Repository navigation
Releases
BatteryHub v1.1 (Rust)
BatteryHub v1.1 (Rust)
An ultra-lightweight Rust implementation of BatteryHub for Windows, a fork of krisgfx9/Wireless-Device-Battery-Monitor. All credit for the original idea, look and device protocols goes to the original project.
Download
| File | |
|---|---|
BatteryHub-Taskbar-Setup-v1.1.exe |
Setup: Install / Update / Uninstall |
SHA256SUMS.txt |
Checksum |
Already installed? Run the new setup and choose [2] Update. Your settings and autostart choice are kept. From v1.1 on, you can also update from the program itself.
New
- Check for updates (right-click menu): asks GitHub for the latest release and shows "No new updates" or "A new update is available: v1.1 -> v1.x - update now?". On Yes the setup is downloaded, verified against the release's SHA-256 checksum and started; it updates and restarts BatteryHub.
- About 0.2 MB of RAM when idle (Task Manager "Memory" column; was about 1.1 MB): memory that is only needed for a moment is handed back to Windows after every read and Bluetooth check, and settings are cached instead of read from the registry every second.
- Setup: when it is done (install, update, uninstall or exit), it thanks you, links to the project for a star and closes itself after 5 seconds. On an error it stays open.
Fixes since v1.0 (v1.0.1 / v1.0.1.1)
- Unplugged receiver / cable: its device disappears at once instead of showing "asleep".
- Bluetooth devices (AirPods...) disappear / appear right when they disconnect / connect; AirPods only while connected to this PC.
- Headsets switched on or off on a 2.4 GHz dongle, and mice waking up behind a receiver, show within ~10 s.
- No duplicate, garbled strip after an Explorer restart (seen on the small Windows 10 taskbar of ExplorerPatcher).
- Safe fallback to notification-area icons on a vertical taskbar or an unknown Explorer layout; unit tests and CI.
Windows may show a SmartScreen warning because the file is not code-signed: click More info -> Run anyway.
BatteryHub v1.0.1.1 (Rust)
BatteryHub v1.0.1.1 (Rust)
An ultra-lightweight Rust implementation of BatteryHub for Windows, a fork of krisgfx9/Wireless-Device-Battery-Monitor. All credit for the original idea, look and device protocols goes to the original project.
Download
| File | |
|---|---|
BatteryHub-Taskbar-Setup-v1.0.1.1.exe |
Setup: Install / Update / Uninstall |
SHA256SUMS.txt |
Checksum |
Already installed? Run the new setup and choose [2] Update. Your settings and autostart choice are kept.
Fixes
- Garbled strip after an Explorer restart: a second, orphaned strip could be left on the taskbar, overlapping the real one and the notification area. Now there is always exactly one strip, and any stray strip window is removed within a second.
- No notification-area icons flashing up for a moment when the taskbar is not ready yet at sign-in.
- The setup now also reads a four-part version (e.g. 1.0.1.1) from the installed program.
Changes since v1.0 (from v1.0.1)
- Unplugged receiver / cable: its device disappears at once instead of showing "asleep".
- Bluetooth devices disappear / appear right when they disconnect / connect. AirPods are shown only while connected to this PC.
- Headsets switched on or off on a 2.4 GHz dongle, and mice waking up behind a receiver, show within ~10 s.
- A device change during a running read is no longer lost.
- Strip re-rendered after full screen and DPI / theme changes; safe fallback to notification-area icons on a vertical taskbar or an unknown Explorer layout.
- Unit tests for recorded device reports, and CI.
RAM as Task Manager shows it ("Memory"): 0.8 MB vs 4.2 MB for the original C++ app on the same PC (bench/RESULTS.md).
Windows may show a SmartScreen warning because the file is not code-signed: click More info → Run anyway.
BatteryHub v1.0.1 (Rust)
BatteryHub v1.0.1 (Rust)
An ultra-lightweight Rust implementation of BatteryHub for Windows, a fork of krisgfx9/Wireless-Device-Battery-Monitor. All credit for the original idea, look and device protocols goes to the original project.
Download
| File | |
|---|---|
BatteryHub-Taskbar-Setup-v1.0.1.exe |
Setup: Install / Update / Uninstall |
SHA256SUMS.txt |
Checksum |
Already on v1.0? Run the new setup and choose [2] Update. Your warning levels, refresh options and autostart choice are kept.
Fixes
- Unplugging a receiver or cable now removes its device at once, instead of showing it as "asleep". "Asleep" is used only when the receiver is still plugged in and the device sleeps.
- Bluetooth devices disappear right after they disconnect, and appear right after they connect. Bluetooth connection changes are now detected (checked every 4 s), and HID devices register for Windows' arrival / removal notifications.
- A device change during a running read is no longer lost, and every read notices added / removed HID devices on its own.
- Headsets switched on or off on a 2.4 GHz dongle, and mice waking up behind a receiver, show within ~10 s (those receivers are checked more often), instead of at the next minute.
- AirPods are shown only while connected to this PC, not while they are just nearby or connected to a phone.
- Strip drawing after leaving full screen, DPI / theme changes and Explorer restarts: the strip is re-rendered when the taskbar changes and recreated reliably after Explorer restarts.
New
- Safe fallback: on a vertical taskbar or an unknown Explorer layout, BatteryHub shows one notification-area icon per device (level drawn in the icon, same tooltip and menu) and returns to the strip when it can.
- Tests and CI: unit tests decode recorded reports (SteelSeries, DualSense / DualShock 4, AirPods, Fast Pair, Logitech) without the hardware; GitHub Actions builds and tests every push.
Footprint
RAM as Task Manager shows it ("Memory"): 0.8 MB vs 4.2 MB for the original C++ app on the same PC. Details are in bench/RESULTS.md.
Windows may show a SmartScreen warning because the file is not code-signed: click More info → Run anyway.
BatteryHub v1.0 (Rust)
BatteryHub v1.0 (Rust)
First release of this fork of krisgfx9/Wireless-Device-Battery-Monitor, rewritten in Rust 🦀. All credit for the original idea, look and device protocols goes to the original project.
Download
| File | |
|---|---|
BatteryHub-Taskbar-Setup-v1.0.exe |
Setup: Install / Update / Uninstall |
SHA256SUMS.txt |
Checksum |
Run the setup and choose Install, Update or Uninstall. Before showing the options, it checks what is already installed and shows where every file is. No administrator rights are needed. It does not touch the original C++ BatteryHub.
What's included
- Taskbar strip with an icon and percentage per device. Hover a device for its name and charge state.
- Right click to:
- set each device's red warning level (50 to 5%);
- refresh devices or battery levels;
- choose the refresh interval (1 / 5 / 10 / 30 min / 1 h);
- turn on refresh when a device connects or disconnects;
- exit.
- Green ⚡ while charging, blue ⚡ at 100%, red percentage at or below the warning level.
- Desktop and Start menu shortcuts, optional autostart.
- Drivers: Logitech HID++, SteelSeries, Razer, DualShock 4 / DualSense, AirPods / Beats (BLE), Bluetooth (incl. Fast Pair), generic HID, Xbox.
- Light on resources: compared with the original 1.1.0 on the same PC, 368 KB vs 1,958 KB file, 2.4 MB vs 29.4 MB working set, 3.2 MB vs 5.6 MB private memory, ~0.02 s vs ~0.64 s CPU per minute. See
bench/RESULTS.md. - Tooltip and right-click menu follow the taskbar theme (dark / light).
Windows may show a SmartScreen warning because the file is not code-signed: click More info → Run anyway.