Repository navigation
0.17.0
3D printing checks that see where a print starts in the air, a tool to replace a component, and several guards against long or crashing calls. 87 tools.
Added
check_printabilityfinds where a print starts in the air, also where no face leans past the overhang limit.islands: a point, edge or patch lower than all around it with nothing beneath.unsupported_edges: stretches of an edge the material rises from with air right below, such as the ends of a chamfered pad's edge that rests on a tube only in the middle. Each comes with its height above the bed, where it is and its faces.replace_component(name, path)puts another file in a component's place, keeping its position and, where they find their faces, its mates.list_componentsflags a component that shows no geometry.add_shellopens several faces at once: directions and list_faces indexes,["+z", "#5"].set_dimensionnames the features it breaks inbroken_features(a later cut now off the part, a split whose bodies moved).list_dimensions(contains=...)filters by name or feature, for parts of hundreds of features.cut_profile_through_planeandadd_extruded_profile_on_planealso take the points as [u, v] in the plane's own frame.
Fixed
- [u, v] points given where [x, y, z] were expected took SolidWorks down. The points' shape is now checked before any sketch opens.
- The wall-thickness check could outlast the 2-minute call limit and return nothing. It now stops after a minute with the rays spread over all faces, and says how many it measured.
- A STEP, IGES or Parasolid import over 30 MB is refused unless
allow_large=True: a 77 MB STEP ran past the call limit and kept SolidWorks busy, with popups.
See the changelog for details.