Repository navigation
layerling 1.155.0
-
The ribbon fits the window again (Discussion #1533): The two widths at which the toolbar icons shrink (2215 and 1897 px) were measured when the ribbon was narrower. Between about 1900 and 2050 px the ribbon was wider than the window, so groups such as Surface or Mirror & Pattern slipped under their neighbours; the same, a little less, between 2215 and 2375 px. Measured anew: the full size needs 2369 px, the middle step 2045 px, and the thresholds are 2375 and 2050 px.
-
Checkboxes keep their space to the text (Discussion #1536): In the Lid, Offset, Flexi and cookie cutter windows the box sat against its text. The rule that gives the row its gap (
.offset-copy) was overruled by.edge-modifier-field, which comes later in the stylesheet; it now names both classes. -
Custom shapes: search and order (Discussion #1537): The search in the shape library left the custom shapes out. It now finds them by name, also those inside folders, in a section above the library's matches, and says "No shapes found" only when neither matches. A button beside the folder button puts the custom shapes in order by name (A to Z) instead of by the day they were saved; the choice stays in the browser (
layerling.myShapesOrder). Texts in 19 languages, guide chapter 3 in 15, card. -
Recessed countersinks (Discussion #1531): The countersink and the double countersink have a field Recess: a straight pocket as wide as the head sits above the cone, that many millimetres deep, so the screw head ends below the face instead of flush with it; on the double countersink at both ends. The total length includes it, 0 leaves the hole as before, and it works with a slot, in the mesh and in the exact body. Also in the MCP setting
screwHoleRecessand the .lyl file. -
Inch screw sizes for countersinks (Discussion #1534): The countersink's Screw size list offers the numbered inch sizes #2 to #14 after the metric ones, for wood and machine screws to ASME B18.6.1; they are also the gauges Australian wood screws are sold by (AS 3566, a 6-gauge is a #6). One choice sets the cone to 82 degrees, the head to the largest diameter the standard allows (a sharp edge, so the head sits flush: #6 7.09 mm) and the shaft to the body diameter plus the room ISO 273 medium gives a metric screw of that diameter (#6 3.9 mm). The double countersink and the countersunk holes of the hole pattern take them too; a hole pattern's countersink keeps the angle the size set. The counterbore and the finishing washer stay metric. Asked for by @andrewnicols.
-
Save designs as a download, without the save dialog (Discussion #1449): The settings get a switch Save designs as a download under Appearance, beside Save STL as a download. With it on, Export > LYL, Ctrl+S and Save as skip the save dialog of Chrome and Edge and download the design, as Firefox does. On some PCs that dialog hands back no file for any folder but one, so every save had to fail first before Download instead could be clicked. An STL export whose dialog hands back no file used to end without a word; it now says "Nothing saved" too, with the same Download instead button. Asked for by @mickdastick.
-
A move no longer sticks to the pointer when the mouse button's release gets lost (Discussion #1540): Now and then, with a Magic Mouse for one, the release of the button never reaches the browser, so layerling kept waiting for it and the part, or a handle or box being dragged, followed the pointer with no button held. A mouse that moves with no button held now ends the move, the handle drag, the selection box or the paint lasso where it is, as the release would have. Touch and pen are left as they were. Reported by @MartinShake in Discussion #1540.
-
A loft between sketches has no hole where a rounded frame meets a ring: The inner side of a rounded frame had lost its rounds and had as many pieces as the circle it was lofted to, so the kernel joined them side to quarter and turned the inner wall through the outer one, which left a hole. Outlines with as many pieces whose corners do not face each other now get corners in the same directions first.
-
Danish (PR #1532): Nine fixes in the release notes and the guide (runder, bue, spillerum, mesh). By @Henrikth12.