v0.3.0

Added

• get_temperatures(): temperature sensors from the ENTITY-SENSOR-MIB, in degrees Celsius with
  name and status. On the HPE Instant On 1930 8G 2SFP (JL680A), which has no standard sensor
  table, from its vendor table (measured on firmware 3.4.0.0; read only on that model). A sensor
  that reports itself not ok, or a scale or precision outside RFC 3433, gives no reading.
  Diagnostics count the sensors; recordings include these tables.

Fixed

• A value directly under a table column, without a row index, no longer makes a getter raise
  (found by the robustness test, for example in the address table).

Documentation: https://aiosnmpswitch.eize.dev/

v0.2.0

Added

• get_chassis(): product name, model name and firmware of the chassis from the ENTITY-MIB, for
  switches whose sysDescr does not split into model and firmware. The diagnostics show it, and
  recordings include these three columns (no serial numbers).

Documentation: https://aiosnmpswitch.eize.dev/

v0.1.0

First release.

Added

• SnmpSwitch with one getter per MIB group: system, interfaces (ifTable, ifXTable), bridge
  ports, address table (Q-BRIDGE-MIB, BRIDGE-MIB), spanning tree, LLDP, trunks (LAG-MIB), PoE
  (POWER-ETHERNET-MIB) and the neighbour cache (IP-MIB).
• SNMPv1, v2c and v3 (all authentication and privacy protocols pysnmp offers).
• helpers.locate_macs(): the port every device is connected to, across several switches, with
  uplinks found through LLDP and trunk members located on their trunk.
• create_engine(): a pysnmp engine prepared in a worker thread, to share between switches.
• aiosnmpswitch-diagnostics: a report without addresses or port names, and recordings for test
  fixtures.
• Tested on HPE OfficeConnect 1920S (PD.02.22) and HPE Instant On 1930 (3.4.0.0).

Documentation: https://aiosnmpswitch.eize.dev/