Repository navigation
v0.9.0 — first public release (beta)
Pre-releaseFirst public release (beta) of the Linux driver and control panel for the
PHASE X64 USB audio interface (TerraTec / TerraSoniq / Musonik, Ploytec chipset).
What it is
snd-usb-phasex64- ALSA kernel driver, built with DKMSphasex64-panel- control panel (Python/Tk) for routing, capture sources,
phono RIAA, meters, MIDI activity and PipeWire's buffer sizephasex64-wireplumber- optional WirePlumber "Pro Audio" profile for
JACK applications
What works
- Playback 4 channels, capture 6 channels (In 1/2, In 3/4, and 5/6 as a
bit-exact digital copy of Out 1/2) - Phono inputs with RIAA equalisation in the driver
- Live codec and routing changes while a stream is running
- MIDI in and out
- PipeWire and JACK (via
pipewire-jack), bit-exact through PipeWire at
100 % sink/source volume; buffer sizes down to 64 samples - 48 kHz in daily use; 44.1, 88.2 and 96 kHz tested once on hardware, see
the README
Tested environment: Arch Linux, kernel 7.2.x, PipeWire 1.6.x,
WirePlumber 0.5.x, REAPER 7.82 via pipewire-jack. Tested on one unit, on
one machine - hardware reports from other systems are very welcome (there's
an issue template for that).
Known limitations: see
Known limitations
in the README (MIDI only while an audio stream runs, the Aux/Phono side
switches must match the capture source, S/PDIF audio not yet characterised,
and more).
Install: see the
Quick start
in the README (Arch Linux / Manjaro; packages for other distributions follow
later).
Not affiliated with or endorsed by TerraTec, TerraSoniq, Musonik or Ploytec;
an experimental kernel module, provided without warranty (GPL-2.0-only).
Built by loopback-coding: AI-assisted, human-directed, hardware-verified.
Every change went out, came back through real hardware, and was measured
before it counted.