Repository navigation
Overview Guide
This is an overview of the process of FM RF archival capture via a Domesday Duplicator and software defined conversion of said FM RF capture into human usable data with ld-decode.
Laserdiscs have a number of complexities and features that require determining the best way to decode each disc on an individual basis.
This repository contains multiple scripts to be executed in sequence for different steps of the process.
Laserdiscs have many different features and video encoding differences. You should take note of the following things when you are assessing a disc to capture, note I do mean disc not "movie" as different discs in a release can be different:
- CLV vs CAV
- Analog Audio
- Digital Audio
- AC3 Audio / Mono Analog
- DTS Audio
- Closed Captioning (Subtitles)
It can be helpful to take a photo of the front and back of the jacket for the release to have this information on hand later when processing files.
When working with a Domesday Duplicator you should aim to get a complete
capture of an entire disc from start to finish. Depending on how the disc
works (CLV vs CAV) the resulting 10-bit packed LDS file can be around 50-150GB.
You will want to run ld-compress to compress the RAW data to FLAC and save 40-60% space making an .ldf file.
These files are not watchable and can have time base errors due to how the player physically spins up the disc to play.
The capture stage and resulting files are the "source" files that you derive everything else from.
If you are making long term backups these are the only files you need to keep as everything else can be remade from them and the software may be improved later and yeild better results.
After getting a raw PCM data capture you need to convert it to a human usable format
using ld-decode. This will give you a TBC file that can be viewed with
ld-analysis. This process needs different options depending on the
features your disc has.
First you need to determine the starting frame of the program recorded on the disc. When doing an automated capture of a laserdisc using a serial connection controlled by the Domesday Duplicator software the read head will seek into the disc to start, then move backwards to find the start of the program. This section of head movement needs to be skipped for the decode.
Each frame has a timecode number embedded in it. CLV starts at
frame 0 and CAV starts at frame 1. Frame numbers are different from
"sample" numbers though which are an approximation of frame counts. It
is best to have your TBC file start from the first frame of the program
or you can have issues with the analog audio track.
00-preview.sh provided here can help find the starting frame sample which
can be detected automatically sometimes. A If not, 00-preview.sh takes two
parammeters, first the starting frame number, and then the number of samples
to skip into the raw file. ld-decode will seek backwards to find the starting
frame, so overshooting the samples to let it work backwards is a good option.
It may take multiple rounds of tweaking the starting sample to dial into the
starting frame.
00-preview.sh will output files into a preview/ directory that you can
use to verify you have the correct decode parameters. One thing to pay
attention to is the AC3 audio file. If it is empty or the AC3 log is huge then
the disc does not have AC3 audio and you should disable that parameter in the
10-decode.sh script.
Once you know where to start the decode and if there is AC3 you can run
10-decode.sh to fully decode the raw disc data. This will take hours to
process a full disc even on powerful modern hardware. ld-decode supports
multiple threads, but after testing any more than 6 adds no benefit and can
make it slower.
ld-decode will produce a number of different files:
- TBC: The timebase corrected video data (GREY16, 4fsc Composite Sampled)
- PCM: Analog audio track as signed 16 bit little endian PCM data
- EFM: Digitial data track raw data
- TBC.JSON: Metadata from disc
The files need to be processed again though to get some additional data.
ld-process-efm will extract the digital audio to a similar PCM file.
ld-process-vbi will extract some additional data from the TBC files VBI data space above the video picture area that can
be added to the JSON file.
With that data added the ld-export-metadata can
get the chapters and closed captions.
20-tbc-process.sh does all of this and uses ttconv to create an SRT from
SCC file normally created.
More detailed information:
After extracting all possible data you can create a multi-stream video file with everything the laserdisc had on it. ld-chroma-decoder is intended to be
used with ffmpeg as a piped input for re-encoding. How you choose to create
your final will depend on your preferences. 30-multitrack-output.sh has
everything automated as much as I could for how I prefer to create resulting
videos.
If you opt to compress your video files I would recommend scaling them to be
larger, as nearest neighbor. Laserdisc is low resolution, and the
macroblocking of modern video codecs aren't well suited to it. If you scale
2x with -vf scale=2*iw:2*ih:flags=neighbor your video quality will be much
better after the compression.
Using ffmpeg you can embedd multuple audio tracks into a video container
like MOV. For any PCM files you will need to tell ffmpeg the format of the
audio before you include it with -f s16le -r 44.1k -ac 2. Then you can use
the normal -i $filename include it. You can then -map the included audio
files using the ID numbers for the streams (which start at 0 and include all
inputs). You will likely always be outputting to a single file as well. So to
map the second included file's audio to the output video you would map
-map 1:a:0. This can be done for any kind of audio inputs.
You may also want to adjust the channel of tracks, for AC3 discs you may want
to convert from AC3 encoded audio to PCM and specifying
-channel_layout:a:1 "5.1" -c:a:1 pcm_s16le -osr 44100 where a:1 is the
output audio track will correct the sample rate, re-encode it, and set it as
5.1 surround. You will then likely want to use
-filter_complex "[3:a]channelsplit=channel_layout=stereo[left][right]"
where 3:a is the input ID for the analog audio. Then you can
-map "[left]" to only include the left channel in your output file.
ld-export-metadata chapters and subtitles (as SRT) can be embedded in the
output file. Chapters from the --ffmetadata option and be included with
-map_metadata 4 where 4 is the input file ID.
Subtitles can be included with -map 5:s:0 -c:s mov_text -metadata:s:s:0 language=eng where 5:s is
the input ID. The -c:s mov_text is for an MOV file and will be different
for other video containers.
I have had some audio sync issues with the analog track. It seems to always be slightly slower than the video, digital, and AC3 tracks.
The best way to workaround this is to use a lower samplerate value when importing the PCM file,
I've been using between 44085 and 44089 and then resampling to 44100
which "stretches" the audio to fit correctly.
Based off of Tech Tangents / Shelby workflow guide made for his YT video.
TBC Tools Wiki - © 2026 Harry Munday