Skip to content

v0.8.0 — a cavity at the facet, a passband from the stack, a laser's own noise, and a receiver's equaliser

Choose a tag to compare

@ehsun-sh ehsun-sh released this 18 Sep 18:36
· 124 commits to main since this release

pip install maiman==0.8.0

Four pieces of physics that were compact numbers or missing in 0.7.0. Every one is opt-in, so no result from an earlier release moves.

An edge coupler's facets are a cavity

EdgeCoupler(etalon=True) sums the reflections between the fibre's facet and the chip's bounce by bounce, each beam diffracting over its own path with its own Gouy phase. Where nothing diffracts it is the Airy function of a thin film (5e-5); at zero gap it is one interface (1e-12); against a brute-force angular-spectrum propagation of the same cavity it agrees to 2e-4, and to 7e-3 at six degrees of fibre tilt.

Fifty microns of air ripples by 0.49 dB, fringes c / 2g apart. Tilting the fibre walks each bounce off the chip mode, and eight degrees takes the ripple to 0.04 dB — which is why fibre arrays are polished at an angle.

A grating coupler's passband from its stack

GratingCoupler(from_stack=True) computes what the PDK's two numbers stood for. The share of light going up rather than into the substrate comes from the silicon, the buried oxide and the substrate as a thin-film stack, checked against every layer's boundary conditions solved at once to 1e-12. The grating's exponential beam meets the fibre's Gaussian at best 80.1 %, the literature's number; and as the emission angle turns with wavelength while the fibre's does not, the overlap falls — which is the passband.

220 nm of silicon on 2 µm of oxide comes to 3.19 dB and 35.7 nm from its geometry alone. A 2.2 µm oxide buys back 1.1 dB.

A laser's own noise

DirectlyModulatedLaser(noise=True) and maiman.laser carry the textbook Langevin forces and nothing else. What the textbooks derive from them comes out:

Schawlow–Townes Henry measured
α = 0 3.23 MHz 3.23 MHz 3.08 MHz
α = 4 54.9 MHz 56.2 MHz

Henry's factor of seventeen is written nowhere in the integration. The intensity noise peaks at 5.07 GHz, where the laser rings (5.09).

integrate_multimode gives a Fabry–Perot laser its longitudinal modes on one carrier reservoir. The modes trade power, so the total is quiet — a twentieth of the sum of their noise for seven modes — and dispersed_power shows the cancellation undoing itself after a span: seven times the laser's own noise at 60 km. Mode partition is computed at the laser rather than in a link, because bands here are carried in their own retarded frames; the README says so where it applies.

An equaliser for a receiver in the field

FFEDFEEqualizer takes two samples a symbol with fractional: sampled half a symbol late, a symbol-spaced FFE is left with six percent of its symbols wrong; a T/2-spaced one decides every symbol at any phase. With blind it trains on its own decisions — landing exactly on the reference-trained taps up to a postcursor of 0.4, and failing at 0.5, which the tests keep in view.


64 components, 1686 tests, every physics block checked against a closed-form or independently computed result in CI.

🤖 Generated with Claude Code