Skip to content

Releases

Beat-Train v1.6

Choose a tag to compare

@drose030 drose030 released this 07 Nov 23:18

Pad sounds. A song can bring its own drum sounds: one hit per pad colour in a sounds folder in the song folder (kick, red, yellow, blue, orange, green, as .wav, .ogg or .mp3). Trackyard v1.2.0 lets you pick them from the song's drum track. Turn up PAD SOUNDS in the settings and every pad plays its drum's sound, so you hear what you play. The song's own drums keep their volume on SHIFT + K2: all the way down to hear only your playing, or a little under it.

Quicker sound. A pad sound now comes out about 12 ms after you hit the pad (it was about 46 ms), with no dropouts on the device.

The highway no longer looks late. What the screen shows is always a few milliseconds old. The notes are now drawn that far ahead, so they reach the line when you hear them. The timing offset (K1) can stay at 0.

To update, replace autorun/beattrain and autorun/beattrain.sha256 on your card with the ones from beattrain-mpc-sample.zip, or copy the whole autorun folder. Your songs and settings in BeatTrain/ stay as they are.

No songs are included.

Beat-Train v1.5

Choose a tag to compare

@drose030 drose030 released this 05 Nov 09:26

Missed notes flash red on every highway. A note that passes without being struck now flashes its target red on the vertical by pad and horizontal highways too, as on the four-lane one.

Version on the start picture. The start picture shows the installed version in its bottom right corner, so you can tell at a glance which one is on your card.

Under the hood, the highway, the song clock, the knobs and fader, and the audio's time stretch were reorganised and are now tested on their own. Playing, the sound and the speed control stay the same.

To update, replace autorun/beattrain and autorun/beattrain.sha256 on your card with the ones from beattrain-mpc-sample.zip, or copy the whole autorun folder. Your songs and settings in BeatTrain/ stay as they are.

No songs are included.

Beat-Train v1.4

Choose a tag to compare

@drose030 drose030 released this 05 Nov 07:59

Settings during a song. B2 now opens the settings while you play: the song pauses, and DONE takes you back to where you were after a 3-2-1 count-in (PLAY goes on at once). A changed hit window judges the rest of the song.

Mix with SHIFT + K1–K3. Hold SHIFT and turn K1 for the song, K2 for the drums and K3 for all other parts (guitar, bass, vocals, keys…), which move together and keep their balance. While SHIFT is held, the bar at the bottom shows only the parts the song has. The levels are saved with the other settings.

To update, replace autorun/beattrain and autorun/beattrain.sha256 on your card with the ones from beattrain-mpc-sample.zip, or copy the whole autorun folder. Your songs and settings in BeatTrain/ stay as they are.

No songs are included.

Beat-Train v1.3

Choose a tag to compare

@drose030 drose030 released this 05 Nov 07:35

Practise slower. Hold SHIFT and move the FADER to slow the song down to 50–100 % in 5 % steps, at the same pitch. Notes, metronome and hit window slow down with it; the speed shows on the play screen and the results. On its own the fader does nothing, so it cannot be moved by accident.

Three highways. Settings → Highway: vertical (four lanes, as before), vertical by pad (one lane per pad the song uses, in the order the pads sit on the panel) or horizontal (notes run from right to left). A small map of the pads under each lane, or left of each row, shows which pad to hit.

Strike line. Settings → Strike line puts the line you hit on at the edge (as before), a quarter, a third or half way along the highway. Struck notes now stay on the highway in white, so a line further in shows a trail of what you just played.

While playing the bar at the bottom names K1–K3, as on the other screens.

To update, replace autorun/beattrain and autorun/beattrain.sha256 on your card with the ones from beattrain-mpc-sample.zip, or copy the whole autorun folder. Your songs and settings in BeatTrain/ stay as they are.

No songs are included.

Beat-Train v1.2

Choose a tag to compare

@drose030 drose030 released this 04 Nov 20:50

Horizontal highway. Under Settings → Highway the notes can now run from right to left, with one row per pad the song uses (as in Melodics). A small map of the pads at the left of each row shows which one to hit. Vertical stays the default.

Smoother picture. The MPC's screen is an SPI panel that takes longer to receive a whole frame than to refresh itself, so it used to show half-old, half-new frames. Beat-Train now sends only what changed, in the order that suits each view. Both views run at about 45–60 frames per second on the device instead of redrawing the whole screen each time.

To update, replace autorun/beattrain and autorun/beattrain.sha256 on your card with the ones from beattrain-mpc-sample.zip, or copy the whole autorun folder. Your songs and settings in BeatTrain/ stay as they are.

No songs are included.

Beat-Train v1.1

Choose a tag to compare

@drose030 drose030 released this 04 Nov 07:46

Floor toms now land on the green pad (PAD 8). Charts that mark toms with Pro Drums markers (Clone Hero / Rock Band MIDI) play their floor-tom notes there instead of on the orange pad; songs without these markers play as before.

To update, replace autorun/beattrain and autorun/beattrain.sha256 on your card with the ones from beattrain-mpc-sample.zip, or copy the whole autorun folder. Your songs and settings in BeatTrain/ stay as they are.

No songs are included.

Beat-Train v1.0

Choose a tag to compare

@drose030 drose030 released this 03 Nov 19:30

First release for the Akai MPC Sample (firmware 1.3.0.x).

Download beattrain-mpc-sample.zip, unzip it and copy the autorun and BeatTrain folders to an exFAT microSD card. Put your Clone Hero song folders into BeatTrain/Songs/. See the README for starting, playing and troubleshooting.

No songs are included.