starts fresh (#218).
- No broken colours after switching from FSR to TAA. The upscaler could run once more on memory that had just become another target, and draw over it (#218).
- The FPS counter's frame generation number is right after a change. After frame generation was turned off and on, or V-Sync or the size changed, the number in brackets kept the previous value for up to 2 seconds at 60 fps, sometimes the same as the frame rate, as if nothing were generated. It now starts afresh and shows once measured, and the log says how many frames went without generation, and why (#218).
- Less CPU at a frame cap. Where those threads are on and the frame rate is held by its cap, they now rest until the frame needs them again, instead of taking about a core for nothing (#218).
- The game's System > PC Upscaling page shows all its rows. On Windows, Upscaling Quality showed no value and its list did not open, and the Defaults row was missing. All six rows and Defaults show now, and the help lines fit on screen (#218).
- Pick lists in the game's PC menus cover what is under them. With Upscaling's list open, Upscaling Quality's value (Performance, Quality and so on) was drawn over the list, and Texture Quality's list showed Frame Rate's value the same way. An open list now covers the rows under it (#218).
- Menus follow your remapped buttons. Rebinding Interact or Dodge on the Controls page now moves a menu's OK or Back with it: swap L1 and Circle, and L1 backs out of menus while Circle turns to the previous page (#218).
- No stretched glow at some resolutions. At 2560x1440, 2560x1080, 1366x768 and 1280x800 a glare in the Nightmare of Mensis was drawn stretched: a glow floating beside lights, and on weapons such as the Kirkhammer (#218).
- Velomap patches. Three optional patches, off by default, draw motion blur's velocity map at a fixed 1080p, 1440p or 4K instead of the Performance patch's 640x360, for finer motion blur at some GPU cost. Turn one on in the setup window's Patches tab or the patch menu in the game (F9); it needs a restart (#218).
- Isometric camera plugin: zoom without stutter. With the Isometric camera plugin and its Cutaway on, each zoom step stuttered while the game rebuilt its shaders; zooming now rebuilds nothing. The zoom eases, follows the Camera Zoom keys as you bound them, and Camera Zoom Reset (the middle button by default) brings it back. Cut objects now clears what hangs over your hunter's head (#218).
- The setup window checks your sign-in at every start and says if it has expired or this PC was signed out, with the ways to sign in again. While a server that needs an account refuses it, the game plays offline instead of failing every online request, and says so once (#218).
- "Compile shaders now" (Windows) no longer says "the compile ended early" after a compile that finished (#218).
- Linux: the settings move to ~/.local/share/bbhost, beside the data folder. What bbhost kept in ~/.config/bbhost is moved there at the next start, never over a file already there, and the setup window says what moved (#218).