Skip to content

Text to Image

eduardoabreu81 edited this page Oct 15, 2026 · 1 revision

Text to Image

The flux3 preset for the distilled model: Euler, schedule FLUX.3, 16 steps, CFG 1, empty negative prompt. Autoencoder flux2-vae.

Red fox

A red fox asleep in the snow

Full-color photograph, eye-level medium shot in late afternoon sunlight: a red fox curled asleep in fresh snow at the edge of a pine forest, warm side light on its fur, soft blue shadows, shallow depth of field, the trees behind it blurred

flux3_image_klein_sd_int8_convrot, text encoder qwen3vl_4b_int8_convrot, 1024×1024, seed 42 - about 25 seconds once the model is loaded. Krea 2's qwen3vl_4b_fp8_scaled gives practically the same picture.

Concrete church: distilled and base

Church, distilled
distilled - 16 steps, CFG 1
Church, base
base - 50 steps, CFG 3.5

The prompt and settings of Black Forest Labs' own base_vs_distilled/church example (832×1248, seed 1), text encoder qwen3vl_4b_fp8_scaled:

Full-color indoor large-format photograph in a vertical 4-by-5 composition, showing the interior of a brutalist concrete church from a low, wide-angle viewpoint. Massive raw concrete walls rise around a cavernous nave, their surfaces marked by formwork seams, pinholes, chipped corners, and broad geometric planes. In the upper center, a narrow rectangular opening cuts through the thick wall as one slot of hard daylight falls diagonally into the otherwise dark sanctuary. The bright beam forms a single pale shaft across the center, revealing suspended dust particles against deep grey-brown shadow. One empty wooden pew stands alone within the light, placed off-center in the lower middle of the frame and facing the unseen altar beyond it. Its long plank seat has a dull brown finish, worn edges, visible grain, and two heavy supports; the backrest is bare, with no person or object resting on it. Behind the pew, the concrete architecture expands into angular buttresses and an overhanging ceiling slab that disappears into darkness. On the left, a recessed wall remains nearly black, while the right side contains a massive cantilevered concrete volume with a rough aggregate texture. At the far end, the daylight slot ends at a small altar-like projection of unadorned concrete, but its details remain lost in shadow. The floor consists of broad poured-concrete slabs with hairline joints and scattered grit. The concentrated beam illuminates only the pew and a thin patch of floor beneath it, leaving the surrounding nave in dense shadow.

The distilled model takes about 30 seconds; the base model, with 50 steps and two passes per step for CFG, about 166 seconds with flux3_image_klein_int8_convrot and 247 seconds with flux3_image_klein_bf16, which give practically the same picture. The base model is meant for LoRA training and research; for pictures, the distilled model is faster and as good.

Clone this wiki locally