Repository navigation
SIDOU 2.0.0: the second core, PUNCH, and MULTI and WHOLE A for a DAW
Try it in your browser first: https://dsablic.github.io/sidou/, the
cheat sheet and the
how-to videos, with a new What's new in 2.0.
On the FM-1
- Chip B on the second core. The FM-1's second core renders chip B, so the first core's audio
time is about halved (SIDOU LOOP with the keys on the owner's FM-1: on average 31.4 % to 16.6 %
of a block, at worst 41.7 % to 29.4 %). A self-test at start-up checks core 1 first; a unit
whose core 1 fails it, misreads, stops answering or faults plays on one core with the same
sound until power-off. STATUS's new fourth page, CORES, shows core 1 running or why it is off,
its jobs, where chip B renders and core 0's audio time; ALGORITHM there moves chip B between the
cores to compare. - PUNCH. FX on any song view opens a page whose first six note keys are held effect pads for
the playing song, several at once: MUTE, FILTER SLAM, PITCH DIVE (a tape stop, an octave down in
half a second), STUTTER (the beat repeats; let go, the song is exactly where it would have
been), ECHO THROW (sent into a delay whose echoes ring on) and CHIP SWAP (the song on the other
SID model). Each is undone when its key is let go, and nothing is written into the song. - MULTI plays four parts from a DAW. Channels N, N+1 and N+2 are a monophonic part each on
chip A's three voices, each with its own LAB sound (program change 0..3 the presets, 4 the
instrument's sound, 16..31 USER 1..16), velocity, bend, mod wheel and aftertouch; N+3 plays the
instrument on chip B. The MIDI page shows and picks each channel's sound. - WHOLE A plays one LAB sound on chip A's three voices: POLY (three notes, the oldest giving
way), CHORD (a chord from one key) or ARP (the held notes stepped at a rate or on the MIDI
clock). Program change or the MIDI page'sCHrow picks the sound. - A layer's level in LAB. LAYERS' K4 is LEVEL, 0 to 100 %, the page showing each layer's
level as a bar. It is kept in the sound, the USER sounds andsidou-patch/1; an older sound
reads at full level. Which layers the filter takes is FILTER's K3 VOICES. - Aftertouch adds vibrato on every sound by default, as the mod wheel does.
- Fixed: a second knob while a popup shows no longer sends a frame over 200 cells; a text
song's first row plays at its tempo.
A new manual page, SIDOU from a DAW,
sets a sequencer up for each MIDI mode, the clock, USB audio recording and Bluetooth.
On the site
- Sounds from a
.sidtune. After the Library page converts a tune, the instruments it found
are listed as LAB sounds, with their voice, the notes that use them and what LAB could not hold.
Listen, keep (16 in the browser, all as a bank), edit as text, send to the FM-1 or copy a link.
Nothing is uploaded, and the original's copyright applies to the sounds.
Measured
The image is 567,540 bytes, 11,976 under its ceiling of 579,516. RAMTEXT holds 45,920 bytes of
its 48 KB. The site's core is 167,274 bytes of its 176 KiB, the patch module 85,842 of its 88 KiB,
the tune module 78,646 of its 96 KiB.
Tested on a real FM-1 (2026-11-18, hardware-test.md sections 42 and 43): the second core (an
FPU on core 1, 30 minutes of chip B on it with no misread, core 0's audio time measured, a
restart), a layer's level, aftertouch's vibrato, MULTI's four parts, PUNCH's pads and WHOLE A's
POLY, CHORD and ARP, measured from the FM-1's USB audio; the release package itself:
2026-11-18, hardware-test.md sections 42 to 44: chip B on core 1 through a 30-minute soak, its audio time on core 0 halved; a layer's level, aftertouch, MULTI and WHOLE A measured over USB; PUNCH, the LAYERS card and the keyboard's reconnection by the owner; a .sid tune's sound converted on the site, sent and played; then this package installed over the tested build, 2.0.0 on ABOUT.
The full list is in CHANGELOG.md.
Install
Over USB, at your own risk; the official firmware is one install away. Use Felucca's installer:
fm1_install.py sidou-2.0.0.fwsc, from the stock firmware, a Felucca-family firmware or an
earlier SIDOU (it finds the FM-1 as "SIDOU FM-1"). Your songs and settings are kept. Coming from
before 1.20, send RED MOON RITE's art from the
Library page. Back to stock: install M-VAVE's
FM-1.fwsc the same way. Holding OCT- at power-on is a rescue.
sidou-2.0.0.fwsc, identity FM-1_964, SHA-256 e285a67e7ae461544a06826abc780ce6f55a8280df50dbc4bed4d65ace712087.