Skip to content

CirrusAudioFixup v1.2.0

Latest

Choose a tag to compare

@github-actions github-actions released this 05 Nov 19:27

CS35L41

  • Added HP ENVY x360 15-ey0xxx support (CSC3551, subsystem 103C:8A31) over I2C with internal boost topology.
  • Added Alienware x17 R2 / Dell Horizon 17 support (CSC3551, subsystem 1028:0B28) over SPI with Tiger Lake-LP GPIO chip select.
  • Added ASUS Zenbook 14 UM3402Y support (CSC3551, subsystem 1043:1683) over I2C with switched external boost.
  • Added Tiger Lake-LP GPIO controller support (INTC1055, INT34C5) for native and GPIO-driven SPI chip select lines.
  • Fixed ACPI _DSD metadata evaluation to handle kIOReturnLockedWrite (0xE00002C4) and kIOReturnUnsupported, ensuring clean fallback to verified board metadata.
  • Corrected HP ZBook Fury 16 G9 GPIO resources in board tests.
  • Added clock wait recovery on cold start power-up timeout.
  • Added authorized AMD GPIO reset preparation before I2C amplifier identity reads.
  • Corrected AMD GPIO reset pulse polarity to assert low and release high for active-low lines.
  • Synchronized GPIO debounce revision threshold to 0x92 to match Linux driver specifications.

Implementation: PR #11, PR #13 (closes #12), PR #15 (closes #14).

CS35L56

  • Added initial CS35L56 B0 smart amplifier family driver for both SPI and I2C buses.
  • Added ASUS ROG Zephyrus G16 GU605MV (2024) support (CSC3556, subsystem 1043:1C63) over SPI.
  • Added Lenovo ThinkBook 16p G6 IAX support (CSC3556, subsystem 17AA:391E) over I2C (0x31 Left, 0x30 Right) with software register reset.
  • Added ASUS ROG Zephyrus G14 GA403UV support (CSC3556, subsystem 1043:1B13) over I2C with 4-channel HDA stream support.
  • Added multi-frame sequence write (writeSequence) on I2CRegisterBus for chunked WMFW uploads over I2C.
  • Filtered broadcast I2C addresses (0x3A, 0x3C) from endpoint discovery.
  • Added dynamic ASP RX channel routing based on amplifier binding index.
  • Added per-amplifier EFI calibration decoding (CirrusSmartAmpCalibrationData) and runtime verification.
  • Fixed firmware-boot ordering before device identification and IRQ mask readback validation.

Implementation: PR #10 (closes #8), PR #17 (closes #16), PR #19 (closes #18).

Platform & Infrastructure

  • Added native ACPI _DSD reference evaluation and _CRS serial-bus/GPIO resource discovery.
  • Supported 4-channel HDA stream formats (0x0033: 48 kHz, 24-bit, 4 channels) in HDAStreamWatcher and playback validation.
  • Deferred startup for dynamic ACPI profiles (CSC3551, CSC3556) when PCI subsystem ID publication is pending.
  • Added Meteor Lake-P GPIO controller support (INTC1083, INTC105E).
  • Extended bounded WMFW uploads for larger images and region counts, keeping workspaces off the kernel stack.
  • Automated release publishing and draft management in CI workflows.
  • Added native macOS Debug and Release builds to pull request verification.
  • Documented quad-speaker codec routing and HDA verb sequences in docs/hardware/codec_route.md.

Checksums (SHA-256)

24ea80ecc3cec68cc9d123e1e40db6ad73038987f914e8f62503fa976767bc81  CirrusAudioFixup-1.2.0-RELEASE.zip
af3ab4e672f4d5951793c845275b678745d73b9a336d9d8395f0e73d388829f7  CirrusAudioFixup-1.2.0-DEBUG.zip