Skip to content

OpenASPI 0.1.0 Alpha 4

Pre-release
Pre-release

Choose a tag to compare

@geosone geosone released this 03 Nov 12:20
· 52 commits to main since this release

Fourth alpha of the OpenASPI DOS driver suite. New: SyQuest cartridge drives and hardware write protection.

Downloads

  • openaspi-*-us-disk1.img / openaspi-*-gr-disk1.img: English / German OpenASPI installation disk.
  • openaspi-*-us.zip / openaspi-*-gr.zip: the corresponding complete package for installation from a directory.
  • exfat-0.4-us-disk1.img / exfat-0.4-gr-disk1.img and the matching ZIPs: the exFAT package on its own (EXFAT.SYS, EXFMT, EXCHK), unchanged since Alpha 3.
  • SHA256SUMS and BUILDINFO.txt: checksums, source revision and build dependencies.

Each floppy image is a nonbootable 1.44 MB FAT12 disk. Start DOS, insert the disk and run A:\INSTALL.EXE. Install an ASPI manager such as AHCIASPI 0.5, EUSBASPI 0.5 or an Adaptec-compatible manager first; DOS and ASPI managers are not bundled. The exFAT package needs no ASPI.

Changes since 0.1.0 Alpha 3

ASPIFDD: SyQuest drives

  • ASPIFDD now also takes SyQuest drives (EZ135, EZFlyer, SyJet, SparQ), next to ZIP, Jaz, LS-120 and the others. ASPIDSK leaves them alone.
  • The EZ135 and EZFlyer are ATA drives, not ATAPI. AHCIASPI 0.5 offers them as SCSI disks, on IDE channels and on AHCI ports (through an IDE to SATA adapter).
  • A drive the BIOS already uses as a hard disk stays with the BIOS. ASPIFDD reports it as BIOS/DOS-owned and skips it.

ASPIFDD and ASPIDSK: hardware write protection

  • When a medium is read in, MODE SENSE asks for its WP bit. A protected medium then fails every write at once with DOS error 00h ("write protect"), without the write being sent to the drive.
  • This covers DOS, EXFAT.SYS and raw IOCTL writes. A medium change clears it.
  • A device that doesn't report the bit is written to as before, and its own refusal gives the error.

ASPIFDD and ASPIDSK: Shuttle parallel port managers

  • Shuttle's SD120PPD.SYS 5.46 (parallel port LS-120) hangs on GET DISK INFO and answers every LUN with LUN 0's drive.
  • INIT now recognises this manager, does without GET DISK INFO and registers LUN 0 only. Before, INIT hung after the first INQUIRY.

Validation and scope

Tested in 86Box:

  • SyQuest EZ135 and EZFlyer 230 through the BIOS
  • the same drives through SyQuest's SQATDRVR.SYS 1.75
  • a write-protected cartridge
  • an EZ135 cartridge in the EZFlyer
  • the drives through AHCIASPI and ASPIFDD, with FAT16 and with EXFAT.SYS
  • parallel port ZIP 100 / ZIP 250 through Iomega's ASPIPPM1/ASPIPPM2
  • parallel port LS-120 through Shuttle's SD120PPD.SYS

The 86Box tests use the SyQuest and parallel port drives of 86Box PRs #8697 and #8698.

Tested in QEMU:

  • the EZFlyer on an AHCI port, once owned by the BIOS and once free
  • write protection through EUSBASPI on a read-only USB disk

The existing host checks, DOS suites and the installation of both language disks and the exFAT package have passed for this build.

This is a development release, not yet tested on real SyQuest hardware: keep backups of important data. Tape writes are not yet qualified for production backups on real media. See the remaining driver work and the individual driver/tool READMEs.

🤖 Generated with Claude Code