Skip to content

OpenASPI 0.1.0 Alpha 6

Pre-release
Pre-release

Choose a tag to compare

@geosone geosone released this 13 Nov 15:50
· 8 commits to main since this release

Sixth alpha of the OpenASPI DOS driver suite. New: ASPIFDD gives EUSBASPI's hot plug slots a drive letter, USB disks the BIOS already serves stay with DOS, BackPack floppy drives go to ASPIFDD, a USB test matrix over every host controller in QEMU, VirtualBox and 86Box, and the relicense to the GPL version 2 or later.

Downloads

  • openaspi-*-us-disk1.img / openaspi-*-gr-disk1.img: English / German OpenASPI installation disk.
  • openaspi-*-us.zip / openaspi-*-gr.zip: the corresponding complete package for installation from a directory.
  • exfat-0.4-us-disk1.img / exfat-0.4-gr-disk1.img and the matching ZIPs: the exFAT package on its own (EXFAT.SYS, EXFMT, EXCHK). The programs are unchanged since Alpha 3; only the license texts are new.
  • SHA256SUMS and BUILDINFO.txt: checksums, source revision and build dependencies.

Each floppy image is a nonbootable 1.44 MB FAT12 disk. Start DOS, insert the disk and run A:\INSTALL.EXE. Install an ASPI manager first, such as AHCIASPI 0.6, EUSBASPI 0.6 or an Adaptec-compatible manager. DOS and ASPI managers are not bundled. The exFAT package needs no ASPI.

Changes since 0.1.0 Alpha 5

ASPIFDD: drive letters for USB hot plug slots

  • With /H, EUSBASPI offers empty targets named "USB slot n". They answer MEDIUM NOT PRESENT until a stick is plugged in.
  • ASPIFDD now takes these slots. Each one gets a letter, like an empty ZIP drive, and the stick is read once it is there.
  • An INQUIRY answer that is shorter than requested (with a residual count) is no longer rejected as empty.

USB disks served by the BIOS

  • EUSBASPI 0.6 takes over the INT 13h of USB disks the BIOS already offers (for example a USB boot stick). It reports them through GET DISK INFO.
  • ASPIDSK and ASPIFDD leave such a disk alone while DOS has a drive on it, and mount it when DOS does not.

ASPIFDD: devices named FLOPPY

  • A floppy drive offered as a SCSI target now belongs to ASPIFDD, not ASPIDSK. An example is PORTASPI's BackPack floppy drive (MICROSOL BACKPACK FLOPPY).

License

  • OpenASPI's own code is now under the GNU GPL version 2 or (at your option) any later version.
  • Some parts stay under version 3: the GDI installer, and ASPIMGR.EXE and ASPIDDG.EXE (which link Open386MAX's QUILIB). Their license text comes along as GPL3.TXT.
  • Setup shows all three licenses: OpenASPI, GPL3, and SHSUCD.LIC for SHSUCDX/CDAUDIO.

Native layer (not part of the DOS disks)

  • A C ASPI layer for 32/64-bit kernels, with shared SCSI/ATAPI/SAT handling, interrupt-driven completion (INTx, MSI-X) and SMP locking.
  • The FAT/exFAT library moved to openfat.

Validation and scope

New USB tests:

  • QEMU (dos_usb_matrix.sh): UHCI, OHCI, EHCI and xHCI, each with a multi-LUN USB device (hard disk, CD-ROM, ZIP 100 superfloppy) and a second stick, plugged in after the BIOS. ASPIDSK, ASPIFDD and ASPICDA read and copy files, and the host compares them and runs fsck.
  • 86Box (dos_86box_usb.sh): the USB mass storage device with a hard disk, CD-ROM and ZIP on PIIX4 UHCI, the OPTi 82C861 OHCI card and the VIA VT83C572 UHCI card.
  • VirtualBox: OHCI, EHCI and xHCI with two sticks and a USB DVD drive.
  • dos_cda_usb.sh: ASPICDA with SHSUCDX on a USB CD, both with a full command set and with a minimal firmware that rejects READ SUB-CHANNEL, MODE SENSE, SEEK and others.

All DOS test suites (except the mhVTL tape test, which needs an external setup) have passed for this build.

This is a development release, not yet tested on real hardware for the new functions: keep backups of important data. Tape writes are not yet qualified for production backups on real media. See the remaining driver work and the individual driver/tool READMEs.

🤖 Generated with Claude Code