Skip to content

Releases

1.0.0

Choose a tag to compare

@github-actions github-actions released this 18 Nov 22:44
b38f83b

Read the blygs you follow, answer them, and publish your own, without leaving your notes. Blyg connects Obsidian to a Blygger Studio you own, on your desktop, iPad and iPhone.

What's new since 0.11

The reader (experimental). "Open reader" shows the posts of the blygs your Studio follows as a feed of cards: who wrote it, how long ago, how long it takes to read, what is unread, what answers you.

  • Sort by newest, oldest or reading time; filter by blyg, length, unread, or replies to your posts.
  • Posts open as text on their own calm reading surface, with quotes shown as bars and their source named.
  • Previous and Next at the foot of a post. Hold Next to mark the post read and go on.
  • Reply to what you just read: select a passage and Reply starts a new thread that quotes exactly that passage.
  • Replies you can see, mentions of your items (with Dismiss), and read marks that follow you between devices.
  • It opens at once from a saved list and then catches up, so a long list does not slow Obsidian's start.

A panel organised by what you want to do. The note's next step comes first, as one button (Review publication, Review update, Review draft). The writing buttons are grouped under "Start writing", and the rest is folded under "Work on this note" and "Details". A fragment shows a live character counter.

Pictures in your notes. Images you embed from your vault are uploaded with the item, and the publish window now shows them as readers will see them, scaled to fit the window.

Clearer setup. "Connect your Studio" lists the steps in order, and the token step says which permissions to tick.

Good to know

  • You need your own Blygger Studio, version 0.51.0 or newer. Every change is tested against Studio 0.51.0 and the newest release (0.62.0 at this release).
  • Needs Obsidian 1.13.0 or newer. It works on mobile.
  • Your token lives only in Obsidian's keychain. For read marks in the reader and for dismissing mentions, create a token with every permission ticked; an existing token keeps working for publishing.
  • The reader loads the newest 200 posts of the blygs you follow. Loading older posts is planned.
  • No settings migration is needed.

Rollback: install the previous release (0.11.0) from its GitHub page.

0.11.0

Choose a tag to compare

@github-actions github-actions released this 12 Nov 22:40
363b803

You can now put images in your Studio notes. Nothing else changes, and your settings carry over unchanged.

Added

  • Images in Studio notes. A note can embed an image from your vault, ![[photo.png]], ![[photo.png|a red door]] (the text after the bar is the image's description) or ![a red door](photo.png), and publishing uploads it to your Studio with the item. The window shows how many images go up and how big they are. PNG, JPEG, GIF, WebP and SVG up to 5 MB are accepted, and the image has to be inside the folder of the note's route (or below it); an image that is missing, outside that folder, too big or of another kind (an iPhone HEIC photo, for example) stops the publish before anything is sent, with the line it is on. Publishing the same note again uploads nothing it does not have to, and the panel tells you about a problem image before you tap Publish. Images work in Studio routes only; the older GitHub-hosted routes still refuse them.

0.10.1

Choose a tag to compare

@github-actions github-actions released this 11 Nov 12:27
80decbb

The quote picker is easier to use when you paste something. Nothing else changes, and your settings carry over unchanged.

Added

  • Paste an item's id. In "Insert quote", "Insert link" and when you start a reply, you can paste the id the reader's "Copy id" gives you (the whole [[id | "…"]] text, or the id alone) instead of the item's address. It finds your own items and items of the blygs your Studio is subscribed to. For any other blyg, paste the item's address ("Copy url"); the picker says so.

Changed

  • A clear "Looking up…" while an address or id is looked up. A line with a spinner shows above the list, and the list is greyed and cannot be chosen from until the answer is in, so it is plain that you are meant to wait a moment.

0.10.0

Choose a tag to compare

@florianlohse florianlohse released this 07 Nov 12:50

One new command, for quoting a web page. Nothing changes in how the plugin publishes or reads, and your settings carry over unchanged.

Added

  • Insert web quote (plain Markdown). Quote a passage from any web page, a Substack post for example: paste the passage and the page's address into a small form and get an ordinary Markdown quote with an italic source link under it. The link's text can be an alias you type; without one the address is shown shortened. Tracking parameters (utm_… and the like, and Substack's share parameters) are taken out of the address. Your text is kept if the app is closed while you go to the browser to copy the address. It is not a blyg item: nothing is checked, fetched or sent, and it works in any note.
  • Settings → Web quote holds a template for the whole block, with {quote}, {link}, {alias} and {url}, so you decide where the quote, the link and any blank line go. By default the source is an italic line directly under the quote, with no blank line between.

0.9.1

Choose a tag to compare

@florianlohse florianlohse released this 06 Nov 13:58

A small maintenance release: nothing changes in how the plugin publishes or reads.

Added

  • Issue forms for bug reports and ideas, and a security policy (SECURITY.md), in the repository, so a report arrives with the details that matter (versions, device, Studio).

Changed

  • The README says that pull requests are not accepted for now; ideas and fixes go into an issue.
  • Development builds (the test flavour, Blyg (dev), numbered x.y.z-dev.N) connect only to test Studios (an address ending in .workers.dev, or localhost), so they can never
    publish to a real Studio, and the settings say so on top. A development build does nothing while the real plugin is enabled (it says so; only one can run at a time),
    and a fresh development install starts with the test folder Studio test/ instead of blyg/. None of this changes the plugin you install from here.

0.9.0

Choose a tag to compare

@florianlohse florianlohse released this 06 Nov 07:51

The first public release (a beta). Install it through BRAT from florianlohse/blyg-obsidian (see the README). Release candidates are published first as
pre-releases 0.9.0-rc.N; the text of this section is the release notes of both.

Publish to your own Blygger Studio from Obsidian, on desktop and mobile.

Added

  • Fragments and threads from folders you choose, with a preview of what will change before every send; failures leave a draft and your note untouched.
  • Quotes (whole or a passage) and replies as stubs; find an item by pasting its address.
  • Drafts-only folders, pull the Studio's copy into a note, import items written in the Studio, withdraw, delete a draft, hoppers.
  • Studio-only mode: no GitHub account, repository or token needed.

Changed

  • Speaks Studio API contract 5: needs Studio 0.51.0 or newer (tested with Studio 0.51.0 to 0.53.0, API contract 5.2 to 5.4); older Studios are refused before anything is sent. If you ran 0.7.x, update the Studio first.
  • Settings: Advanced → Also publish to a GitHub-hosted site is now a switch. Switching it on shows the GitHub settings right below it, in the
    same box; switching it off hides them again. Nothing you typed is deleted. If you already use a GitHub-hosted site, the switch starts on.
  • A thread that is a reply now says so in plain words: the panel shows Stub: a reply to …, and so does the send window.
  • Studio: repost this note, Studio: list reposted items and the panel's Repost to Studio button are only offered when you also
    use a GitHub-hosted site (they move an old GitHub-site item into the Studio). Everyone else no longer sees them.
  • A Studio whose API is a newer minor version than the one this plugin was tested with is no longer reported as a warning: "Check connection"
    shows a muted note, and the panel shows at most one small muted line. Newer minor versions only add things and are accepted; a newer major
    version is still refused.
  • The plugin id is now blyg (was obsidian-blyg). Existing early users are taken over once from the old install.

Fixed

  • The panel's Created and Updated rows for a published item now show the dates the Studio reports (they showed "—").

Security

  • A trailing dot no longer lets localhost., x.local. or x.internal. pass the private-network refusal when reading other blygs.
  • A Studio token that ended up inside an error text is now removed from the log.

Needs: Obsidian 1.13.0+, a Studio token with owner:read owner:draft owner:publish (30-day lifetime, kept in Obsidian's keychain).

Known gaps: no images, no mentions list, no reader stream, tokens renewed by hand every 30 days.
Planned: mentions, images, OAuth sign-in, community-plugin listing after a beta period (1.0.0).

0.9.0-rc.2 (release candidate)

Pre-release

Choose a tag to compare

@florianlohse florianlohse released this 06 Nov 06:12

The first public release (a beta). Install it through BRAT from florianlohse/blyg-obsidian (see the README). Release candidates are published first as
pre-releases 0.9.0-rc.N; the text of this section is the release notes of both.

Publish to your own Blygger Studio from Obsidian, on desktop and mobile.

Added

  • Fragments and threads from folders you choose, with a preview of what will change before every send; failures leave a draft and your note untouched.
  • Quotes (whole or a passage) and replies as stubs; find an item by pasting its address.
  • Drafts-only folders, pull the Studio's copy into a note, import items written in the Studio, withdraw, delete a draft, hoppers.
  • Studio-only mode: no GitHub account, repository or token needed.

Changed

  • Speaks Studio API contract 5: needs Studio 0.51.0 or newer (tested with Studio 0.51.0 to 0.53.0, API contract 5.2 to 5.4); older Studios are refused before anything is sent. If you ran 0.7.x, update the Studio first.
  • Settings: Advanced → Also publish to a GitHub-hosted site is now a switch. Switching it on shows the GitHub settings right below it, in the
    same box; switching it off hides them again. Nothing you typed is deleted. If you already use a GitHub-hosted site, the switch starts on.
  • A thread that is a reply now says so in plain words: the panel shows Stub: a reply to …, and so does the send window.
  • Studio: repost this note, Studio: list reposted items and the panel's Repost to Studio button are only offered when you also
    use a GitHub-hosted site (they move an old GitHub-site item into the Studio). Everyone else no longer sees them.
  • A Studio whose API is a newer minor version than the one this plugin was tested with is no longer reported as a warning: "Check connection"
    shows a muted note, and the panel shows at most one small muted line. Newer minor versions only add things and are accepted; a newer major
    version is still refused.
  • The plugin id is now blyg (was obsidian-blyg). Existing early users are taken over once from the old install.

Fixed

  • The panel's Created and Updated rows for a published item now show the dates the Studio reports (they showed "—").

Security

  • A trailing dot no longer lets localhost., x.local. or x.internal. pass the private-network refusal when reading other blygs.
  • A Studio token that ended up inside an error text is now removed from the log.

Needs: Obsidian 1.13.0+, a Studio token with owner:read owner:draft owner:publish (30-day lifetime, kept in Obsidian's keychain).

Known gaps: no images, no mentions list, no reader stream, tokens renewed by hand every 30 days.
Planned: mentions, images, OAuth sign-in, community-plugin listing after a beta period (1.0.0).

0.9.0-rc.1 (release candidate)

Pre-release

Choose a tag to compare

@florianlohse florianlohse released this 04 Nov 12:29

The first public release (a beta). Install it through BRAT from florianlohse/blyg-obsidian (see the README). Release candidates are published first as
pre-releases 0.9.0-rc.N; the text of this section is the release notes of both.

Publish to your own Blygger Studio from Obsidian, on desktop and mobile.

Added

  • Fragments and threads from folders you choose, with a preview of what will change before every send; failures leave a draft and your note untouched.
  • Quotes (whole or a passage) and replies as stubs; find an item by pasting its address.
  • Drafts-only folders, pull the Studio's copy into a note, import items written in the Studio, withdraw, delete a draft, hoppers.
  • Studio-only mode: no GitHub account, repository or token needed.

Changed

  • Speaks Studio API contract 5: needs Studio 0.51.0 or newer; older Studios are refused before anything is sent. If you ran 0.7.x, update the Studio first.
  • The plugin id is now blyg (was obsidian-blyg). Existing early users are taken over once from the old install.

Security

  • A trailing dot no longer lets localhost., x.local. or x.internal. pass the private-network refusal when reading other blygs.
  • A Studio token that ended up inside an error text is now removed from the log.

Needs: Obsidian 1.13.0+, a Studio token with owner:read owner:draft owner:publish (30-day lifetime, kept in Obsidian's keychain).

Known gaps: no images, no mentions list, no reader stream, tokens renewed by hand every 30 days.
Planned: mentions, images, OAuth sign-in, community-plugin listing after a beta period (1.0.0).