Repository navigation
Releases
v0.6.0
New: Aero-L3 joins the stable version, next to Aero-GCP, Aero-Space and Aero-Exports.
Aero-L3 prepares the photos of a DJI Zenmuse L3 for Metashape, without DJI Terra. Point it at the mission folder: it reads every flight, checks the photos, then creates a chunk ready to align.
- Both lenses as a multi-camera rig, each with its own DJI calibration.
- Positions with an accuracy taken from the RTK status of each photo (fixed, float or single).
- A starting orientation for every camera, so pictures no longer come out flipped after the alignment. Cameras that still end up flipped are reset and aligned again.
- Checks before anything is created: mixed L3 units, rotated files, missing partners, lens tilt.
- Optional steps afterwards: alignment, camera optimization, DEM and orthophoto.
Since v0.4.0, also in this version:
- Aero-Exports keeps a list of exports: tick the formats, add them, then run them all in one go.
- A Dependencies window installs the Python packages a tool needs.
- Metashape no longer crashes on exit, and the Aero menu no longer disappears when a second tool is opened.
Earlier dev builds had a report of Metashape freezing when Aero-L3 was opened with the Aero-GCP panel open (#1). We could not reproduce it on this version. If you see it, please reopen the issue.
Update: Aero > Check for updates..., or download the zip of the main branch again.
Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact info@helix.corsica.
v0.6.0-dev
Dev version, same tools as the stable v0.6.0 (Aero-GCP, Aero-Space, Aero-Exports, Aero-L3). Download the zip of the dev branch, or use Aero > Check for updates....
Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact info@helix.corsica.
v0.4.0
New: Aero-Space and Aero-Exports join the stable version, next to Aero-GCP.
- Aero-Space finds the old Metashape projects that fill your disk, then lightens or deletes them (with a safety copy).
- Aero-Exports writes the orthomosaic and the DEM with short names, in several formats, pixel sizes and coordinate systems, including an AutoCAD drawing.
- The Aero menu now lists the tools first, and a HELIX AERO logo button in the menu bar opens it.
Update: Aero > Check for updates..., or download the zip of the main branch again.
Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact info@helix.corsica.
v0.4.0-dev
Dev version, same tools as the stable v0.4.0 (Aero-GCP, Aero-Space, Aero-Exports). Download the zip of the dev branch, or use Aero > Check for updates....
Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact info@helix.corsica.
AeroTools 0.3.1
Fix: the Aero-GCP panel opens only once. Clicking Aero > Aero-GCP again brings the open panel to the front instead of opening another one.
New: a cross at the top right of the panel closes Aero-GCP, and the banner line is centred.
Update: Aero > Check for updates..., or download the zip of the main branch again.
Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact info@helix.corsica.
AeroTools 0.3.1 (dev)
Same fix as the stable version: the Aero-GCP panel opens only once, and a cross at its top right closes it. The dev branch still carries Aero-Space and Aero-Exports.
Update: Aero > Check for updates..., or download the zip of the dev branch again.
Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact info@helix.corsica.
AeroTools 0.3.0
First release of AeroTools, the Metashape plugins by HELIX AERO.
Aero-GCP finds the ground control points in your photos with AI and helps you mark them fast: review, adjust, residual check and a client PDF report.
Install: download the zip of the main branch, unzip it, double-click CLICK HERE TO INSTALL.bat, restart Metashape, then open Aero > Install plugins... and install Aero-GCP. The README has the details.
Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact info@helix.corsica.
AeroTools 0.3.0 (dev)
The dev branch: stable plus the tools that are still being tested.
- Aero-GCP: AI marking of ground control points.
- Aero-Space: finds the heavy Metashape projects on a drive and lightens them, with a safety copy.
- Aero-Exports: orthomosaic and DEM export (GeoTIFF, JPEG, JPEG 2000, ECW, DXF/DWG) with safe writing and height grids.
Install: download the zip of the dev branch, unzip it, double-click CLICK HERE TO INSTALL.bat, restart Metashape, then open Aero > Install plugins... and install the tools you want.
Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact info@helix.corsica.