Skip to content

Releases

pesto-v0.11.0

Choose a tag to compare

@github-actions github-actions released this 03 Nov 21:32
cb8c5ae

Added

  • PAR2 sets for files with non-ASCII names now carry a Unicode Filename
    (UniFileN) packet next to the File Description, as ParPar does. This
    includes the season-wide set built by --season.
  • threads and simd can now be set under [posting] in the config file, as
    well as with --threads and --simd (#218).
  • --slice-size article (par2_slice_size = "article") uses one PAR2 slice
    per article, so the par2 percentage repairs that share of lost articles
    however they are scattered. --par2-effort (par2_effort) scales the CPU
    budget of automatic slicing. --slice-size can also be set in the config
    file now, as par2_slice_size (#217).

Changed

  • The automatic PAR2 thread count is capped at 16 and never exceeds the CPUs
    the process may use (CPU affinity and cgroup quotas). It used to start one
    thread per physical core of the host: 64 on a shared 64-core seedbox, where
    they encoded no faster than 16 but used twice the CPU. An explicit
    --threads is not capped. The PAR2 progress event and the memory reserve
    now use the same count, including an explicit --threads (#218).
  • Automatic PAR2 slices are now a whole multiple of the article size, so a
    lost article costs exactly one recovery block instead of often two.
    Releases up to about 2.4 GiB get one slice per article: with 10 % PAR2 they
    survive 10 % of scattered lost articles, up from 4 to 8 %, and smaller ones
    encode faster. Larger releases keep about 2000 slices and the same CPU cost,
    and survive slightly more scattered loss than before. Sets of mostly
    sub-article files keep the old geometry. Recovery data stays at the par2
    percentage. See docs/par2-geometry.md (#217).
  • --resume discards state recorded by an older version when PAR2 is
    enabled, since this version builds different PAR2 volumes for the same
    config. RunFingerprint::par2_file_id_order and PAR2_FILE_ID_ORDER are
    renamed par2_layout and PAR2_LAYOUT. RunFingerprint gained
    par2_effort and no longer implements Eq (#217).
  • File and folder names with non-ASCII characters (accents, ç, CJK, …) are
    now posted unchanged as UTF-8 in the Subject, yEnc name=, .nzb and PAR2
    File Description, matching nyuu, ngPost and ParPar. They were previously
    rejected unless the upload used --compress. No Unicode normalization is
    applied. NZBGet decodes PAR2 names as Latin-1 and can restore them garbled;
    SABnzbd restores them correctly (#209).
  • A compressed upload whose source name is non-ASCII now keeps that name for
    the archive (Lição.7z) instead of falling back to archive.7z. The
    pesto::compress::portable_archive_stem function was removed (#209).

Fixed

  • Under full, article and full-shared, an obfuscated recovery volume's
    yEnc name keeps its .volNNN+NNN.par2 suffix instead of only .par2.
    NZBGet otherwise renamed every volume to +01 and counted one recovery
    block per volume, so a repair needing more blocks than there were volumes
    failed without fetching them. A --check repost under article also keeps
    the suffix now.
  • Multi-file PAR2 sets (per-run and --season) now list and order files by
    File ID as the PAR2 spec, par2cmdline and ParPar do, so they match ParPar
    byte for byte. --resume discards state recorded by an older version when
    PAR2 is enabled, instead of reusing PAR2 volumes built with the old order
    (#212).
  • The retry command printed for --resume used --par2-slice-size,
    --par2-slice-count and --par2-recovery-count, which do not exist. It now
    prints --slice-size, --slice-count and --recovery-count, and
    --par2-effort when it is not the default.
  • An invalid --slice-size value is now rejected. It used to be silently
    ignored, leaving the slice size automatic.

Full history: crates/pesto/CHANGELOG.md.

Also published to crates.io and documented on docs.rs.

parmesan-v0.6.0

Choose a tag to compare

@github-actions github-actions released this 03 Nov 21:24
cb8c5ae

See crates/parmesan/CHANGELOG.md for what changed in this release.

Also published to crates.io and documented on docs.rs.

pesto-v0.10.6

Choose a tag to compare

@github-actions github-actions released this 27 Oct 20:51
5ff66be

Fixed

  • --season no longer gets OOM-killed under a cgroup memory limit in the
    season-wide PAR2 step. The step now sizes its passes against the headroom
    left after what the process already holds (resident set at that point,
    after returning free allocator pages to the OS on glibc), instead of
    against the whole ceiling (#205).
  • Under a cgroup, host-RAM or --memory-limit ceiling, the automatic PAR2
    budget now leaves room for the encoder's flush queue, including its 256 MiB
    floor, as the RLIMIT_AS path already did. This can add passes on tightly
    limited hosts. An explicit --par2-memory-limit is validated as before
    (#205).

Full history: crates/pesto/CHANGELOG.md.

Also published to crates.io and documented on docs.rs.

penne-v0.7.0

Choose a tag to compare

@github-actions github-actions released this 27 Oct 03:15
1c5f657

See crates/penne/CHANGELOG.md for what changed in this release.

pesto-v0.10.5

Choose a tag to compare

@github-actions github-actions released this 20 Oct 02:28
284f46c

Added

  • Linux ARM64 release artifact pesto-linux-aarch64, built natively against
    Debian 12 / glibc 2.36 and validated with the full package test suite (#199).
  • Repeatable --exclude <GLOB> and --no-exclude, with root-level TOML
    exclude and no_exclude keys. Exclusions prune discovered directories,
    warn for skipped entries, and reject an empty upload. Explicit file arguments
    bypass exclusions. CLI custom patterns replace the config's custom list.
  • Root-level TOML ext extension allowlist, overridden by CLI --ext.
    Extension matching is case-insensitive; an empty list allows all extensions.
    The resolved allowlist also applies to library uploads used by UpaPasta.

Fixed

  • The Linux installer and --update select assets by CPU architecture as well
    as libc, and reject unpublished combinations instead of downloading x86_64
    binaries on ARM64 or other unsupported platforms (#199).
  • Flush recovery-volume writes before reopening or posting PAR2 files, including
    season-wide sets, to prevent silently truncated recovery data (#200).
  • Split --each, --season and --watch uploads keep path exclusion globs
    relative to the original discovery root instead of each child directory.
  • Season-wide PAR2 uploads bypass the source extension allowlist so a filter
    such as ext = ["mkv"] cannot discard generated .par2 volumes.

Changed

  • Directory discovery now skips common macOS, Windows, Synology and FUSE
    metadata by default (#194). Other hidden files, including .courseid, remain
    eligible. --no-exclude restores discovery without exclusions while leaving
    any extension allowlist active.

Full history: crates/pesto/CHANGELOG.md.

Also published to crates.io and documented on docs.rs.

parmesan-v0.5.8

Choose a tag to compare

@github-actions github-actions released this 20 Oct 02:17
284f46c

See crates/parmesan/CHANGELOG.md for what changed in this release.

Also published to crates.io and documented on docs.rs.

penne-v0.6.0

Choose a tag to compare

@github-actions github-actions released this 06 Oct 03:51
9c5c345

See crates/penne/CHANGELOG.md for what changed in this release.

parmesan-v0.5.7

Choose a tag to compare

@github-actions github-actions released this 16 Sep 20:47

See crates/parmesan/CHANGELOG.md for what changed in this release.

Also published to crates.io and documented on docs.rs.

pesto-v0.10.4

Choose a tag to compare

@github-actions github-actions released this 12 Sep 16:04
08a4b48

Fixed

  • --season/--each kept the media extension in PESTO_NAME. Batch entries used the raw filename (Show.S01E01.mkv), while a single-file upload already stripped known extensions. Indexer pre-hooks that exact-match a Newznab search then queried ….mkv and missed the existing release (stored without the extension). --season/--each/--watch now share the same release_label helper as the single-file path.

Added

  • Docker image and Compose example for pesto --watch as a long-lived
    daemon (Dockerfile, docker/compose.yaml). Each pesto-v* tag also
    publishes ghcr.io/franzopl/pesto:<semver> from the linux-gnu release
    artifact. See #185.

Changed

  • The pesto-linux-x86_64 GitHub Release artifact is built on Ubuntu 22.04
    (glibc 2.35) so it runs on Debian 12 and inside the Docker image. Musl
    and Windows artifacts are unchanged.

Full history: crates/pesto/CHANGELOG.md.

Also published to crates.io and documented on docs.rs.

pesto-v0.10.3

Choose a tag to compare

@github-actions github-actions released this 06 Sep 02:36

Changed

  • Verbose output now reports the effective PAR2 scratch directory when it is
    created, summarizes the files materialised there, and confirms its removal.
    Scratch creation/write errors include the affected path, while cleanup
    failures are warned instead of being silently discarded. Documentation now
    clarifies that recovery is computed in RAM before the short-lived directory
    appears. Fixes #183.

Full history: crates/pesto/CHANGELOG.md.

Also published to crates.io and documented on docs.rs.