Skip to content

Releases

Pinna 0.6.0-beta.2

Pinna 0.6.0-beta.2 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 21 Nov 22:31

MCP servers with many tools, such as ha-mcp with its 77, now work. A server that lists more than 32 tools is added with them off, All on and All off switch a server's tools at once, and the page says when the brain's limit leaves tools out.

Before you update

This is a beta: it goes to satellites whose Updates setting is beta.

  • A server you added earlier keeps its tools on. Only a server you add,
    or whose address you change, after the update starts with its tools off. A
    server that failed before with "response is too large", such as ha-mcp, now
    lists all of its tools, all of them on. A server that offered 32 tools can
    now offer up to 128. If Assistant › Tools says that tools are left
    out, select All off under the server's Its tools and turn on the few
    a voice request needs.

Highlights

MCP servers with many tools work

ha-mcp lists 77 tools in a reply of almost 300 KB. The satellite read at most
256 KiB and kept 32 tools of a server, so such a server failed with "response
is too large". It now reads tool lists up to 1 MiB and keeps up to 128 tools
of a server. An expired tool list no longer holds up a voice request: the
satellite answers with the list it has and asks the server again in the
background.

A big server's tools start off

When you add a server that lists more than 32 tools, or change its address,
all of its tools start off. Most of ha-mcp's tools manage Home Assistant
itself, such as removing automations, so turn on only the few a voice request
needs. Under Assistant › Tools, Its tools starts with All on
and All off, and the server's row says how many tools are on, such as
0 of 77 tools on. All on asks first for a server with more than 32
tools.

The brain's 64-tool limit is in view

The brain takes at most 64 tools in a request: Pinna's first, then each
server's in the order the page lists them. Tools past 64 were left out without
a word. While more than 64 are on, the Tools page now says how many are left
out, and System › Logs names the first one for each request. See
Add an MCP server.

Other changes

  • A tool's row shows its own name, and its description is cut at three lines,
    so a long list can be scanned on a phone.
  • All on, All off and Its tools name their server to a screen
    reader, and keep the focus while a save runs.

Fixed

  • Renaming an MCP server left its tool switches under the old name, so all of
    its tools were on again. The switches now follow the rename. Deleting a
    server deletes its switches, so adding it again starts afresh.
  • With a big server's switches stored, every tool switch, All on and
    All off could be refused with "At most 128 tool switches." The limit is
    now 1100.
  • A server's Its tools row reads as part of the server, not as an entry of
    its own.

All changes

Changes since 0.6.0-beta.1.

New

  • Read tool lists up to 1 MiB and refresh them in the background (pinna-mcp)
  • An MCP server with more than 32 tools is added with them off (pinnad)
  • The brain logs the tools its 64-tool limit leaves out (pinna-assist)
  • An MCP server's tools turn all on or off, with the brain's limit in view (dashboard)

Fixed

  • An MCP server's tool list reads as part of its server (dashboard)
  • An MCP server's tool switches follow its rename and go with it (pinnad)
  • A big MCP server says why its tools are off, and All on asks first (dashboard)

Files

Install: https://getpinna.dev/docs/flash/
Signed with keys/release.pub: 1170dfc308acae842fd81cbff011ecf33f2c0feb056fa2ec9998bc012fc9f706

becae094f8f3d47b0a15f3e9ff6613896e696925f4ddfe0e2c8be94abc3d4eda  pinna-0.6.0-beta.2.root.img
dd6d6dd7e4853084e4cf3915f47c6bc76705bf9d1c42945ed07ccfb8dc1f3f5b  pinna-boot.img
f9aee4f40d97c6c94b84352a4671114f53f50ebeff069f425128893239b41005  manifest.json
64635239ecfd4252a1dae47eeea200174e8f19bc8bb1905e5ec9e120394b65af  manifest.json.sig
754bf31599889b139a23e2bd49872c1c9d14b4f4bde401be533d17fab652d4c3  flash-gen2.sh

Pinna 0.6.0-beta.1

Pinna 0.6.0-beta.1 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 21 Nov 14:10

Saying the wake word while the satellite talks now interrupts it more often: the wake word hears a stream of its own, with its own echo cancellation. The echo cancellation's reference no longer arrives late, and the microphones are louder.

Before you update

This is a beta: it goes to satellites whose Updates setting is beta.

  • The wake word hears a new stream. On the Echo Dot (2nd gen) and the
    Echo (2nd gen), the wake word detection listens to a stream with its own
    echo canceller. It was measured by replaying recordings from an Echo Dot
    (2nd gen), and hasn't run on an Echo yet. If that stream delivers nothing
    for a second, the satellite goes back to the old one by itself. If the wake
    word stops answering, or wakes when nobody said it, go back to 0.5.0, as
    Go back to an older version
    describes.

Highlights

Interrupt a reply with the wake word

The echo cancellation that Home Assistant and standalone requests hear also
mutes a person who talks while the satellite plays. The wake word detection
now hears a stream of its own instead: the same microphones, with a simpler
echo canceller that removes the satellite's own sound and leaves your voice.
In recordings from an Echo Dot (2nd gen) with a talker 1 m away, the wake
word was detected over a spoken reply 5, 2 and 4 times out of 5 at volumes 50,
60 and 70, against 0, 0 and 1 before, and the reply alone didn't wake it at
volumes 50 to 80. Requests still use the echo-cancelled stream. See Microphones.

Other changes

  • The microphones are routed at 0 dB instead of -6 dB. On an Echo Dot (2nd
    gen), every microphone got 5.5 to 6.2 dB louder.
  • The root image carries the Wi-Fi firmware of the Echo Dot (3rd gen), and
    the kernel for it is built. Pinna doesn't run on that device yet.

Fixed

  • The echo cancellation's reference, the copy of what the satellite plays,
    arrived about 2 seconds after its echo, so it cancelled nothing. It now
    arrives before it. Measured on an Echo Dot (2nd gen) at volume 70: 11 dB
    cancelled over a spoken reply, and 35 to 48 dB while nobody talks.
  • After PipeWire restarted, the echo cancellation had no reference until
    pinnad restarted. The reference now starts again by itself.
  • One of the seven microphones could be switched off after a start. The
    satellite now checks the microphone settings once it records, and sets
    again any that don't hold.
  • On a phone, the dashboard's top bar shows the mark without the live ring
    beside it.

All changes

Changes since 0.5.0.

New

  • An arm64 kernel runs the armhf image as 32-bit programs, checked under QEMU (kernel)
  • The MT8516 kernel, with the Echo Dot (3rd gen) board (kernel)
  • MT7668 Wi-Fi for the MT8516 Echos (kernel)
  • LK's 64-bit layout for the MT8516 Echos (pinna-bootimg)
  • Firmware comes from a folder per board and Fire OS release, the Echo Dot (3rd gen)'s too (scripts)
  • The root carries the Echo Dot (3rd gen)'s Wi-Fi firmware (image)
  • A linear echo canceller for the wake word (pinna-audio)
  • The pinna_wake plugin, the wake word's own stream (pinna-ladspa)
  • The wake word detector hears its own stream on the Echo Dot (pinnad)
  • The Echo Dot graph gets the wake word's stream, dot_wake (image)

Fixed

  • The MT7668 Wi-Fi driver reads its configuration as wifi_mt7668.cfg (kernel)
  • The phone's top bar shows the mark without the live ring beside it (dashboard)
  • The echo reference reaches the canceller before its echo (pinna-audio)
  • Route the Echo microphones at 0 dB instead of -6 dB (pinna-audio)
  • The echo reference starts pw-play again when it exits (pinna-audio)
  • pinnad checks the microphone settings once capture runs (pinna-audio)
  • The end of speech keeps its noise seed from dot_mic_aec (pinnad)

Files

Install: https://getpinna.dev/docs/flash/
Signed with keys/release.pub: 1170dfc308acae842fd81cbff011ecf33f2c0feb056fa2ec9998bc012fc9f706

791ac0c2cc09c53347d58bb7eaa530475bf5a5e52206ceb4bde63b66e6e8fcd9  pinna-0.6.0-beta.1.root.img
b8691dcf2e671332968bcff1c000bb7294a240b65b799ce4ef1eb4be952d05e9  pinna-boot.img
014b7d83613b2a7376824dcb821759ba4dfd5e4fb1c33e2d98771578099d14fa  manifest.json
b39125f4320426e087c692810077a639d9f8dbaed521e6e15b948b5b54ffbb10  manifest.json.sig
754bf31599889b139a23e2bd49872c1c9d14b4f4bde401be533d17fab652d4c3  flash-gen2.sh

Pinna 0.5.0

Choose a tag to compare

@github-actions github-actions released this 21 Nov 10:25

Satellites in standalone mode can form a group that passes messages and acts on each other. You can add your own wake words, play music from Music Assistant over Sendspin, and protect the dashboard with a password.

Before you update

  • The Wi-Fi driver changed. The setup hotspot needs a part of the MT8163
    Wi-Fi driver that 0.3.0 left out. The update's health check doesn't need
    Wi-Fi: if the satellite doesn't join your network after the update, it
    stays on the new version, and you reach it only over USB. Keep the cable at
    hand, and see Recovery.
  • The dashboard offers a password. The first time you open it after the
    update, it asks you to set one or to leave it open. Leaving it open changes
    nothing. Before you set one: Prometheus and agents that call /metrics or
    /mcp need tokens, which you can create first. If you later go back to
    0.3.0, that version doesn't ask for the password.
  • Pinna finds the hardware in a new way. The code that finds the ring,
    the buttons, the microphone switch and the sound card was rewritten to read
    one description of each Echo. Nothing should change, but this is tested in
    the virtual machine, not yet on an Echo. If the ring, a button or the sound
    stops working after the update, go back to 0.3.0, as
    Go back to an older version
    describes.

Highlights

Satellite groups

Satellites in standalone mode on the same subnet can form a satellite group.
Ask one to pass a message, such as "tell the kitchen that dinner is ready",
and the satellite in the kitchen says it in its own voice. A satellite that is
busy holds up to 5 messages and plays them once it is Idle. The brain can also
act on another member by its name: "turn the kitchen down", "set a 10 minute
timer in the office" or "stop the music in the hall". Set the group up on each
satellite's dashboard under Assistant > Satellite group, where Group
messages
and Control from the group turn either part off for that
satellite. If two satellites of a group hear the wake word, both still answer:
choosing one is planned. See
Satellite groups.

Add your own wake word

Open Voice & sound > Wake words to add up to eight wake words of your own:
a phrase and its openWakeWord model, an .onnx or .tflite file of at most
2 MiB. The satellite tests the model in a process of its own before it keeps
it, and if it refuses the model, the page says why. Pinna can't run
microWakeWord models, and says so when you add one. Choose the new word like
the built-in ones, on Voice & sound or in Home Assistant. See
Add your own wake word.

Play music with Sendspin

Turn on Sendspin under Voice & sound > Media sources, or with the
Sendspin switch in Home Assistant. Music Assistant 2.10.7 or later then
lists the satellite as a player and plays to it in step with the other
Sendspin speakers of a group. The wake word keeps working, and replies,
announcements and timer alarms play over the music. Sendspin is experimental
and off until you turn it on. It is tested against Music Assistant's server on
a computer, not yet on an Echo. See
Play music with Sendspin.

A password for the dashboard

To set one, open System > Password and tokens, select Set a password…,
and press Action on the satellite when the ring circles white. With a
password, the dashboard, the control API and the log need you to be signed in,
and the metrics and /mcp need
tokens.
It also closes the ESPHome API to a Home Assistant that has no key for the
satellite yet, and group joins, until you open them. The password travels
unencrypted, so use one that you use nowhere else. See
Who can use the dashboard.

New in Home Assistant

  • Group messages (switch): whether the satellite takes messages from the
    other satellites of its group, for example turned off by an automation at
    night.
  • Sendspin (switch): turns the Sendspin player on or off.
  • Install updates (select): Manually or Automatically.
  • Install window start and Install window end (time): when automatic
    installs may happen, in the satellite's time zone.
  • The Wake word and Wake word 2 selectors list the words you added.

Other changes

  • Updates can install by themselves in a window you choose, 03:00 to 05:00
    unless you change it: set Install updates to Automatically on
    System > Updates. The satellite restarts only when it is Idle, and
    Manually stays the default. See
    Install updates automatically.
  • A satellite with no saved Wi-Fi network opens a setup hotspot, Pinna
    setup
    followed by its hostname, with the password pinnasetup. Join it
    with your phone and choose your network. It is tested in the virtual
    machine, not yet on an Echo. See
    Connect to Wi-Fi.
  • In standalone mode, ask "is there an update?": the satellite says which
    version it runs and checks for a new one. It installs one only once you turn
    on Install update under Assistant > Tools. See
    Ask the satellite to update.
  • System > Record audio records up to 30 seconds of what the satellite
    hears, for a developer to see why the wake word or the echo cancellation
    misbehaves. It needs a dashboard password and a press of Action. See
    Record what the satellite hears.
  • Copy for an issue on System > Logs copies the version, the model, how
    the last start ended and the log, without addresses or Wi-Fi names. See
    Report a problem.
  • The log fills the window and follows the newest line while you are at the
    bottom.
  • System opens pages for Updates, Password and tokens and
    Logs, and the ring's settings have their own page under Voice &
    sound > Ring
    .
  • The dashboard shows Pinna's new mark.
  • The satellite reports its release version to Home Assistant, in its logs
    and in --version, instead of 0.1.0.
  • The log names the level, the automatic gain and the score of each wake word.

Fixed

  • Two changes close together, such as a new name and a new key from Home
    Assistant, no longer leave the older of them in the satellite's mDNS record.
  • Rescue mode and the dashboard link to the docs at getpinna.dev.

All changes

Changes since 0.3.0.

New

  • The ring settings have their own page under Voice & sound (dashboard)
  • The brain tells the version and update state and checks for updates (pinnad)
  • The brain installs an update once the owner turns the tool on (pinnad)
  • Binaries report the release version instead of 0.1.0
  • The capture loop logs each wake word's level before the gain (pinnad)
  • PeerService carries signed calls between satellites in a group (proto)
  • Group membership rules and signatures (ADR 0026) (pinnad)
  • The mDNS record can carry the satellite's group (pinna-esphome)
  • The search reads each satellite's group and counts its searches (pinnad)
  • The satellite group is saved in standalone.toml with its key in secrets.toml (pinnad)
  • The dashboard reads the satellite group and its candidates (pinnad)
  • The mDNS record carries the satellite's group from boot (pinnad)
  • A group's signature names the call it was made for (pinnad)
  • The dashboard adds and removes satellite group members through PeerService (pinnad)
  • Members exchange the group's list after each search and leave a group that ended (pinnad)
  • Group messages is a setting and a Home Assistant switch (pinnad)
  • A member says a message from another member, or holds it until it is free (pinnad)
  • The brain sends a message to a member or to all of them (pinnad)
  • The brain's context names the other members of the satellite group (pinnad)
  • A member runs a tool call from the group as its own /mcp would (pinnad)
  • The brain acts on another member's satellite by its name (pinnad)
  • The Assistant page sets up the satellite group (dashboard)
  • The Overview shows how many messages are held (dashboard)
  • Test an uploaded wake word model on silence, noise and time (pinna-wakeword)
  • The device can replace the wake words it offers (pinna-esphome)
  • Owners add and remove custom wake words, tested in a process of their own (pinnad)
  • Add and remove custom wake words (dashboard)
  • Build the MT8163 Wi-Fi access point (kernel)
  • A hotspot unit that runs hostapd on ap0 (image)
  • A satellite with no saved Wi-Fi network runs a setup hotspot (pinnad)
  • The Network page shows the setup hotspot (dashboard)
  • The API carries the Sendspin player's status and switch (pinnad)
  • The player completes the Noise handshake as responder with the key the server names (pinna-sendspin)
  • Binary frames and JSON messages are read within the specification's limits (pinna-sendspin)
  • The player follows the server's clock with the specification's time filter (pinna-sendspin)
  • The player keeps a pairing key and up to eight pairings (pinna-sendspin)
  • A sans-IO connection runs a player session from client/init to playback (pinna-sendspin)
  • Decode Sendspin audio chunks, PCM and FLAC (pinna-audio)
  • The speaker session anchors its frame times to the hardware pointer (pinna-audio)
  • The media lane plays a timed source at the time a server's clock sets (pinna-audio)
  • Media sources switches the Sendspin player on and shows its status (dashboard)
  • The Sendspin player keeps its keys, pairings and volume (pin...
Read more

Pinna 0.5.0-beta.2

Pinna 0.5.0-beta.2 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 20 Nov 19:37

A fix for the setup hotspot, which refused every phone and computer that tried to join. In the dashboard, updates, the password and tokens, and the satellite group have pages of their own.

Before you update

This is a beta: it goes to satellites whose Updates setting is beta.

  • The Wi-Fi driver changed again. The fix for the setup hotspot is in the
    MT8163 Wi-Fi driver, and that kernel hasn't run on an Echo yet. It changes
    only what the hotspot advertises; joining your network works as before. The
    update's health check doesn't need Wi-Fi: if the satellite doesn't join your
    network after the update, it stays on the new version, and you reach it only
    over USB. Keep the cable at hand, and see
    Recovery.

Highlights

Settings have pages of their own

System is now a short page with rows that open Updates, Password
and tokens
and Logs. Each row says first what needs a look: a failed
install, updates turned off, no password set, or a last start that crashed.
The satellite group moved from Assistant to its own page,
Assistant > Satellite group. Links to #/updates still open the updates.
See What the dashboard shows.

Other changes

  • The Updates row says when a developer's update address replaces the
    channel.
  • The dashboard shows Pinna's new mark, and sub-pages in the sidebar hang from
    a line under their section.
  • The kernel's drivers and patches that come from LibreEcho credit it.

Fixed

  • The setup hotspot advertises the basic rates a client has to support, so
    phones and computers are no longer refused when they join. Not yet tested
    on an Echo.
  • When /metrics or /mcp refuse a request without a token, the message says
    where to create one: System › Password and tokens.
  • On System, the rows read as plain sentences, and the sidebar lists the
    pages in the same order as the page.

All changes

Changes since 0.5.0-beta.1.

New

  • Updates, and the password and tokens, get their own pages under System (dashboard)
  • The satellite group gets its own page under Assistant (dashboard)
  • The Updates row says when a developer's address replaces the channel (dashboard)
  • The Logs row on System looks like the rows beside it (dashboard)

Fixed

  • The token refusals point to System > Password and tokens (pinnad)
  • System's rows read plainly, and its pages are listed in the hub's order (dashboard)
  • The token refusals write the dashboard path as the dashboard does (pinnad)
  • Credit LibreEcho in the ported drivers and patches (kernel)
  • The setup hotspot advertises the basic rates it requires (kernel)

Files

Install: https://getpinna.dev/docs/flash/
Signed with keys/release.pub: 1170dfc308acae842fd81cbff011ecf33f2c0feb056fa2ec9998bc012fc9f706

ac163642695cfcdf905ef248ebb0114810642e34f8b8ab9abbae93b800266376  pinna-0.5.0-beta.2.root.img
580340d1befbc9d954d54e8fd91760bb792b344a58dfae2436bad271b7d3a7e7  pinna-boot.img
16a809a283c21fc8b5b08270b09e5162b2378f2dfe21e0867fe23cf6a8c06dc5  manifest.json
317d334ec4b21e5f2ed665733892a09efe4b88f458a6ea6234cfaeefe21e0232  manifest.json.sig
754bf31599889b139a23e2bd49872c1c9d14b4f4bde401be533d17fab652d4c3  flash-gen2.sh

Pinna 0.5.0-beta.1

Pinna 0.5.0-beta.1 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 20 Nov 08:47

Music Assistant can play to the satellite over Sendspin, in step with other speakers. The dashboard can ask for a password. Updates can install by themselves in a window you choose, and a satellite without Wi-Fi opens a setup hotspot.

Before you update

This is a beta: it goes to satellites whose Updates setting is beta.

  • The Wi-Fi driver changed. The setup hotspot needs a part of the MT8163
    Wi-Fi driver that earlier releases left out. That kernel hasn't run on an
    Echo yet. The update's health check doesn't need Wi-Fi: if the satellite
    doesn't join your network after the update, it stays on the new version,
    and you reach it only over USB. Keep the cable at hand, and see
    Recovery.
  • The dashboard offers a password. The first time you open it after the
    update, it asks you to set one or to leave it open. Leaving it open changes
    nothing. Before you set one: Prometheus and agents that call /metrics or
    /mcp need tokens, which you can create first. If you later go back to
    0.4.0-beta.3 or older, that version doesn't ask for the password.

Highlights

Play music with Sendspin

Turn on Sendspin under Voice & sound > Media sources, or with the
Sendspin switch in Home Assistant. Music Assistant 2.10.7 or later then
lists the satellite as a player and plays to it in step with the other
Sendspin speakers of a group. The music goes through the satellite's own audio
processing, so the wake word keeps working, and replies, announcements and
timer alarms play over it. Sendspin is experimental and off until you turn it
on. It is tested against Music Assistant's server on a computer, not yet on
an Echo. See Play music with Sendspin.

A password for the dashboard

The dashboard can ask for a password. To set one, select Set a password…
on System under Dashboard password, and press Action on the
satellite when the ring circles white. With a password, the dashboard, the
control API and the log need you to be signed in, and the metrics and /mcp
need tokens.
It also closes the ESPHome API to a Home Assistant that has no key for the
satellite yet, and group joins, until you open them. The password travels
unencrypted, so use one that you use nowhere else. See
Who can use the dashboard.

Install updates automatically

Set Install updates to Automatically on System, under
Updates. The satellite then installs a new release by itself at a random
minute inside your install window, 03:00 to 05:00 unless you change it, and
restarts only when it is Idle, with no timer set and nothing playing. A
release that needs a new boot image, or a version that was rolled back, never
installs by itself. Manually stays the default. See
Install updates automatically.

Set up Wi-Fi from your phone

A satellite with no saved Wi-Fi network, such as a newly flashed one, runs its
own network, Pinna setup followed by its hostname, with the password
pinnasetup. Join it with your phone, and the dashboard opens: choose your
network on Network. This needs no cable, which helps on the Echo (2nd
gen), whose USB is in its base. The hotspot is tested in the virtual machine,
not yet on an Echo, and the USB cable still works. See
Connect to Wi-Fi.

New in Home Assistant

  • Sendspin (switch): turns the Sendspin player on or off.
  • Install updates (select): Manually or Automatically.
  • Install window start and Install window end (time): when automatic
    installs may happen, in the satellite's time zone.

Fixed

  • In a satellite group, the dashboard marks another satellite as a member only
    when it announces the address that the member's signed calls come from.
    Before, a device on your network could copy a member's MAC address to look
    like it.

All changes

Changes since 0.4.0-beta.3.

New

  • Build the MT8163 Wi-Fi access point (kernel)
  • A hotspot unit that runs hostapd on ap0 (image)
  • A satellite with no saved Wi-Fi network runs a setup hotspot (pinnad)
  • The Network page shows the setup hotspot (dashboard)
  • The API carries the Sendspin player's status and switch (pinnad)
  • The player completes the Noise handshake as responder with the key the server names (pinna-sendspin)
  • Binary frames and JSON messages are read within the specification's limits (pinna-sendspin)
  • The player follows the server's clock with the specification's time filter (pinna-sendspin)
  • The player keeps a pairing key and up to eight pairings (pinna-sendspin)
  • A sans-IO connection runs a player session from client/init to playback (pinna-sendspin)
  • Decode Sendspin audio chunks, PCM and FLAC (pinna-audio)
  • The speaker session anchors its frame times to the hardware pointer (pinna-audio)
  • The media lane plays a timed source at the time a server's clock sets (pinna-audio)
  • Media sources switches the Sendspin player on and shows its status (dashboard)
  • The Sendspin player keeps its keys, pairings and volume (pinnad)
  • The Sendspin player listens, plays on the server's timeline and reports (pinnad)
  • Home Assistant gets a Sendspin switch (pinna-esphome)
  • The Sendspin switch starts the player, follows renames and shows in Status (pinnad)
  • Pause, play, stop and the media volume act on the Sendspin group (pinnad)
  • /metrics shows the Sendspin player's state and how well it keeps time (pinnad)
  • pinnad.toml can move the Sendspin player to another port and its record to another file (pinnad)
  • Time entities, and the install updates select and window times (pinna-esphome)
  • Updates install by themselves inside the owner's window (pinnad)
  • Choose whether updates install by themselves, and the window (dashboard)
  • A confirm pattern on the ring (pinna-hal)
  • secrets.toml carries the dashboard's password table (pinna-assist)
  • The next Action press confirms a change at the satellite (pinnad)
  • DeviceService calls for the dashboard password (proto)
  • The dashboard asks for a password once one is set (pinnad)
  • The dashboard asks for its password, and sets, changes and removes it (dashboard)
  • The server can refuse connections while it has no key (pinna-esphome)
  • A password closes the ESPHome API, group joins and unprotected members until the owner acts (pinnad)
  • The pages show the windows a password closes, and the rollback warning (dashboard)
  • A waiting confirmation shows who asked and can be canceled (pinnad)
  • Password flows show a waiting confirmation, count waits down and explain themselves (dashboard)

Fixed

  • Clock bursts start less than 10 s apart when the timer fires late (pinna-sendspin)
  • A new pairing never evicts the record of an open connection (pinna-sendspin)
  • Arbitration between idle servers uses the current last-playback server (pinna-sendspin)
  • A server whose clock drifts more than 1 % is closed (pinna-sendspin)
  • Audio counts against buffer_capacity until due on the player's clock (pinna-sendspin)
  • Close reasons quote the server escaped and at most 200 characters (pinna-sendspin)
  • A server that closes before server/init is reported as probably too old (pinna-sendspin)
  • A pause ends a waiting timed source while a stream or another timed source plays (pinna-audio)
  • A Sendspin chunk that decodes to more than a second is refused (pinna-audio)
  • A timed source jumps every error it cannot slew within 1 ms in 10 s (pinna-audio)
  • A format change in place keeps a timed source's speed from its first chunk (pinna-audio)
  • After an underrun the speaker identifies its restarted pointer in seconds (pinna-audio)
  • A stream with no source reads "From AirPlay or Bluetooth" again (dashboard)
  • Sendspin's failure reasons say couldn't, as pinnad's other errors do (pinnad)
  • Music Assistant's group/update with a UUID group_id no longer closes the connection (pinna-sendspin)
  • A format change in place no longer moves a timed source 1.4 frames off its timeline (pinna-audio)
  • A Sendspin server's volume commands keep one write to the flash in flight, at most one every 2 s (pinnad)
  • Stop and a queue that runs out leave a Sendspin satellite Idle, not Paused (pinnad)
  • The media player's volume is the speaker's while a Sendspin group waits paused (pinnad)
  • /metrics shows a playing Sendspin player as connected (pinnad)
  • A satellite leaves a paused Sendspin group once, not at every media update (pinnad)
  • Media sources tells an owner on another VLAN how to add the Sendspin player (dashboard)
  • A URL that fails to open no longer takes the satellite out of its paused Sendspin group (pinnad)
  • Stop shows a paused Sendspin group Idle even when the server takes no stop (pinnad)
  • A server that plays again is remembered as the last one, whatever its connection started with (pinna-sendspin)
  • Media sources and Now playing tell the truth about a Sendspin group (dashboard)
  • An install window refuses a minute past 23:59 (pinnad)
  • Without a session, GetSecurity says only what signing in needs (pinnad)
  • The list of satellites marks a member only at the address its signed call came from (pinnad)
  • A confirming Action press keeps its hold from Home Assistant (pinnad)
  • Switching to manually leaves the restart after an automatic install to the owner (pinnad)
  • The Home Assistant window shows in standalone mode too (dashboard)
  • A waiting confirmation doesn't tell the caller to press Action (pinnad)

Files

Install: https://getpinna.dev/docs/flash/
Signed with keys/release.pub: 1170dfc308acae842fd81cbff011ecf33f2c0feb056fa2ec9998bc012fc9f706

c3a8a1dc578767810c7d73fefe6a4ae759d3be36aaa67ffc9779f550abd6506a  pinna-0.5.0-beta.1.root.img
592e2560941eb4e971100e4127931c2ccca233c073cb440b16081b7db5d43d5b  pinna-...
Read more

Pinna 0.4.0-beta.3

Pinna 0.4.0-beta.3 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 19 Nov 22:45

When you add a microWakeWord model, such as one from microwakeword.com, the satellite now says that it is one, instead of "The model crashed the loader."

Before you update

This is a beta: it goes to satellites whose Updates setting is beta.

Fixed

  • The satellite refuses a microWakeWord model with a reason that names it as
    one. These models are for ESPHome devices such as Voice PE, and Pinna can't
    run them: use an openWakeWord model of the word, .onnx or .tflite. See
    The device refuses a wake word.

All changes

Changes since 0.4.0-beta.2.

Fixed

  • A streaming microWakeWord model is refused as one, not as a crash (pinna-wakeword)

Files

Install: https://getpinna.dev/docs/flash/
Signed with keys/release.pub: 1170dfc308acae842fd81cbff011ecf33f2c0feb056fa2ec9998bc012fc9f706

5f3212f89dc890277c3121796088498c90b258c33d6b3dddc2a4ab83ad186a3e  pinna-0.4.0-beta.3.root.img
6e683f3e24450c052b829a978524cf60d8be5423fedb0031ad0a3f9add3ec474  pinna-boot.img
9a6b79d2b22820149abfc88d6726c4ed27a2dfcb118056c601e720ff0244aa57  manifest.json
78840080c75a2dbf3ed52bdff58419c138ac1541f164d1da8cd41754d1e312b3  manifest.json.sig
b918dff44fac83241901b4a3f5afeed81e142e45d0080c80f70cce62eb2b63a3  flash-gen2.sh

Pinna 0.4.0-beta.2

Pinna 0.4.0-beta.2 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 19 Nov 21:40

You can add your own wake words on the dashboard: a phrase and its openWakeWord model. The satellite tests each model before it keeps it, and Home Assistant offers the new words like the built-in ones.

Before you update

This is a beta: it goes to satellites whose Updates setting is beta.

Highlights

Add your own wake word

Open Voice & sound > Wake words to add up to eight wake words of your
own. Enter the phrase and choose an openWakeWord model, an .onnx or
.tflite file of at most 2 MiB. The satellite tests the model in a process of
its own before it keeps it: the model must load, run fast enough, and stay
quiet on silence and noise. The test takes up to a minute. If the satellite
refuses the model, the page says why, and nothing is kept. Pinna can't run
microWakeWord models. The new word isn't active yet: choose it like the
built-in words, on Voice & sound or, in Home Assistant mode, on the device
page in Home Assistant. Remove next to a word deletes its model. See
Add your own wake word.

New in Home Assistant

  • The Wake word and Wake word 2 selectors list the words you added.
    After you add or remove one, the satellite makes Home Assistant reconnect
    once nothing plays, and the selectors show the new list.

Other changes

  • A word you added whose model is missing, changed or doesn't load shows the
    reason on Wake words. You can't choose it, and Home Assistant isn't
    offered it.

All changes

Changes since 0.4.0-beta.1.

New

  • Test an uploaded wake word model on silence, noise and time (pinna-wakeword)
  • The device can replace the wake words it offers (pinna-esphome)
  • Owners add and remove custom wake words, tested in a process of their own (pinnad)
  • Add and remove custom wake words (dashboard)

Files

Install: https://getpinna.dev/docs/flash/
Signed with keys/release.pub: 1170dfc308acae842fd81cbff011ecf33f2c0feb056fa2ec9998bc012fc9f706

2cb94b7cdaf394ba82552f8e8b0c4540f15aefda79b0aef9f548702f29f098cb  pinna-0.4.0-beta.2.root.img
ff9724afe55e56366a5b8e91ac6c77a6fb2596cbc9aed7bdae25dbe1ce4dde0d  pinna-boot.img
04b4f3428b08d5b74430a912c27eef6d7b35c0bde881f775a02412c9d27e5d67  manifest.json
446062460fcc05412c40c9704429d3fa60381dcdca916bab24adc6266dacbc79  manifest.json.sig
b918dff44fac83241901b4a3f5afeed81e142e45d0080c80f70cce62eb2b63a3  flash-gen2.sh

Pinna 0.4.0-beta.1

Pinna 0.4.0-beta.1 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 19 Nov 12:55

Satellites in standalone mode can form a group: ask one to pass a message to another, or to act on another by its name. You can also ask a satellite which version it runs, check for updates and, once you allow it, install one.

Before you update

This is a beta: it goes to satellites whose Updates setting is beta.

Highlights

Pass messages between satellites

Satellites on the same subnet can form a satellite group. Ask one to pass a
message, such as "tell the kitchen that dinner is ready", and the satellite in
the kitchen says "Message from Hall: dinner is ready." in its own voice. A
satellite that is busy holds up to 5 messages and plays them once it is idle;
the dashboard's Overview shows how many it holds. Set the group up on each
satellite's dashboard under Assistant > Satellite group, as
Pass messages between satellites
describes. To stop a satellite from taking messages, turn off Group
messages
, on its dashboard or in Home Assistant. If two satellites of a group
hear the wake word, both still answer: choosing one is planned.

Control another satellite by its name

In a satellite group, the brain can act on another member: "turn the kitchen
down", "set a 10 minute timer in the office" or "stop the music in the hall".
It covers the volume, the reply volume, the ring light, the media player, the
radio, timers, and stopping a request, an alarm or a message. A timer set on
another satellite rings there. To stop the others from acting on a satellite,
turn off Control from the group under Assistant on its dashboard. See
Control another satellite.

Ask the satellite to update

In standalone mode, ask "is there an update?": the satellite says which
version it runs and checks for a new one. It can also install the release it
found and restart the next time it is Idle, but only once you turn on
Install update under Assistant > Tools, which starts off. See
Ask the satellite to update.

New in Home Assistant

  • Group messages (switch): whether the satellite takes messages from the
    other satellites of its group, for example turned off by an automation at
    night.

Other changes

  • The ring's settings have their own page: Voice & sound > Ring.
  • The satellite reports its release version to Home Assistant, in its logs
    and in --version, instead of 0.1.0.
  • The log names the level, the automatic gain and the score of each wake word.

Fixed

  • Two changes close together, such as a new name and a new key from Home
    Assistant, no longer leave the older of them in the satellite's mDNS record.
  • Rescue mode and the dashboard link to the docs at getpinna.dev.

All changes

Changes since 0.3.0.

New

  • The ring settings have their own page under Voice & sound (dashboard)
  • The brain tells the version and update state and checks for updates (pinnad)
  • The brain installs an update once the owner turns the tool on (pinnad)
  • Binaries report the release version instead of 0.1.0
  • The capture loop logs each wake word's level before the gain (pinnad)
  • PeerService carries signed calls between satellites in a group (proto)
  • Group membership rules and signatures (ADR 0026) (pinnad)
  • The mDNS record can carry the satellite's group (pinna-esphome)
  • The search reads each satellite's group and counts its searches (pinnad)
  • The satellite group is saved in standalone.toml with its key in secrets.toml (pinnad)
  • The dashboard reads the satellite group and its candidates (pinnad)
  • The mDNS record carries the satellite's group from boot (pinnad)
  • A group's signature names the call it was made for (pinnad)
  • The dashboard adds and removes satellite group members through PeerService (pinnad)
  • Members exchange the group's list after each search and leave a group that ended (pinnad)
  • Group messages is a setting and a Home Assistant switch (pinnad)
  • A member says a message from another member, or holds it until it is free (pinnad)
  • The brain sends a message to a member or to all of them (pinnad)
  • The brain's context names the other members of the satellite group (pinnad)
  • A member runs a tool call from the group as its own /mcp would (pinnad)
  • The brain acts on another member's satellite by its name (pinnad)
  • The Assistant page sets up the satellite group (dashboard)
  • The Overview shows how many messages are held (dashboard)

Fixed

  • The mDNS record ends up as the latest of two changes close together (pinnad)
  • The docs links point to getpinna.dev

Files

Install: https://getpinna.dev/docs/flash/
Signed with keys/release.pub: 1170dfc308acae842fd81cbff011ecf33f2c0feb056fa2ec9998bc012fc9f706

2403ffc265d32dfda2782f0f6a9d38403f93ceb9ae0f9e51fbdac23f50c78e92  pinna-0.4.0-beta.1.root.img
d81d841fe5e436ed8fc405a7d19399b2d14235549e89602ef619aff6b5ba122a  pinna-boot.img
3a13e3a08b7e4f15c493b9d8385d199b6d3456c2430a60c7c05e7a9ff34baf15  manifest.json
891b69bf93642817383c81b2f5b932422916c4536a65d88bf75d7af33c7291e1  manifest.json.sig
b918dff44fac83241901b4a3f5afeed81e142e45d0080c80f70cce62eb2b63a3  flash-gen2.sh

Pinna 0.3.0

Choose a tag to compare

@github-actions github-actions released this 19 Nov 07:26

The first release of Pinna for the Echo Dot (2nd gen) and the Echo (2nd gen). It is a voice satellite for Home Assistant or on its own, set up from a dashboard in your browser, with signed updates that go back when they fail.

Install

Pinna needs an Echo Dot (2nd gen) or an Echo (2nd gen) that is unlocked with
Kaeru/amonet. Download all files of this release into one folder and follow
Install Pinna. Back up the
device first, as described in
What you need:
installing Pinna erases the data partition.
Recover a device explains
how to undo each step.

Highlights

A voice satellite for Home Assistant

Home Assistant adds the satellite over the ESPHome API, with its key for an
encrypted connection. The wake word runs on the satellite: up to two at a
time, chosen in Home Assistant or on the dashboard's Voice & sound page.
The ring shows Listening, Thinking and Speaking and points at the person
talking. The buttons, timers and a notification light are entities in Home
Assistant.

Standalone mode

Without Home Assistant, the satellite answers requests itself, with the speech
services and the language model or AI agent you choose: OpenAI-compatible
servers, Anthropic, Gemini and ElevenLabs. The satellite has timers, the
weather and internet radio of its own, and the language model can use your MCP
servers.
Set it up on the dashboard's Assistant page. Home Assistant switches modes
with the Voice mode select.

Set up and manage it from the dashboard

The satellite serves a dashboard on your network. You need no app, no account
and no Home Assistant. It sets the Wi-Fi, the name, the time zone, the volume
and the wake words, turns AirPlay and Bluetooth on or off, shows the logs,
restarts and resets the satellite, and switches to other satellites it finds
on your network.

Updates that go back when they fail

The satellite looks for releases on its channel: Updates is stable,
beta or off. A new release shows on the dashboard's System page and as
the Firmware update in Home Assistant, and installs when you select
Install. It goes into the second slot, and if it doesn't start, the satellite
goes back to the version before. When a start fails, the ring shows how far it
got, and rescue mode lets you recover the satellite.

In Home Assistant

  • LED ring (light)
  • Volume, Reply volume, Wake word sensitivity and
    LED brightness (number)
  • Wake word, Listening direction, AirPlay, Bluetooth audio,
    Bluetooth pairing, Wake word calibration, Wake sound and
    Notification (switch)
  • Cancel request (button)
  • Volume up button, Volume down button, Microphone mute button and
    Action button (event): press, long press and double press
  • Voice assistant, Playback, Timer and Notification (event)
  • Last wake word (sensor)
  • Media player (media player): URLs and announcements
  • Updates and Voice mode (select)
  • Firmware (update)

Also in this release

  • AirPlay and Bluetooth play music from phones and computers. The dashboard
    shows what plays and where it comes from.
  • On the Echo Dot (2nd gen), echo cancellation lowers the satellite's own music
    by 23 to 31 dB in what the microphones hear.
  • Quiet speech from across a room wakes the satellite.
  • The wake word interrupts any request and stops a ringing timer alarm.
  • Wake word calibration tunes the sensitivity with the volume buttons.
  • The satellite serves metrics for Prometheus on /metrics.

Files

Install: https://elsbrock.github.io/pinna/docs/flash/
Signed with keys/release.pub: 1170dfc308acae842fd81cbff011ecf33f2c0feb056fa2ec9998bc012fc9f706

5d3c142d1592c5b06c99b6efdcc4d1ff1535060af42fc88239aeca5d2faa5f8f  pinna-0.3.0.root.img
3247ee2c51dac5be7c5cbbdad1a48c484f31739c20a48f9d122a28a83e074c0a  pinna-boot.img
684cd59d03e732cf829060243eda8df426097ea8c599df7067888076d21c746b  manifest.json
09b6cc579cf78e0e2a467e4abb298e496582a37a988d04af3c26629831f2fe17  manifest.json.sig
b918dff44fac83241901b4a3f5afeed81e142e45d0080c80f70cce62eb2b63a3  flash-gen2.sh