Terminal SW

The High Speed Direct Connect FW for the COMiX loads and saves files from a PC by using terminal SW. We have mainly tested this with TeraTerm others might work as well as long as there is an option for binary send and receive.

To get the highest speed possible make sure that the line and character delays in the PC terminal SW are all set to 0 ms, in TeraTerm:

Note that 1KB should load and save in about 1 second when using 9600 baud, e.g., 'happiehap.comx' should load within 20 seconds.

Default baud rate is set to 9600 baud for use with a COMiX running on 2.8 MHz.

For other CPU or baud rates first use the BAUD command as described in Auto Baud.