v2.1.0

• Only your phones control the clock (clock firmware v2.1.0+): the clock lets in only phones paired with it ("Just Works", no PIN; up to 5 phones), and a new phone can pair only within 2 minutes after the clock is powered on or after a 5-second touch of its touch pad. The app pairs on connecting; when the clock refuses, it says how to open pairing on the clock and can forget a stale pairing. Clocks with older firmware connect as before
• Connection screen: until the clock is connected, its screen shows the connection under way (connecting, pairing, loading) or why there is none, with a retry, instead of the clock's cards with empty values
• Live clock list: a clock switched on shows up in the list while it is open, and one not heard for 15 seconds (switched off, out of range) leaves it; the list keeps its order as clocks come and go
• Fixed opening a clock right after leaving another one connecting the old clock again under the new clock's screen
• Fixed pairing with a clock that refuses the phone: Android's pairing prompt no longer drops the connection, the refusal stays on screen instead of an endless reconnect, and the clock's cards appear only once the phone is paired
• The settings screen no longer slides under the header
• New look: the top bar takes the theme's colors instead of black and shows the open clock's name; the big name card is gone. The Settings tab is ordered Firmware, time accuracy, Bluetooth (the clock's MAC address and its name), WiFi, Matrix (resolution, pixel color order) and System (module, CPU, flash, timer chip and its temperature), each parameter its name above its value
• Fits an enlarged system font (checked at 1.25x): smaller title sizes from the theme, time cards of equal height, units kept on the line of their number
  Full Changelog: v2.0.0...v2.1.0