You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This commit was created on GitHub.com and signed with GitHub’s verified signature.
Added
boardwright sch DIR repoint OLD_LIB:OLD_NAME NEW_LIB:NEW_NAME [--body keep|library]
points every part that uses one library symbol at another, across all
sheets, and refuses when the pin numbers differ (#8).
Changed
The current review measures how narrow a pour gets between the two pads
and fails a pour that necks below the IPC-2221 width, instead of accepting
any single piece. Parallel channels are not added together, so a pad fed
through thermal spokes measures as one spoke (#5).
Fixed
A footprint's own zones (an RF module's antenna keep-out) were left in the
library's coordinates when kicad-tools created the board, so they sat beside
the part and KiCad reported the footprint as differing from its library.
They are now placed with the footprint; KiCad accepts the result at 0, 90
and 180 degrees on top and 0 and 90 on the bottom. The ESP32-C3 example no
longer ignores that check (#6; upstream rjwalters/kicad-tools#8958).
The LDO example's output capacitor is a 22 uF tantalum, as the AMS1117
datasheet asks for stability; it was a ceramic (#6).