Skip to content

Releases

Carlink 3.30: the OCBM 2.7.0 update, for a sooner start from a powered-off adapter

Choose a tag to compare

@github-actions github-actions released this 22 Nov 04:44
  • Offers the adapter update to OCBM 2.7.0 in Settings › Adapter and about, from OCBM 1.0.1 or later, and installs 2.7.0 on a stock adapter from the connecting screen (Convert to OCBM).
  • 2.7.0 is ready sooner after the adapter gets power, the start a car sees when it has cut the adapter's USB power while parked: the adapter loads its two radios side by side and earlier in its start, and calls the phone about 2 s sooner. On the bench the first CarPlay frame came 13.8 to 16.9 s after power-on when the iPhone answered the adapter's first call.
  • Nothing else changes in Carlink since 3.25.

What's Changed

  • [325] Version 3.25: the picture sooner, with OCBM 2.6.5 pinned by @enigy in #10

Full Changelog: v325...v330

Carlink 3.25: the picture sooner, with the OCBM 2.6.5 update

Choose a tag to compare

@github-actions github-actions released this 17 Nov 17:55
  • The CarPlay picture shows as soon as the iPhone's first frame is drawn. The loading screen used to wait for the connection to be marked as streaming, about 2 s longer when Carlink had just been opened.
  • Carlink gets its video decoder ready as the display comes on, from the last session's stream settings, so the iPhone's first frame is drawn within about 0.1 s of arriving. If a decoder built ahead draws nothing, Carlink builds a fresh one, and never leaves the loading screen up over a picture that is ready.
  • When the display comes on before the adapter is listed on USB, Carlink connects as the adapter attaches, without waiting for its next check.
  • Night mode reaches CarPlay with its first picture, not a moment later.
  • Offers the adapter update to OCBM 2.6.5 in Settings › Adapter and about, from OCBM 1.0.1 or later, and installs 2.6.5 on a stock adapter from the connecting screen (Convert to OCBM). 2.6.5 connects sooner: it keeps Bluetooth ready but invisible between sessions, starts its Wi-Fi and its CarPlay receiver earlier, and reads the authentication chip's certificate once. On the bench a wake reached the picture in 5.2 to 6.4 s with the iPhone in use, where 2.6.1 with Carlink 3.21 took 8.2 to 9.4 s.
  • Connect time's records gain two times for each connect: when video arrived and when the decoder was ready.
  • The bench hooks in this version's commits are in debug builds only, never in this release.

What's Changed

  • [321] Version 3.21: connect times, with OCBM 2.6.1 pinned by @enigy in #9

Full Changelog: v321...v325

Carlink 3.21: connect times, and the OCBM 2.6.1 measuring update

Choose a tag to compare

@github-actions github-actions released this 17 Nov 01:15
  • Settings › Adapter and about › Connect time: how long CarPlay takes from the display coming on to the picture, over your last 20 wakes: the time half of them were within, and the time 9 in 10 were within. It needs five wakes first, and counts a wake only when Carlink's screen was in front as the display came on.
  • To work that out, Carlink keeps the times of the last 200 connects on the head unit: when each began, what started it, how long each step took and how it ended. It names no phone, never leaves the head unit by itself, and comes out with Save Logs. PRIVACY.md has the row.
  • Offers the adapter update to OCBM 2.6.1 in Settings › Adapter and about, from OCBM 1.0.1 or later, and installs 2.6.1 on a stock adapter from the connecting screen (Convert to OCBM). 2.6.1 changes nothing in how the adapter connects: it adds the time of each connect step to its log, and Carlink keeps that line with the connect while Record drive logs is on.
  • The bench hooks in this version's commits are in debug builds only, never in this release.

What's Changed

  • [320] Version 3.20: fuel discounts and quick phone changes, with OCBM 2.6.0 pinned by @enigy in #6
  • Update README.md by @enigy in #7
  • Connect ledger: how long each connect took, kept on the head unit by @enigy in #8

Full Changelog: v320...v321

Carlink 3.20: fuel discounts, and quick phone changes with OCBM 2.6.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 01:40
  • Offers the adapter update to OCBM 2.6.0 in Settings › Adapter and about, from OCBM 1.0.1 or later, and installs 2.6.0 on a stock adapter from the connecting screen (Convert to OCBM). With 2.6.0 a change of phone takes about 5 s from the phone joining the adapter's Wi-Fi to the CarPlay picture, against 40-90 s before, and a switch from the Phones page about 9 s from the tap.
  • Settings › Vehicle › Fuel discounts, with Nearby stations on: enter the cents off per gallon you get at a listed brand's stations, or at another station by its name as the Fuel card shows it. Where the Fuel card has prices (Price source: Google Places, with your own key; US prices only), it then ranks those stations by the price you pay, with the posted price under it. Listed brands: QuikTrip, Kroger (its banners' fuel centers too), Shell, Exxon and Mobil, BP and Amoco, Chevron and Texaco, Circle K, Murphy USA and RaceTrac.
  • A program covers regular to premium, and diesel and E85 too unless you turn "Diesel and E85 too" off. One store of a brand, typed with its number or street, can be a program of its own. Costco and Sam's Club aren't listed: their posted price is already the member price. Discounts are set while parked. Each program keeps only its brand or the station name you gave it, its amount and the Diesel and E85 too switch, never a membership number.
  • Phones: the rank arrows show a press, as the pane controls do. A pane control or arrow keeps its full touch area while pressed, so a press near its edge no longer slips off it.
  • The loading screen fades out over about a second as CarPlay starts, instead of cutting away.
  • Logs: a display flicker during a wake no longer leaves a wrong wake line.
  • The bench hooks in this version's commits are in debug builds only, never in this release.

What's Changed

  • Bench hooks (debug only), wake fixes, the loading fade by @enigy in #4
  • Fuel discounts; the rank arrows show a press by @enigy in #5

Full Changelog: v310...v320

Carlink 3.10: faster wireless connects, with OCBM 2.5.0

Choose a tag to compare

@github-actions github-actions released this 15 Nov 00:17
  • Offers the adapter update to OCBM 2.5.0, from OCBM 1.0.1 or later, and installs 2.5.0 on a stock adapter. With 2.5.0 a cold connect takes about 12 s to the CarPlay picture, against about 22 s on 2.0.0.
  • When the head unit's display wakes, Carlink connects at once while the adapter is still listed. It keeps the 2.5 s USB settle only for an adapter that isn't listed, or an open that failed. The open at once waits 3 s for the adapter's first reply instead of 20 s.
  • A display going off and on during a connect no longer leaves Carlink stuck in Connecting, nor ends a session that had already come up. Close app and a handover stay closed.
  • A connect within 6 s of Carlink's own stop (the display-off wait ending a session, Close app, a reset) waits for the adapter to finish tearing that session down.
  • Reset connection, Close app and a handover finish even when you leave the settings page during them. Reset connection now says about 20 seconds without CarPlay.
  • The Phones page explains the call order when two or more phones are listed.
  • Settings › Vehicle › Engine type: no "From the car" option. The car's own type shows selected (Gasoline, the adapter's default, until the car reports one) until the driver picks one, and a pick is remembered.
  • The Tide water moves while driving too.
  • Logs: the adapter's boot preload state, a [startup] wake: line timing each wake, and a [startup] carlink: line at a cold start.

What's Changed

  • Carlink 3.10: faster wireless connects, with OCBM 2.5.0 by @enigy in #3

New Contributors

  • @enigy made their first contribution in #3

Full Changelog: v302...v310

Carlink 3.02

Choose a tag to compare

@github-actions github-actions released this 12 Nov 21:12

Full Changelog: v301...v302

Carlink 3.01

Choose a tag to compare

@github-actions github-actions released this 12 Nov 20:34

Full Changelog: v300...v301

Carlink 3.00

Choose a tag to compare

@github-actions github-actions released this 12 Nov 17:44

Full Changelog: v225...v300

Carlink 2.25

Choose a tag to compare

@github-actions github-actions released this 11 Nov 22:06

Full Changelog: v224...v225

Carlink 2.24

Choose a tag to compare

@github-actions github-actions released this 10 Nov 18:45

USB Bridge 1.0.9 (attached as carlink_bridge-1.0.9.apk, SHA-256 3b9bbd18...4c6ee) updates itself.
From now on, when a Carlink release pins a newer bridge, Settings > Adapter and about > USB bridge
offers Update while parked: the bridge downloads it from this project's GitHub release, checks its
size and SHA-256, and installs it, with the head unit's confirm when Android asks for one. The move
from 1.0.8 to 1.0.9 is still by hand, from a USB drive, and Settings shows the steps. A head unit
with no page to let the bridge install apps gets the USB drive steps instead of a dead-end Allow.

OCBM 1.0.6 pinned: the update package (v1.0.6) and the installer image (installer-1.0.6), both on
enigy/ocbm f2bf538. When Carlink's link comes back within seconds under a live CarPlay session, as
after the bridge restarts for its update, the adapter hands the video keys again, so video and the
phone come back in about 6 s. The update needs about 2861 KB, so an adapter still in its trial
finishes its install first.

Also the cleanup check's follow-ups: no Android Auto left in the media item, the phone label or
navigation.

Full Changelog: v223...v224