Repository navigation
OpenASPI v0.1.0-alpha.8
Pre-releaseEighth alpha of the OpenASPI DOS driver suite. ASPIDSK can now offer its disks as BIOS hard disks (INT 13h), so tools such as NTFSDOS can read NTFS partitions on them (#2).
Downloads
openaspi-*-us-disk1.img/openaspi-*-gr-disk1.img: English / German OpenASPI installation disk.openaspi-*-us.zip/openaspi-*-gr.zip: the corresponding complete package for installation from a directory.exfat-0.5-us-disk1.img/exfat-0.5-gr-disk1.imgand the matching ZIPs: the exFAT package on its own (EXFAT.SYS, EXFMT, EXCHK), unchanged since Alpha 7.SHA256SUMSandBUILDINFO.txt: checksums, source revision and build dependencies.
Each floppy image is a nonbootable 1.44 MB FAT12 disk. Start DOS, insert the disk and run A:\INSTALL.EXE. Install an ASPI manager first, such as AHCIASPI 0.6, EUSBASPI 0.10 or an Adaptec-compatible manager. DOS and ASPI managers are not bundled. The exFAT package needs no ASPI.
Changes since 0.1.0 Alpha 7
ASPIDSK /I13: the disks as INT 13h drives
- Programs that read disks through the BIOS (NTFSDOS, disk editors, EXFAT.SYS's BIOS back end) do not see ASPI disks. With
DEVICE=ASPIDSK.SYS /I13every disk ASPIDSK takes also gets a BIOS drive number after the BIOS's own hard disks (80h + the count at 0040:0075, which grows accordingly). - This includes disks without a FAT volume, such as a disk with only an NTFS partition: it gets no drive letter but an INT 13h drive. If there are only such disks, ASPIDSK stays resident as a character device.
- Functions: reset, status, CHS read/write/verify, parameters (08h), type (15h), and the extensions 41h–44h, 47h, 48h (EDD 1.1, LBA). CHS uses 255 heads and 63 sectors. Up to 8 disks with 512-byte sectors, below 2 TB.
- Writes through INT 13h bypass DOS: do not write a volume that also has an ASPIDSK drive letter that way.
/I13is not offered by the installer yet; add it to theDEVICE=line of ASPIDSK.SYS by hand.
Validation and scope
New test: dos_ntfs_i13.sh (MS-DOS 7.1, EUSBASPI, a FAT16 stick and a disk with only an NTFS partition; also with the NTFS disk alone). A test program checks the INT 13h functions, including writes. Sysinternals NTFSDOS 3.02R mounts the NTFS partition through ASPIDSK and reads files (local test only; NTFSDOS is not part of OpenASPI). The NTFS4DOS build we had crashes in its DOS extender even on a plain IDE disk without OpenASPI, so it could not be tested.
All DOS test suites (except the mhVTL tape test, which needs an external setup) have passed for this build.
This is a development release, not yet tested on real hardware for the new functions: keep backups of important data. Tape writes are not yet qualified for production backups on real media. See the remaining driver work and the individual driver/tool READMEs.
🤖 Generated with Claude Code