Skip to content

Releases

Raspberry-LRPT v1.37.1

Choose a tag to compare

@holifo holifo released this 22 Nov 15:05
8534242
  • Spectrogram: no striped band at the end. When a pass ends, SatDump stops receiving but takes a minute or two to make the images, and meanwhile its web server keeps answering with the last spectrum. The spectrogram recorded those repeats as new rows, which showed as vertical stripes after the end of the pass. It now leaves out a spectrum identical to the one before, stops after 10 of them, and trims any at the end when drawing.
  • The install's "Another install is already running" message no longer lists its own check among the running processes.

Update a station: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh

Raspberry-LRPT v1.37.0

Choose a tag to compare

@holifo holifo released this 22 Nov 08:31
9b6ca77
  • New: Admin > Settings. Every station setting on one page (/admin/settings), in ten
    sections with the rarely used ones folded under "Advanced", a search box and a Save bar that
    counts your changes. Saving checks every value, keeps it in config/settings.local.yml (so
    updates keep it) and applies most settings at once; changes to the schedule reschedule the
    passes. Settings only the install can apply (receiver, web ports, HTTPS, NTP, location, ...) are
    saved and marked "waiting for the install" until you run ./install_and_upgrade.sh. The admin
    password, admin login and Discord webhook stay SSH-only. See
    Admin > Settings. This page has not had a security review: use it at
    your own risk, preferably over HTTPS.
  • Blank night images are no longer kept. At night the channels that need sunlight (1-3) are
    empty, so MSA, AVHRR 221, MSU-MR 124, Natural Color and the channel 1-3 images came out white or
    yellow. After each pass the station now checks each channel's picture and deletes every image
    made from an empty one; dawn and dusk passes with some sunlight keep theirs. Setting
    drop_dark_images (on).
  • Safer settings files. Text settings (station name, location, image lists, NTP server, ...)
    are now quoted in the shell settings and escaped in the web panel's settings, so an apostrophe
    in the station name no longer breaks the web panel.
  • Notice: use at your own risk. The README and the About page now say that this software
    has not had a security review.
  • Settings no SatDump station used are gone: show_sun_elevation, show_pass_direction and the
    nine old map and projection options (meteor_create_*, meteor_map_*, meteor_draw_*).
    image_annotation_location now only takes the nine positions, and lang_setting accepts Hindi.

Update a station: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh

Raspberry-LRPT v1.36.10

Choose a tag to compare

@holifo holifo released this 22 Nov 07:51
9440cd7
  • Old clean-up steps removed. The install no longer looks for files left by much older
    versions of the station, and the docs and changelog no longer mention them.

Update: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh

Raspberry-LRPT v1.36.9

Choose a tag to compare

@holifo holifo released this 22 Nov 07:47
9d0ab65

Changes since v1.35.0:

v1.36.9 (2026-11-22)

  • The uninstaller asks before removing shared software. rl1_uninstall.sh now asks
    whether to remove the web server (nginx and PHP) and the RTL-SDR driver package, which other
    programs may use; Enter keeps them. With nginx kept, the web panel's site goes and your own
    site comes back if the install saved a copy. It also leaves your other cron jobs alone and
    removes all of the station's sudo rules and its logrotate file.
  • New page: what the install changes on your Pi: everything it
    removes, replaces, blocks and adds, and when.

v1.36.8 (2026-11-22)

  • The install asks before replacing your own website. The web panel uses nginx's default
    site. If the Pi already serves its own site there, the install now shows it and asks
    "Replace it with the web panel?" (default no). Yes keeps a copy as
    default.before-raspberry-lrpt-<date>; no stops before anything is changed. A Pi with nginx's
    untouched sample page, or an earlier web panel, is not asked.
  • The install no longer checks for or removes remote-access programs you may have installed.

v1.36.7 (2026-11-22)

  • The install leaves more of your Pi alone. It no longer switches off or removes any of the
    Pi's own network protection, so a Pi that does other jobs keeps its own setup.

v1.36.6 (2026-11-22)

  • The install no longer replaces your own time service (issue #1). Installing ntpsec, which
    keeps the station's clock, removed chrony, so a Pi that was also a GPS stratum-1 NTP server lost
    it. If chrony or openntpd is installed, the install now leaves the time service alone and says
    so; ntp_server is then not used. The install summary and the verification tool show and check
    the service you have.

v1.36.5 (2026-11-22)

  • About page in tabs. About now has four tabs: Station (version, update check and credits),
    Meteor-M, ISS (when the ISS is switched on) and Sources, so each part fits on one
    screen instead of one long page. Links can open a tab directly: /about#meteor, /about#iss,
    /about#sources; the footer's "update available" note opens the Station tab.
  • A photo of your station on About. ./scripts/station_photo.sh photo.jpg "QFH on the roof"
    puts a picture of your station at the top of the Station tab (tap it to see it full size).
    The script turns it upright, shrinks it and removes all its metadata, including any GPS
    position, because the page is public. --caption changes the caption and --remove takes it
    off. The clean-up of old images leaves it alone.
  • Link to the project on GitHub. The footer's "Raspberry-LRPT vX" on every page now links to
    the public repository (github.com/holifo/raspberry-lrpt), and About this software has a line
    pointing there for the code, updates and issue reports.

v1.36.4 (2026-11-21)

  • Icons in the top menu. Every menu item now has an icon next to its name. On phones the menu
    shows the icons only, so it fits on one line with room to spare; the name appears when you hover
    over an icon and is read out by screen readers.

v1.36.3 (2026-11-21)

  • About is now the last item in the top menu, after Live log.

v1.36.2 (2026-11-21)

  • SDRplay: the service is restarted after the API is installed. On a station where the service
    had been failing, it started on its own half-way through the API install and then found no
    receiver, so passes stopped after a second with "Could not find a handler for source type :
    sdrplay". The install now reloads the udev rules and restarts the service whenever it installs
    the API or changes the service. A station that already hit this needs sudo systemctl restart sdrplay once (or a reboot).

v1.36.1 (2026-11-21)

  • Install no longer fails on the old PHP repository. Stations that came from raspberry-noaa-v2
    still had its sury PHP repository in apt's sources, although this project uses Debian's own PHP.
    When that mirror was in the middle of an update, apt refused to refresh and the install stopped at
    "System packages". The install now removes the left-over entry.

v1.36.0 (2026-11-21)

  • About tab, with an update check. The Sat info tab is now About (/about; old /meteor
    links still work). At the top it shows the station's software: the installed version, the latest
    version on GitHub, when it was last checked and, when a new version is out, the command to update.
    Further down are the credits and the Meteor-M and ISS information as before. The station looks for
    a new version once a day and after each install (scripts/update_check.sh, a git fetch only:
    it never updates itself). When an update is out, the footer of every page says "vX available" and
    links to About. Turn it off with update_check: false. On phones the menu shows an ⓘ icon for
    About, so all six items still fit.
  • SDRplay: fixed the API service failing to start ("sdrplay (stopped)" in the install summary).
    On a station where SDRplay's own installer had been run before, the install found the API library,
    skipped installing the API and started a service program that wasn't there. The install now checks
    for the service program too and installs the API when either is missing.

Update: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh

Raspberry-LRPT v1.35.0

Choose a tag to compare

@holifo holifo released this 21 Nov 09:22
  • Live picture while a Meteor pass records. The live decode panel on the Passes page now shows a small picture of what has been decoded so far, updated about every 45 seconds: channel 2 by day, infrared at night, north up, with its line count. It appears a minute or two into the pass, once frames are coming in, and grows as the satellite crosses the sky. Each update decodes the frames received so far at the lowest priority and stops SatDump before its slow products step, so it takes a few seconds and never gets in the way of the live decode. It is on by default (live_preview) and skips itself on a Pi with fewer than 4 cores. On phones the picture comes right after the spectrum.

Update: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh

Raspberry-LRPT v1.34.0

Choose a tag to compare

@holifo holifo released this 21 Nov 08:48
  • ISS with one SDR or two, chosen automatically. With two or more RTL-SDRs the ISS now gets its own dongle and records at the same time as the Meteor passes: overlapping passes are all kept and nothing is cut short. With one, it works as before: Meteor passes come first, and the ISS records when the dongle is free (SSTV on event dates, APRS otherwise). The choice is made when passes are scheduled and again when each ISS pass starts, so an unplugged second dongle just falls back to the shared rules.
  • Choose the ISS dongle with the new iss_sdr_device setting: empty for automatic, or an index, a serial number or part of the model name (e.g. Blog V4). iss_bias_tee sets the bias tee on the ISS's own dongle. scripts/switch.sh iss lists the connected RTL-SDRs (index, maker, model, serial) and says which one the ISS uses.
  • The ISS can now run on a station whose Meteor receiver is an Airspy, HackRF or SDRplay, with an RTL-SDR beside it for the ISS.
  • The Passes page no longer marks an ISS pass during a Meteor pass as a conflict when the ISS has its own dongle.
  • Fix: with overlapping passes, an ISS pass between two overlapping Meteor passes made the scheduler keep both Meteors (the second then found the SDR busy). Each pass is now compared with the last pass that was kept.

Update: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh

Raspberry-LRPT v1.33.0

Choose a tag to compare

@holifo holifo released this 21 Nov 08:12
  • ISS APRS on its new frequency, 437.825 MHz. ARISS moved the ISS's APRS packet radio from 2 m (145.825 MHz) to 70 cm (437.825 MHz) in 2026, so the station's APRS recordings heard nothing. APRS passes are now recorded on 437.825 MHz, and the frequency is a new setting, iss_aprs_frequency, in case ARISS moves it again (check ariss.org's station status). The web panel, the Discord posts and the APRS maps show the frequency in use. On 70 cm a 2 m QFH hears little: a 70 cm or dual-band antenna works much better.

Update: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh

Raspberry-LRPT v1.32.4

Choose a tag to compare

@holifo holifo released this 21 Nov 07:38
  • Faster orbit (TLE) updates when CelesTrak can't be reached. Before downloading, the scheduler pinged www.celestrak.org and logged "waiting for DNS resolution" every 5 s for a whole minute on networks that block ping, then spent up to 5 more minutes retrying CelesTrak before it turned to the SatNOGS backup. It now only checks that the name resolves (celestrak.org or db.satnogs.org), tries CelesTrak three times with short timeouts, and moves on to SatNOGS in about a minute and a half at most.

Update: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh

Raspberry-LRPT v1.32.3

Choose a tag to compare

@holifo holifo released this 21 Nov 07:37
  • Install fix for Trixie stations that have Debian's own SatDump. Debian 13 ships SatDump 1.2.2 as two packages, satdump and satdump-data. If they were installed, the install stopped at "Packages and SatDump" with trying to overwrite '/usr/include/satdump/…', which is also in package satdump-data. The install now removes any SatDump package that is not the one it brings (Debian's, or the old 2.x alpha) before installing SatDump 1.2.3. Just run the update again.

Update: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh

Raspberry-LRPT v1.32.2

Choose a tag to compare

@holifo holifo released this 19 Nov 13:02
  • Removed the enable_coronal setting that v1.32.1 left behind in config/settings.yml; it no longer did anything.

Update: cd ~/raspberry-lrpt && git pull && ./install_and_upgrade.sh