minitone-1.0.5

• Fixed the noise issue with the ELEK reverv

minitone-1.0.4

• EUCLID 2, a second page for the EUCLID mode (after the Digitone 2's): a second rhythm B with its own LEN, PULSES and ROT, combined with A step by step by a boolean operator. OP (KNOB 1) is OFF, AND (both hit), OR (either), XOR (one of them) or SUB (A without B). B loops on its own length against A's, so the pair repeats after lcm(LEN A, LEN B) steps. The page draws A, B and the result, the step playing outlined (OFF keeps B's numbers). It shows with EUCLID on, after the EUCLID page. B is saved with the project in bytes of the stochastic settings that were unused, so the project format and its size do not change and projects saved before load with B off

• DUALVCO's CNFG explained on screen: the MIX page keeps the scope, shorter, and under it says what the picked configuration is, for example *S+T reads "SINE + TRIANGLE / OSC 1 AND OSC 2 MIXED / PHASES RESTART AT EACH NOTE" and ZFMZ "SINE/SAW FM SINE/SAW / FM: OSC 2 MODULATES OSC 1 / PHASES RUN ON". The letters are the waves (S sine, K bent sine, T triangle, Z sine/saw, A saw), then the mode (+ mix, R ring, FM, F+R FM then ring modulated by oscillator 2), and a * first means the phases restart at each note. The text is built from the CNFG number, so it costs next to no flash

minitone-1.0.3

What changed since 1.0.2:

• A new TR808 engine: a TR-808 of 16 voices (bass drum, snare, three toms and three congas, rim shot, claves, maracas, clap, cowbell, closed and open hats, cymbal), the circuit models of the 8W8 module for Ableton Move (GPL-3.0) rewritten in fixed point and checked against its own renders (Engines, below). General MIDI notes strike the voices, a hit on a ringing drum adds to it, and a closed hat cuts the open one
• EUCLID mode (after the Digitone 2's): a track plays an Euclidean rhythm E(PULSES, LEN) turned by ROT, in a loop of its own (a polymeter against the pattern's LEN), instead of its pattern (SEQ > EUCLID, one layer; exclusive with STOCHASTIC)
• SEQ shows the pages of the track's generator mode only: OFF the STOCH page (its MODE), STOCHASTIC its four, EUCLID STOCH and EUCLID
• The web editor follows the firmware again: six tracks, the 25 engine numbers, the 111-parameter layout (LFO 2, the INSERT, SPREAD, QUANTIZE, ENV SYNC), each engine's own EDIT pages, the delay TIME as the device shows it; web/sync_mock.mjs regenerates its tables from the firmware (tests/descdump.c) so they cannot drift. The editor protocol names enums up to 32 values (24 before, the engine list has 25)

minitone-1.0.2

Sloop 2.8's sequencer features, ported onto Mini-Tone's own steps
a sheet on SEQ > STEP and on the drum grid: hold OCT+ for NOTE, PITCH, LEN, FORCE, RATCH, SLIDE, NUDGE, FILL, MOVE, COPY and DELETE (the drum grid's: ACC, RATCH, NUDGE, FILL, MOVE, COPY, DELETE); PRESETS zooms the roll to 8, 16, 32 or 64 steps
per-note force (GHOST, SOFT, NORM, HARD, ACC) and per-note ratchet (each note of a chord x2..x4 on its own)
FILL conditions: a step plays only during a fill, or only outside one; hold GLO + E4 for a fill, GLO + D#4 for the next bar
nudge in 64ths of a step (it was sixteenths); live recording keeps your timing at that resolution; on SEQ > STEP KNOB 1 is the note's START, a 64th a detent, on into the next step and so on (PRESETS now moves the cursor)
the playing section's letter (A..D) on each row of HOME > TRACKS while a song plays
the extra step data is saved with the project (in its extension; projects of 1.0.0 load as they were), not with user presets or in the web editor
STOCHASTIC mode (after the OXI ONE's): a track generates its steps as they come, from odds you set, instead of playing its pattern (SEQ > STOCH, NOTES, SHAPE, STACK; see Controls). The pattern rests untouched, and LOCK writes what it draws into the pattern
KNOB 1 on SEQ > STEP is the note's START, a 64th of a step a detent and on into the next step (see Controls)

minitone-1.0.1

New SID engine, a lot better to my ears than the previous one
The resonnance of the Elektron engines has been enhanced (self resonnance)
DELAY: time now has 16 note values: the old ten (the stored ids are unchanged) plus the dotted 1/4D, 1/8D, 1/16D, 1/32D, 1/2D and 1/1D
Step length: It now steps by one, and 15 or 7 are reachable
New algoritghm diagram for the FMTONE engine

minitone-1.0.0

Initial release with 7 new engines (5 based on the Elektron machines)