Repository navigation
BenchPod Desktop 0.1.2
Everything one engineer does at the bench now works in the desktop app, with no account: the agent, and bench controls beside it to drive the pod by hand.
New: bench controls
- Console: the board's UART as a terminal. The agent's console reads and writes show there too.
- Captures: logic, analog, or both on one time axis, with a trigger. Drag to zoom; decode UART, I2C or SPI as a table and on the waveform. The agent's captures draw there too.
- Generator: DC levels, sine, square and sawtooth, segmented signals, fault injection into a waveform, and the control loop, on the 3.3 V, 5 V, ±12 V or 4-20 mA output.
- Waveform library on your computer: save an analog capture or import a CSV, then play it back.
- Flash: flash your board's firmware from a file (.elf, .hex, .bin), then see its boot log. OpenOCD must be installed.
- Wiring: which board signal is on which LA channel, the power rail, the I/O voltage, the UART baud and the flash target. Kept on your computer; every control and the agent read it.
- Power: switch the rails and read the current live.
- Pod firmware (in Settings): update the pod's own firmware to the latest release, or from release files when you have no internet. The app bundles the
benchpodCLI for this.
The controls use the same safety settings as the agent: they ask before changing power, firmware or outputs, the output limits apply (now to replays too), and every change goes to the action log.
New: first start without an account
The app opens on Find your pod: it looks on USB, then on your network, and asks your board's I/O voltage. Nothing is registered. Picking a model is optional; the bench controls work without the agent.
Also
- macOS: the app declares its local network use, so it can reach the pod over your network and the pod's USB network adapter.
- Needs embeddedci-mcp 2.13.10 or later for the capture view; the app picks it up on its next start.
Install instructions: https://github.com/embeddedci-com/benchpod-desktop#install
SHA256SUMS lists a checksum for every file here: sha256sum -c SHA256SUMS --ignore-missing.