Repository navigation
List screw sizes profiles ANSI/ASME B1.1 / ASME B18.6.1, particularly for countersinks #1534
Closed
andrewnicols
started this conversation in
Ideas
Replies: 1 comment 1 reply
|
@andrewnicols the countersink now has inch sizes too: under Screw size, after the metric ones, there are #2 to #14 to ASME B18.6.1. One pick sets the cone to 82°, the head to the largest diameter the standard allows, so the screw head sits flush (#6: 7.09 mm), and the shaft to a clearance hole (#6: 3.9 mm). They are the same numbers as the Australian gauges, so for a 6-gauge screw pick #6. The double countersink and the hole pattern have them as well. This comes with the next version of layerling. |
1 reply
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
Here in Australia it's common to buy wood screws by gauge - for example a "6-gauge 25mm" screw. This is per Australian Standard AS3566.1-2002.
The closest ANSI standard is ANSI/ASME B1.1 with the countersink being described in B18.6.1 with screws referred to in the format "#6" or "#6-20" (number six with 20 threads per inch). Per https://www.engineersedge.com/hardware/ansi_wood_screws_per_ansi_b1861__14855.htm the head angle is 80-82 degrees (typically 82 from what I can find).
The ISO 1478 standard also defines a similar profile but the countersink angle is 90 degrees.
Now I doubt anyone is going to 3D print a wood screw, but it would be extremely helpful to have countersinks specified in the ANSI and/or ISO standard for making wall brackets.
Thanks again!
All reactions