Repository navigation
Releases
Readom v0.1.0
Readom v0.1.0 — 把 Android 8.1 装进 Kindle Paperwhite 3。
源码在 https://github.com/hbyxabc/readom,标签 v0.1.0 就指着建出这一版的那棵树。
需要 Kindle Paperwhite 3(第 7 代,2015)、系统 5.16.2.1.1、已越狱。安装不写任何分区,
卡住时按住电源键不放就回到原厂系统。完整说明、出错代码和注意事项在 https://readom.app
这一版有什么(详细的变更和"在设备上验到哪里"见 https://readom.app/#log ):
- 原来的系统和书都不动。长按电源键随时回 Kindle 原厂系统;装不成或起不来,它自己回去。
- 翻页不闪:翻页本身没有黑闪,约每 20 页清一次残影。
- 内置浏览器(EinkBro + 128 内核)和拼音输入法,输入法界面按 Kindle 重做。
- 微信读书墨水屏版一键装上:从腾讯官网下载官方版,装前核对签名。
- 休眠画面是内置的、以白为主,唤醒不闪;熄屏时屏幕上不会留着上一页网页。
- 启动入口里不含任何设备数据:波形、Wi-Fi 校准、存储布局每次启动现场生成。
怎么装:把 Readom.sh 拷进 Kindle 盘的 documents 文件夹,弹出、拔线,在书库里点
"Readom"。系统包由安装器自己下载。Kindle 连的网络下不动时,把
readom-system-v0.1.0.img.zst 也拷进同一个文件夹,安装器就不联网了。
20a7f7e86860ccdb35d05cadf9d7e15e8c3204e952bebff94c828e28401c8ac1 Readom.sh
497fc91910211839f83d1bff711ad05325fb6ad2778bcdd973feba58f054fc1f readom-system-v0.1.0.img.zst
SHA256SUMS 这个附件就是上面这两行。在两个文件所在的文件夹里跑
shasum -a 256 -c SHA256SUMS 核对。
这一页上的其余文件是源码,按 GPL、LGPL 等许可随发行提供:Readom-aosp-sources.tar.xz
(镜像里这些文件来自的 AOSP 项目,按构建用的版本取出并打上本项目的补丁)、
linux-3.0.35-amazon-5.16.2.1.1.tar.gz(亚马逊发布的内核源码原样)、
einkbro-16.7.1-source.tar.gz、rime-ice-da1fbe6-source.tar.gz。
SOURCES.md 写明镜像里每一个这样的文件对应哪一份源码,以及体积超过发行页上限的那一份
(Chromium)的书面要约;sources.json 是同一份内容的机读版,每个压缩包的 SHA-256 在它的
assets 里。装这个系统不需要下载源码。
Readom v0.1.0 — Android 8.1 on the Kindle Paperwhite 3.
The source is at https://github.com/hbyxabc/readom, and the v0.1.0 tag points at
the tree this was built from.
It needs a Kindle Paperwhite 3 (7th generation, 2015) on firmware 5.16.2.1.1,
jailbroken. The install writes no partition; if it hangs, holding the power button
down gets you back to the stock system. The full instructions, the error codes and
what to watch out for are at https://readom.app
What this version is (the full list of changes, and how far each was verified on
the device, is at https://readom.app/#log ):
- The stock system and your books are left alone. A long press of the power button
goes back to the Kindle's own system at any time; if the install or the start
fails, it goes back by itself. - Turning a page does not flash: no black flash per page, a clearing pass about every
20 pages. - A browser (EinkBro with the 128 WebView) and a pinyin keyboard whose interface was
redrawn for the Kindle. - WeRead's e-ink edition in one tap: the official build, downloaded from Tencent and
checked for its signature before it is installed. - The sleep screen is built in and mostly white, and waking does not flash; a web page
is never left on the screen when it sleeps. - The entry carries no per-device data: the waveform, the Wi-Fi calibration and the
storage layout are taken from the device at every start.
How to install: copy Readom.sh into the documents folder on the Kindle's
drive, eject, unplug, and tap "Readom" in the library. The installer downloads the
system package itself. If the Kindle's network cannot deliver it, copy
readom-system-v0.1.0.img.zst into the same folder and the installer goes nowhere.
20a7f7e86860ccdb35d05cadf9d7e15e8c3204e952bebff94c828e28401c8ac1 Readom.sh
497fc91910211839f83d1bff711ad05325fb6ad2778bcdd973feba58f054fc1f readom-system-v0.1.0.img.zst
The SHA256SUMS asset is those same two lines. Verify with
shasum -a 256 -c SHA256SUMS from the folder both files sit in.
The rest of the files on this page are source, handed out with the release as the
GPL, the LGPL and the other licences require: Readom-aosp-sources.tar.xz (the AOSP
projects the image's such files came from, at the revisions built and with this
project's patches applied), linux-3.0.35-amazon-5.16.2.1.1.tar.gz (Amazon's
published kernel source as it is), einkbro-16.7.1-source.tar.gz and
rime-ice-da1fbe6-source.tar.gz. SOURCES.md says which source answers for each
such file in the image, and carries the written offer for the one too large for a
release page (Chromium); sources.json is the same thing machine-readable, with each
archive's SHA-256 under assets. Installing the system needs none of these.