Repository navigation
Replies: 28 comments
#100 - [GEP-28] Unmanaged infra restore without re-run of init flowHow to categorize this topic? /area disaster-recovery /label teamsize/medium /lifecycle frozen What is the topic about?: Currently the restore of the control plane is done via a re-run of the init flow - similar in principle to how CPM is done. But this requires a lot of workarounds and introduces its set of issues regarding webhooks and re-establishing connectivity. Alternative approach is to just restore the etcd data, kubelet and GNA on the control plane node without the whole run of the init flow. tldr: The goal is to restore the state of the CP node instead of deleting CP pods and re-running the flow. Already tested it up to the point where we use the bootstrap etcd and it seems to work. The remaining part is to check if applying the OSC from the etcd stored data is sufficient for the etcd takeover and for a complete restore. |
#99 - Check compatibility between Extensions and GardenHow to categorize this topic? /area robustness /label teamsize/small /lifecycle frozen What is the topic about?: With the growing Gardener ecosystem, especially extensions not maintained by the core Gardener team (e.g., gardener-extension-acl, gardener-extension-provider-gdch), we face increasing challenges in ensuring compatibility between Gardener and these extensions. Currently, compatibility tracking is manual and error-prone, relying on README documentation that is often outdated or incomplete. The idea is to add a programatic way for extensions to declare their version compatibility for Gardener to verify at deploy time. I'd like to use the hackathon to discuss the proposal with other stakeholders and implement a POC to validate technical questions. |
#98 - How-to guides for deploying Gardener on IronCore, metal-stack, and STACKITHow to categorize this topic? /area documentation /label teamsize/small /lifecycle frozen What is the topic about? Gardener has a lot of conceptual documentation for beginners (like the current Getting Started section and How to Set Up a Gardener Landscape page). However, there is little documentation on how to actually get started. In particular, there are no step-by-step guides for specific use cases, such as setting up Gardener on IronCore, metal-stack, or STACKIT. Let's create some onboarding guides together and save Gardener newcomers from their struggles. Corresponding issue and discussion: gardener/documentation#722 |
#97 - Make core gardener resources compatible with
|
#95 - Reconcile
|
#94 - Get rid of the hack folderHow to categorize this topic? /area dev-productivity /label teamsize/small /lifecycle frozen What is the topic about?: The hack folder with logic written mostly in bash scripts, is as the name suggests, not a permanent solution and we should search for a proper one. |
#91 - Canary rollouts for extensions/gardenletsHow to categorize this topic? /area ops-productivity scalability /label teamsize/medium /lifecycle frozen What is the topic about?: Revisit https://gardener.cloud/community/hackathons/2022-09/#canary-rollout With Gardener environments growing to high shoot counts, canary rollouts might help gain more confidence in rollouts and detect issues before they affect all clusters. |
#90 - Load balancing between
|
#89 - [GEP-28] Don't require a provider extension for unmanaged infrastructureHow to categorize this topic? /area usability /label teamsize/small /label fast-track /lifecycle frozen What is the topic about?: From gardener/gardener#2906:
|
#88 - [GEP-28] Bootstrap a self-hosted shoot on cloud infrastructureHow to categorize this topic? /area usability /label teamsize/small /lifecycle frozen What is the topic about?: So far, we have worked on GEP-28 almost exclusively based in the local setup. |
#87 - Generate
|
#86 - [GEP-28] Deletion of Self-Hosted Shoot Cluster with Managed InfrastructureHow to categorize this topic? /area ops-productivity /label teamsize/small /lifecycle frozen What is the topic about?: While self-hosted shoot clusters with unmanaged infrastructure can be cleaned up with The goal of this topic is to make it more convenient to clean up a self-hosted shoot cluster with managed infrastructure. |
#85 - IPv6 and Dualstack support for gardener-extension-provider-metalstackHow to categorize this topic? /area networking /label teamsize/medium /lifecycle frozen What is the topic about?: The metal-stack IaaS supports IPv4/IPv6 and Dualstack since more than two years now, but the gardener integration does not. Implement IPv6 and Dualstack support in the gardener-extension-provider-metal and dependants. |
#84 - Make gardener small again!How to categorize this topic? /area cost /label teamsize/small /lifecycle frozen What is the topic about?:
The goal would be to document some findings, and maybe have a plan on some improvements to contribute upstream for optimizing resource usage or making some more aspects of gardener optional. |
#83 - [GEP-28] Check if the end-to-end tests suites can run in gind/gink environemntHow to categorize this topic? /area dev-productivity /label teamsize/small /lifecycle frozen What is the topic about?: As a follow-up to #8, we could try to run one of the end-to-end test scenarios, e.g. |
#82 - [GEP-28] Add support for ACL extension in self-hosted shoot cluster setupHow to categorize this topic? /area control-plane /label teamsize/small /lifecycle frozen What is the topic about?: The ACL extension can be used for hosted shoot clusters to restrict the IP ranges allowed to communicate with the cluster's API server. In self-hosted shoot clusters, the API server is exposed via |
#80 - Support opt-in to preview auto-updatesHow to categorize this topic? /area usability /label teamsize/small /label lifecycle/frozen What is the topic about?: Implement the proposal in gardener/gardener#13667 |
#67 - Native Routing in the local Dev SetupHow to categorize this topic? /area networking /label teamsize/small What is the topic about?: Currently, we use overlay networking in the local development setup. Now, that we soon have a It would allow us to test certain scenarios in the local development setup, which we can currently only test in real shoot clusters, e.g. switch between native routing and overlay networking. |
#66 - VPN Connectivity between Garden Runtime Cluster and SeedsHow to categorize this topic? /area networking /label teamsize/small What is the topic about?: Depending on the landscape setup, components running in the Garden runtime cluster may not be able to initiate connections to Seed clusters. However, it might be good to have connectivity from the Garden runtime cluster to the Seed clusters, e.g. for showing content in the Gardener Dashboard. The VPN connection between shoot control plane and shoot data plane is similar. It is established from the data plane to the control plane and used in the other direction. This is similar to what would be possible between Garden runtime cluster and Seed cluster, i.e. all Seed clusters are able to communicate with the Garden runtime cluster. |
#57 - Implementing MachineType Successors in GardenerHow to categorize this topic? /area ops-productivity What is the topic about?: # Current Date: 2026-04-15
apiVersion: core.gardener.cloud/v1beta1
kind: CloudProfile
spec:
machineTypes:
- name: m5.large
cpu: 2
gpu: 0
memory: 8Gi
lifecycle:
- classification: preview
# Implicitly starts if no startTime
- classification: supported
startTime: "2025-01-01T00:00:00Z"
- classification: deprecated
startTime: "2026-05-01T00:00:00Z"
- classification: expired
startTime: "2026-07-01T00:00:00Z"
successor: m6i.large
migrationPolicy: ForceUpgrade # Options: ForceUpgrade, Manual, BlockScalingThe
|
#51 - Support
|
#48 - Persist Logs of e2e TestsHow to categorize this topic? /area dev-productivity /label teamsize/medium What is the topic about?: Gardener e2e tests export the logs of running pods/machines before exiting βΒ both on success and failure βΒ so that they can be viewed/downloaded in the artifacts browser (gcsweb). |
#47 - Add support for virtual Garden to ACL ExtensionHow to categorize this topic? /area networking /label teamsize/small What is the topic about?: With gardener/gardener#14420 it is possible to handle the client IP address for the virtual garden cluster. Hence, it might be interesting to add support for IP allowlisting to the ACL extension for this scenario, i.e. IP allowlisting of the virtual garden cluster. |
#43 - Switching CNIsHow to categorize this topic? /area networking What is the topic about?: With both CNIs in native routing mode, a router controller from your cloud controller manager running and some migration code in gardener, it should be possible to achieve such a switch without downtime. There are a lot of blogs and docs about doing Cilium migrations with overlay networking, but I think it's the most easiest to focus on native routing as it should be the easiest.
Current PoC for switching CNIs on a local kind cluster: https://github.com/hown3d/poc-switch-cni Special notes for your reviewer: |
#31 - Dev: Define AGENTS/SKILLS.md files/templates suitable for the Gardener orgHow to categorize this topic? What is the topic about?: |
#11 - Dual-Stack Seed APIHow to categorize this topic? /area networking /label teamsize/small What is the topic about?: As one of the last steps missing for full Gardener Dual-Stack support, the Seed API needs to be extended. |
#10 - Reduce number of Istio Ingress GatewaysHow to categorize this topic? /area cost /label teamsize/small What is the topic about?: In a standard multi-zonal seed cluster, there is one multi-zonal istio ingress gateway and one per availability zone. The multi-zonal istio ingress gateway could be replaced by usage of all single-zone istio ingress gateways. This could lead to higher resource usage, reduced costs and a less complicated setup. |
#102 - Introduce Machine Maintenance phase affecting health-check/rolling-update/in-place updateHow to categorize this topic? /area control-plane /label teamsize/medium /label fast-track What is the topic about?: Clusters sometimes need planned maintenance of individual machines/nodes (e.g., hardware repairs, firmware updates, host reboots). Today MCM treats the resulting NotReady node as a failure: machine health checks fire, MachineDeployment status goes unhealthy, and rollouts/updates get blocked, even though the downtime is planned and expected. Introduce a Machine Maintenance phase affecting health-check, rolling-update, and in-place update (gardener/machine-controller-manager#1112). MCM should recognize the node.machine.sapcloud.io/maintenance=true label on a Machine or Node object, propagate it from Node β Machine (reusing the existing node-condition/preservation machinery), and adjust behavior: New Machine phase: machines under maintenance (whose Node goes NotReady) transition to a new Maintenance phase instead of Failed. Also relevant: recent Kubernetes developments around node lifecycle conditions (see k8s v1.37 node lifecycle conditions blog). |
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
π Hackathon Topic Voting Results
π Ranked Topics
kstatusshootwhen referenced resources are changedapplyconfigurationsfor all gardener API typesvirtual-garden-kube-apiserverandgardener-apiserverGardenin extension-auditAll reactions