Issue with the VTX table.

[grek25007]

Hello! I have a DakeFPV F405Wing flight controller. There is no official target for this board in INAV, so the seller provided a custom firmware (attached). I also have a 3W VTX (shown in the photo); although the seller claims it supports SmartAudio, it actually only responds to the IRC Tramp protocol. I’ve configured a toggle switch for power levels: position 1 for level 1, position 2 for level 3, and position 3 for level 5 (maximum). The VTX does react to these changes, but level 3 results in 500mW, and level 5 results in 1000mW—far short of the expected 3000mW. However, selecting 3000mW using the physical button on the VTX unit itself works correctly. The VTX does not accept power settings via the OSD or ELRS. Furthermore, when the craft is armed, the power defaults to 1W. I have already set the maximum power parameter to 3000 in the CLI.





inav_9.0.0_DAKEFPVF405WING(2).hex.txt
I renamed the firmware file extension in order to add it as an attachment.