Skip to content

Releases

Emaki 1.1.0

Choose a tag to compare

@Yakyman Yakyman released this 04 Nov 01:17
3743dfd

Emaki 1.1.0 adds themes: one choice in Settings changes the wallpaper, the overview background and the accent together. The Programs start screen now recommends programs, and the launcher is easier to follow with the keyboard.

Download and Secure Boot

The installation image: https://dl.emaki.sh/iso/1.1.0/emaki-1.1.0-x86_64.iso

Pick English, Español, Português, Deutsch, Français or Русский on the installer's first screen: the installer switches language at once, and the installed system uses the same language.

The image starts with Secure Boot on. On the first start, the computer has to learn Emaki's key once:

  1. The stick shows "Verification failed: (0x1A) Security Violation". Choose OK.
  2. The blue "Shim UEFI key management" screen (MokManager) counts down 10 seconds. Press any key.
  3. Choose "Enroll key from disk" → EMAKI → emaki.cer.
  4. Choose "View key" and compare its SHA-1 fingerprint with the one below. Then "Continue" → "Enroll the key(s)?" "Yes" → "Reboot". No password is needed.

If the countdown runs out, start the stick again: MokManager comes back. With Secure Boot off, nothing of this appears. A computer that already learned the key for 0.11.0, 0.12.0, 1.0.0 or 1.0.1 does not ask again: the key is the same.

The certificate emaki.cer (Emaki Secure Boot release key 2026) is attached to this page:

  • SHA-256: 0E:BC:6E:A4:01:CF:16:0C:76:32:E3:4F:54:BD:F7:B8:9E:60:BB:E3:24:DE:10:B2:E4:AE:06:27:A8:96:D5:D6
  • SHA-1 (MokManager shows this one): D5:69:0F:44:91:14:4D:FF:EC:8B:F6:77:CC:BE:06:0A:39:5F:2F:26

The enrolled key stays in the computer's key list. To remove it later, start the installed Emaki, mount the stick and run sudo mokutil --delete /path/to/mounted-usb/emaki.cer, then confirm in MokManager on the next start.

New

  • Choose a theme to change the wallpaper, overview background and accent together.
  • Browse recommendations and categories on the Programs start screen.

Changed

  • Navigate the launcher with a moving highlight and optional mode icons.

Fixed

  • Wallpaper changes reach the lock and login screens reliably.
  • Program installation, removal and updates block sleep and shutdown until finished.
  • The stars in the review dialog of Programs are no longer cut off.

Already on Emaki: update from Programs & Updates.

Known problems: the same as in 1.0.1 (https://github.com/emakish/emaki/releases/tag/v1.0.1).

Emaki 1.0.1

Choose a tag to compare

@Yakyman Yakyman released this 28 Oct 02:27
b004bf3

Emaki 1.0.1 installs on a disk that still carries a leftover ZFS label from an earlier system, with "Erase disk" and with "Install alongside Windows", and fixes three smaller problems.

Download and Secure Boot

The installation image: https://dl.emaki.sh/iso/1.0.1/emaki-1.0.1-x86_64.iso

Pick English, Español, Português, Deutsch, Français or Русский on the installer's first screen: the installer switches language at once, and the installed system uses the same language.

The image starts with Secure Boot on. On the first start, the computer has to learn Emaki's key once:

  1. The stick shows "Verification failed: (0x1A) Security Violation". Choose OK.
  2. The blue "Shim UEFI key management" screen (MokManager) counts down 10 seconds. Press any key.
  3. Choose "Enroll key from disk" → EMAKI → emaki.cer.
  4. Choose "View key" and compare its SHA-1 fingerprint with the one below. Then "Continue" → "Enroll the key(s)?" "Yes" → "Reboot". No password is needed.

If the countdown runs out, start the stick again: MokManager comes back. With Secure Boot off, nothing of this appears. A computer that already learned the key for 0.11.0, 0.12.0 or 1.0.0 does not ask again: the key is the same.

The certificate emaki.cer (Emaki Secure Boot release key 2026) is attached to this page:

  • SHA-256: 0E:BC:6E:A4:01:CF:16:0C:76:32:E3:4F:54:BD:F7:B8:9E:60:BB:E3:24:DE:10:B2:E4:AE:06:27:A8:96:D5:D6
  • SHA-1 (MokManager shows this one): D5:69:0F:44:91:14:4D:FF:EC:8B:F6:77:CC:BE:06:0A:39:5F:2F:26

The enrolled key stays in the computer's key list. To remove it later, start the installed Emaki, mount the stick and run sudo mokutil --delete /path/to/mounted-usb/emaki.cer, then confirm in MokManager on the next start.

Fixed

  • After a program from the AUR is installed, its page no longer offers to build and install it again.
  • The Emaki button in the top bar is no longer half size on screens at double scale.
  • The notice asking you to sign out after a desktop update shows its whole title.
  • A disk with a leftover ZFS label from an earlier system is no longer refused; erasing it clears the label.
  • Installing alongside Windows also works on a disk that still carries a leftover ZFS label; the label is removed without touching the existing partitions.

Already on Emaki: update from Programs & Updates.

Known problems: the same as in 1.0.0 (https://github.com/emakish/emaki/releases/tag/v1.0.0).

Emaki 1.0.0

Choose a tag to compare

@Yakyman Yakyman released this 26 Oct 19:35

Emaki 1.0.0 is the first beta, with a lighter launcher and two fixes in Settings.

Download and Secure Boot

The installation image: https://dl.emaki.sh/iso/1.0.0/emaki-1.0.0-x86_64.iso

Pick English, Español, Português, Deutsch, Français or Русский on the installer's first screen: the installer switches language at once, and the installed system uses the same language.

The image starts with Secure Boot on. On the first start, the computer has to learn Emaki's key once:

  1. The stick shows "Verification failed: (0x1A) Security Violation". Choose OK.
  2. The blue "Shim UEFI key management" screen (MokManager) counts down 10 seconds. Press any key.
  3. Choose "Enroll key from disk" → EMAKI → emaki.cer.
  4. Choose "View key" and compare its SHA-1 fingerprint with the one below. Then "Continue" → "Enroll the key(s)?" "Yes" → "Reboot". No password is needed.

If the countdown runs out, start the stick again: MokManager comes back. With Secure Boot off, nothing of this appears. A computer that already learned the key for 0.11.0 or 0.12.0 does not ask again: the key is the same.

The certificate emaki.cer (Emaki Secure Boot release key 2026) is attached to this page:

  • SHA-256: 0E:BC:6E:A4:01:CF:16:0C:76:32:E3:4F:54:BD:F7:B8:9E:60:BB:E3:24:DE:10:B2:E4:AE:06:27:A8:96:D5:D6
  • SHA-1 (MokManager shows this one): D5:69:0F:44:91:14:4D:FF:EC:8B:F6:77:CC:BE:06:0A:39:5F:2F:26

The enrolled key stays in the computer's key list. To remove it later, start the installed Emaki, mount the stick and run sudo mokutil --delete /path/to/mounted-usb/emaki.cer, then confirm in MokManager on the next start.

New

  • Emaki 1.0 is the first beta: ready for everyday use, and every update can still be undone from the boot menu.

Fixed

  • Settings can be found in the launcher by its name in your language.
  • The account description in Settings is no longer cut short.

Changed

  • The shell's helpers end with it, and the update notice no longer checks the system every 5 seconds.
  • The launcher keeps nothing loaded while it is closed and opens where you left it.

Already on Emaki: update from Programs & Updates.

Known problems: the same as in 0.12.0 (https://github.com/emakish/emaki/releases/tag/v0.12.0), except that the launcher now finds Settings by its name in every language.

Emaki 0.12.0

Choose a tag to compare

@Yakyman Yakyman released this 24 Oct 02:49

Emaki 0.12.0 brings German, French and Russian, a command menu and emoji, text and QR codes from the screen, developer kits and websites as apps, and a new installation image.

Download and Secure Boot

The installation image: https://dl.emaki.sh/iso/0.12.0/emaki-0.12.0-x86_64.iso

Pick English, Español, Português, Deutsch, Français or Русский on the installer's first screen: the installer switches language at once, and the installed system uses the same language.

The image starts with Secure Boot on. On the first start, the computer has to learn Emaki's key once:

  1. The stick shows "Verification failed: (0x1A) Security Violation". Choose OK.
  2. The blue "Shim UEFI key management" screen (MokManager) counts down 10 seconds. Press any key.
  3. Choose "Enroll key from disk" → EMAKI → emaki.cer.
  4. Choose "View key" and compare its SHA-1 fingerprint with the one below. Then "Continue" → "Enroll the key(s)?" "Yes" → "Reboot". No password is needed.

If the countdown runs out, start the stick again: MokManager comes back. With Secure Boot off, nothing of this appears. A computer that already learned the key for 0.11.0 does not ask again: the key is the same.

The certificate emaki.cer (Emaki Secure Boot release key 2026) is attached to this page:

  • SHA-256: 0E:BC:6E:A4:01:CF:16:0C:76:32:E3:4F:54:BD:F7:B8:9E:60:BB:E3:24:DE:10:B2:E4:AE:06:27:A8:96:D5:D6
  • SHA-1 (MokManager shows this one): D5:69:0F:44:91:14:4D:FF:EC:8B:F6:77:CC:BE:06:0A:39:5F:2F:26

The enrolled key stays in the computer's key list. To remove it later, start the installed Emaki, mount the stick and run sudo mokutil --delete /path/to/mounted-usb/emaki.cer, then confirm in MokManager on the next start.

New

  • Emaki speaks German, French and Russian across the desktop, Programs & Updates, the installer and Notes; choose your language in Settings › Region & Time.
  • Super+K opens a command menu in the launcher (settings pages, appearance, Night Light, restart and more), and Super+; finds an emoji by name and copies it.
  • Capture can copy text and read QR codes from a selected area of the screen.
  • Programs & Updates installs developer kits (Python, Node.js, Rust, Go, Docker) and adds websites as apps in Firefox.
  • Settings › Updates & Recovery can reset Emaki's own settings to their defaults, keeping your files and app settings, with Undo.

Fixed

  • Numbers, sizes and dates follow your language, and translated buttons no longer cut their labels.
  • Every launcher mode tab stays reachable; the tab strip fades at an edge where more tabs lie beyond.
  • Spanish and Portuguese wording corrected throughout.

Already on Emaki: update from Programs & Updates.

Known problems: the same as in 0.11.0 (https://github.com/emakish/emaki/releases/tag/v0.11.0), and in languages other than English:

  • The app launcher finds Settings only by its English name, "Settings".
  • In the installer, most keyboard layouts are shown only by a short code such as "al"; searching by the English name still finds them.
  • The boot menu of the installed system stays in English.

Emaki 0.11.0

Choose a tag to compare

@Yakyman Yakyman released this 21 Oct 23:04

Emaki 0.11.0 brings Spanish and Portuguese, clocks and a What's new window to the late alpha, and a new installation image.

Download and Secure Boot

The installation image: https://dl.emaki.sh/iso/0.11.0/emaki-0.11.0-x86_64.iso

Pick English, Español or Português on the installer's first screen: the installer switches language at once, and the installed system uses the same language.

The image starts with Secure Boot on. On the first start, the computer has to learn Emaki's key once:

  1. The stick shows "Verification failed: (0x1A) Security Violation". Choose OK.
  2. The blue "Shim UEFI key management" screen (MokManager) counts down 10 seconds. Press any key.
  3. Choose "Enroll key from disk" → EMAKI → emaki.cer.
  4. Choose "View key" and compare its SHA-1 fingerprint with the one below. Then "Continue" → "Enroll the key(s)?" "Yes" → "Reboot". No password is needed.

If the countdown runs out, start the stick again: MokManager comes back. With Secure Boot off, nothing of this appears.

The certificate emaki.cer (Emaki Secure Boot release key 2026) is attached to this page:

  • SHA-256: 0E:BC:6E:A4:01:CF:16:0C:76:32:E3:4F:54:BD:F7:B8:9E:60:BB:E3:24:DE:10:B2:E4:AE:06:27:A8:96:D5:D6
  • SHA-1 (MokManager shows this one): D5:69:0F:44:91:14:4D:FF:EC:8B:F6:77:CC:BE:06:0A:39:5F:2F:26

The enrolled key stays in the computer's key list. To remove it later, start the installed Emaki, mount the stick and run sudo mokutil --delete /path/to/mounted-usb/emaki.cer, then confirm in MokManager on the next start.

New

  • Emaki speaks Latin American Spanish and Brazilian Portuguese across the desktop, Programs & Updates, the installer and Notes; choose your language in Settings › Region & Time.
  • After an update, a What's new window shows what changed.
  • Clocks in the clock shade: a timer with a Pomodoro preset, a stopwatch, alarms and world clocks.
  • Emaki tells you when updates are ready; the notice opens Programs & Updates.

Fixed

  • Programs & Updates shows small download sizes instead of 0.0 MB.
  • The password card no longer flashes an error while it closes.
  • Install buttons stay available while the catalogue refreshes.
  • A manual installation that keeps the Windows startup partition as its own can install updates again.

Changed

  • Discover is no longer installed with the Rich set; Programs & Updates installs and updates your apps.
  • The 0.11.0 install image installs Emaki 0.11.0 directly, with the installer in English, Spanish and Portuguese.

Already on Emaki: update from Programs & Updates.

Known problems: the same as in 0.9.0 (https://github.com/emakish/emaki/releases/tag/v0.9.0), except that Dolphin and other KDE programs follow your theme and accent since 0.10.0.

Emaki 0.10.0

Choose a tag to compare

@Yakyman Yakyman released this 20 Oct 20:41

Emaki 0.10.0 brings notes and calendar events to the late alpha.

New

  • Emaki Notes, a notes app with checklists. Every note is a Markdown file in your Notes folder.
  • Notes in the clock shade, next to the calendar and notifications.
  • Pinned notes appear as a small notes island in the top bar that opens into your pinned notes, where you can tick and add tasks.
  • Calendar events with reminders in the clock shade, kept on your computer as iCalendar files.

Fixed

  • The close button of a notification in the clock shade is visible and easy to reach.
  • The launcher's settings button is a small glass drop with a crisp gear.
  • The calendar always opens on the current month.
  • KDE applications such as Dolphin follow the light or dark theme and your accent colour.
  • Programs & Updates no longer freezes with a large catalogue, keeps the catalogue when you reopen it and refreshes it quietly.
  • The login screen shows your current wallpaper, never an older photo.

Changed

  • The desktop uses less memory at idle.

Update from Programs & Updates. New installs use the 0.9.0 image (https://dl.emaki.sh/iso/0.9.0/emaki-0.9.0-x86_64.iso, Secure Boot steps on the 0.9.0 release page) and get 0.10.0 with their first update.

Known problems: the same as in 0.9.0 (https://github.com/emakish/emaki/releases/tag/v0.9.0), except that Dolphin and other KDE programs now follow your theme and accent.

Emaki 0.9.1

Choose a tag to compare

@Yakyman Yakyman released this 19 Oct 04:32

Emaki 0.9.1 is a small update to the 0.9 late alpha.

  • Moving saved passwords to the new wallet no longer stops at a key without an application name.
  • The launcher shows the Emaki pixel mark.
  • The lock and login screens use your current wallpaper.
  • Dolphin uses the Emaki colours.

Update from Programs & Updates. New installs use the 0.9.0 image (https://dl.emaki.sh/iso/0.9.0/emaki-0.9.0-x86_64.iso, Secure Boot steps on the 0.9.0 release page) and get 0.9.1 with their first update.

Known problems: the same as in 0.9.0, see https://github.com/emakish/emaki/releases/tag/v0.9.0.

Emaki 0.9.0

Choose a tag to compare

@Yakyman Yakyman released this 17 Oct 03:20

Emaki 0.9.0 is a late alpha. Secure Boot and the full check of the whole system are done. The next versions get Emaki ready for people: a website, the source code next to the image, and the small things that are left.

Download and Secure Boot

The installation image: https://dl.emaki.sh/iso/0.9.0/emaki-0.9.0-x86_64.iso

The image starts with Secure Boot on. On the first start, the computer has to learn Emaki's key once:

  1. The stick shows "Verification failed: (0x1A) Security Violation". Choose OK.
  2. The blue "Shim UEFI key management" screen (MokManager) counts down 10 seconds. Press any key.
  3. Choose "Enroll key from disk" → EMAKI → emaki.cer.
  4. Choose "View key" and compare its SHA-1 fingerprint with the one below. Then "Continue" → "Enroll the key(s)?" "Yes" → "Reboot". No password is needed.

If the countdown runs out, start the stick again: MokManager comes back. With Secure Boot off, nothing of this appears.

The certificate emaki.cer (Emaki Secure Boot release key 2026) is attached to this page:

  • SHA-256: 0E:BC:6E:A4:01:CF:16:0C:76:32:E3:4F:54:BD:F7:B8:9E:60:BB:E3:24:DE:10:B2:E4:AE:06:27:A8:96:D5:D6
  • SHA-1 (MokManager shows this one): D5:69:0F:44:91:14:4D:FF:EC:8B:F6:77:CC:BE:06:0A:39:5F:2F:26

The enrolled key stays in the computer's key list. To remove it later, start the installed Emaki, mount the stick and run sudo mokutil --delete /path/to/mounted-usb/emaki.cer, then confirm in MokManager on the next start.

New

  • New installations can use Secure Boot after you enrol the installation's signing key.
  • On installations set up for Secure Boot, Settings lets you sign startup files again or request key enrolment again.
  • Secure Boot updates keep the previous startup copy until the new copy completes a trial startup.
  • New installations beside Windows give Emaki its own startup partition.
  • The installation USB includes a command to repair Emaki's startup files and firmware entries without writing to Windows' startup partition.
  • Choose your time zone on a world map that follows time-zone boundaries.
  • Create and delete partitions inside the installer's Manual page, then review the changes before pressing Install.
  • Learn the desktop and its shortcuts in the five-page Welcome to Emaki tour, which you can reopen from the launcher.
  • Hold Alt+Tab to choose an open window from pictures and titles, or tap it to return to the previous window.
  • Read the time-zone map's sources and licence inside the installer, even without an internet connection.
  • The About page in Settings shows the licence terms and where the full licence texts are installed.

Fixed

  • Pinned dock icons keep working after the list of installed applications refreshes.
  • Long notifications wrap their text, and Secure Boot notices stay until you act on them.
  • Recent items appear in the launcher again, and a failed sleep lock shows a notice.
  • Retry a failed read in Settings without closing the window.
  • Settings shows the current power mode, and the Do Not Disturb switch takes effect immediately even during a schedule.
  • Reopen a recovery offer from Settings after choosing Not now.
  • More controls work from the keyboard, and secondary text is easier to read.
  • Notification history and managed settings files are saved with access restricted to your account.
  • Community-package lookups run only with your consent.
  • Package diagnostics remove private details before saving error messages.
  • Updates stop before changing packages if available space cannot be checked or is insufficient.
  • A frozen lock screen can be replaced while the session stays locked.
  • Startup repair and rollback can clear an interrupted package change's lock after a restart when they can verify that it is no longer in use.
  • The installer keeps your reviewed disk plan when another connection checks the disks.
  • Package updates run directly with pacman also stop before changing anything when the disk clearly lacks space.
  • The installer checks the disk's sector size before it writes a new partition table.

Changed

  • Light is the default theme with Rose as the default accent, while saved appearance choices stay in effect.
  • Your accent also colours the terminal, power menu and backup lock screen, and Qt applications with their default colour settings use it when reopened (KDE programs such as Dolphin not yet, see Known problems).
  • Choose a person by name and picture on the login screen and see their selected appearance before entering a password.
  • Startup goes from the boot menu to the logo without routine loading messages, while errors remain visible.
  • The default dock pins are Firefox, Kitty, Dolphin and Programs & Updates, while your chosen pins stay yours.
  • The terminal uses Iosevka Nerd Font Mono and a translucent background by default.
  • New accounts use zsh with command suggestions, highlighting and completion by default.
  • Default shortcuts add Super+Enter for the terminal, Super+E for files, Super+Q to close a window and Super+Alt+R to start or stop recording.
  • Move a column to another monitor with Super+Ctrl+Shift and an arrow key, or adjust its width with Super+Minus and Super+Equal.
  • Use Super+Shift+F to switch a window between floating and tiled, and Super+Left Bracket or Super+Right Bracket to move it into or out of a neighbouring column.
  • Installer, update and recovery messages use plainer words and clearer instructions.
  • Included software ships with more complete licence and copyright notices.

Removed

  • GParted is replaced by the installer's built-in partition editor.

Known problems

Emaki is in alpha. These are the limits we know about in 0.9.0.

Hardware we could not test

  • Secure Boot beside Windows with BitLocker has not been tried on a real PC. We checked everything within our means: Secure Boot on virtual machines with both current sets of Microsoft certificates, installation beside a Windows startup partition that stays untouched, and the startup repair command. A real computer with Windows, BitLocker and Secure Boot was not part of these tests. If you install beside Windows, keep your BitLocker recovery key somewhere outside the computer, as you would for any change to how a computer starts.
  • NVIDIA graphics with Secure Boot has not been tested on real hardware.

Secure Boot

  • Secure Boot is set up only by a new installation. The installer prepares it when Secure Boot is on in the firmware during installation. Updating an older installation to 0.9.0 does not add Secure Boot, and an installation made with Secure Boot off stays as it is. Keep Secure Boot off on those installations; a new installation is the way to use it.
  • The snapshot menu under Secure Boot shows only snapshots it can start. Snapshots whose system files are not signed by this installation's key are left out.
  • After firmware entries are lost, the computer may start Windows first. Choose Emaki in your computer's own boot menu, or start the installation USB and run sudo emaki-boot-repair.

Installation

  • After a Manual installation, other systems start from the firmware boot menu. The Manual page keeps the other systems' partitions, but Emaki's boot menu does not list them. Start them from your computer's own boot menu instead. Installing next to Windows lists Windows in Emaki's menu as before.
  • The time-zone map leaves out some small regions. Search for them in the list next to the map. The map shows January and July offsets, not every seasonal rule.

Desktop

  • Some password prompts started from Settings close by themselves. This happens with Settings › Storage › Inspect, Settings › Updates & Recovery › Channel, and the Secure Boot buttons in Settings › Privacy: the prompt disappears before you can type, and nothing is changed. Run the same command in a terminal instead:

    • Storage details: pkexec emaki-settings-storage status --json
    • Update channel: pkexec emaki-update-channel set testing --json (or set stable)
    • Secure Boot, new one-time password for key enrolment: sudo emaki-secureboot enroll
    • Secure Boot, sign startup files again: sudo emaki-secureboot sign
  • Accent colours do not reach every application. GTK applications keep their own colours. Qt applications pick up a new accent when reopened, and personal Qt colour choices are kept.

  • Dolphin and other KDE programs do not use the accent yet. They show their standard light colours, as in 0.8.1. This will be fixed in an update.

  • Programs & Updates waits a long time on a new installation made without internet. It needs the first full system update; run sudo pacman -Syu once the computer is online.

  • The desktop panel's own diagnostic messages do not reach the system journal. This was already the case in 0.8.1.

  • Please do not use hibernation yet. The installer does not set it up, as in earlier versions.

Source code

  • Source code of the image's third-party packages. Next to the 0.9.0 image, the download folder has SOURCES-ISO.txt. It links the source archive of every Emaki package in the image, with its SHA-256, and the Emaki repository. For each third-party package whose licence asks for its source, it names the exact package and version and links to that package's build recipe at Arch Linux, which in turn points to the upstream sources. Emaki's own copies of those third-party sources are not uploaded yet; they will be added to the same folder. The release page on GitHub carries these notes, the Secure Boot certificate emaki.cer and GitHub's source archives of the Emaki repository.

Emaki 0.8.1

Choose a tag to compare

@Yakyman Yakyman released this 14 Oct 23:27

Emaki 0.8.1 polishes the shell: a dark theme and accent colours, the whole shell by keyboard, one material everywhere, and a list of fixes.

New

  • Appearance, in Settings: Light, Dark or Automatic, which switches at the hours you set, and eight accent colours. The accent recolours the whole shell and Programs & Updates. Anyone who has not chosen yet starts in Dark with orange.
  • One material across the shell. The launcher, the panels that open from the bar, notifications, the password prompt, Welcome and the shortcut sheet now share the material of Settings.
  • The whole shell works with the arrow keys. From the recent programs, Up goes to Search Everything and Right walks the tabs; Escape steps back to where you came from. Keyboard focus looks the same as hover.
  • The password prompt grows out of the clock bubble instead of opening as a separate window.
  • The panel and the dock appear like a Mac's menu bar and Dock: Always, On Desktop Only, In Full Screen Only or Never. With Never and On Desktop Only, full-screen windows start below the panel.
  • Emaki's logo at startup. On an encrypted installation the disk password is asked on the same screen.
  • Your own picture on the lock and login screens: choose it in Settings → Users.
  • Snapshot guard joins the From Emaki shelf.
  • Programs & Updates fits in a third of the screen.

Tested on a MacBook Pro (Retina, 13-inch, Early 2015): an update from the testing channel.

Fixed

  • Programs installed from Programs & Updates, Flathub programs included, appear in the app launcher at once, with their icons.
  • The screen sharing indicator no longer stays on when nothing is shared, and it names the program that shares.
  • The glass no longer flickers for a moment when a bubble or a panel opens.
  • Opening a program no longer stutters.
  • The wallpaper chooser in Settings opens again.
  • The launcher's Apps tab shows its name the first time the launcher opens.
  • Report a problem removes every line that names a password, token or key, in any form.

Limits

  • Report a problem now removes a whole line, or a few lines, around anything that names a password, token or key. A report can lose a little more context than before; read the preview before you send it.
  • Secure Boot must still be switched off.

Emaki 0.8.0

Choose a tag to compare

@Yakyman Yakyman released this 14 Oct 03:17

Emaki 0.8.0 finishes Programs & Updates, adds Report a problem, and installs alongside Windows.

New

  • A new Programs & Updates window with four tabs: Browse, AUR, Installed and Updates, each with its own search. Browse opens on a start screen: Picked by Emaki, Popular and New and updated, plus categories; after a minimal installation it also offers the programs a full installation would have added. The catalog works right after installation, before the first update.
  • Ratings and reviews. Programs show stars and reviews from the open ratings service that GNOME Software and KDE Discover also use, and you can write your own. AUR programs show their votes.
  • Installed lists every program, including Firefox and Dolphin. Anything can be removed except the parts Emaki needs to work, which are marked Part of Emaki.
  • The AUR, in its own tab of Programs & Updates. It opens only after a plain warning: anyone can publish there and nobody checks it, neither Emaki nor Arch. It starts with the AUR's most popular programs, in the AUR's own order. A program page shows its votes, popularity, last update, out-of-date flag, maintainer and first publication. The password prompt names the AUR as the source.
  • Undo this install. A program installed from Programs & Updates can be taken back with one button. Exactly what its install added goes, and your files stay. If the install changed packages that were already there, Undo returns the system to the snapshot made before the install, after a restart.
  • From Emaki, a shelf with Emaki's own optional packages, each installed with one button. In 0.8.0 it has the sudo key, and NVIDIA support on computers with an NVIDIA graphics card.
  • What's new in Emaki. When an Emaki update is waiting, the Updates tab shows what is new in it, from its release notes, with a link to the full page. You will first see it with the release after 0.8.0.
  • Report a problem, in Settings → About and the app launcher. Emaki also offers it when the panel stops or an update or install fails. You write what happened; Emaki adds its version, update channel, kernel, a hardware summary and recent logs, with personal data removed. You see exactly what will be sent. Nothing leaves the computer until you choose Send, which opens a filled-in issue on GitHub.
  • Install alongside Windows. The installer keeps Windows and gives part of its free space to Emaki, at least 32 GiB. Windows appears in Emaki's boot menu; choosing it restarts the computer straight into Windows. Both share the computer's startup partition: Emaki never formats it and writes only its own folder there, and only while Windows is fully shut down.

Tested on a MacBook Pro (Retina, 13-inch, Early 2015) with Windows 10: an installation alongside Windows from the USB stick and an update from the testing channel; Emaki and Windows both start from Emaki's boot menu.

Fixed

  • A new installation image replaces the 0.5.0 one: the Wi-Fi network you join during installation is kept on the installed system.
  • Some messages, including the password prompt for installing a program, showed a "[PLACEHOLDER]" mark. They now show their final text.

Limits

  • Nobody checks AUR programs. A snapshot before each install lets you undo it, but it does not protect against stolen passwords or files. What you install from the AUR is your decision.
  • AUR installs need system snapshots. On a computer installed with ext4 you can browse the AUR, but not install from it.
  • AUR programs are built on your computer, as a separate user that cannot see your home folder. They are not part of Update all: build each update from the program's page.
  • Undo works for installs made from Programs & Updates from 0.8.0 on. NVIDIA support from the shelf also needs system snapshots, and it has no Undo, because removing graphics drivers can leave a black screen. To go back, restore the snapshot made before its install, in Updates.
  • Personal data is removed from a report automatically. Read the preview before you choose Send. You need a GitHub account to post the report. A report too long for the issue form is copied to the clipboard instead, for you to paste there.
  • The installer will not shrink Windows that is asleep (hibernation or Fast Startup), encrypted with BitLocker, or on a dynamic disk. It says what to change in Windows first.
  • Next to Windows, Emaki installs, updates or removes system packages only while Windows is fully shut down. If Windows is asleep, or BitLocker was turned on later, Emaki stops before changing anything and says why.
  • If you encrypt Emaki next to Windows, only Emaki is encrypted. Its disk password is asked before the boot menu, also when you want to start Windows.
  • Secure Boot must still be switched off. Secure Boot support is planned as the next release.
  • Reading ratings and reviews sends the program's name to the ratings service. Writing a review sends your review, the name you choose to show and a random identifier, never your account or computer name.
  • A program installed from Programs & Updates may not appear in the app launcher right away.

Not in this release

  • Snapshot guard joins the From Emaki shelf in a later update.
  • Reporting a problem without a GitHub account comes later.
  • Installing alongside another Linux is not offered.