Repository navigation
v2.0.1 - Soundboard + Detection Fixes
userdeck Configurator v2.0.1 - Soundboard + Detection Fixes
A focused hotfix on top of v2.0.0. It makes the microphone path behave the way it should - picked up on its own at startup, with no delay between what you say and what comes out - adds a second push-to-talk button, and fixes a stubborn case where the app would sit on "searching" and never see your deck. Everything here is host-side, so there is no firmware to reflash.
Mic is picked up automatically at startup
- No more disable / re-enable. Before, the soundboard would come up at login with the mic not actually captured, so you had to toggle it off and on for your voice to pass. The engine now brings itself up cleanly on startup, so your mic is live from the moment the app loads.
Instant mic passthrough
- No more delay. Your voice used to lag behind by up to a second before reaching the virtual cable. The passthrough buffer is now held tight, so what you say reaches Discord / OBS effectively in real time.
A second push-to-talk button
- Bind two keys. You can now set a secondary push-to-talk button alongside the first - holding either one opens the mic. Set or clear each independently in Settings. Great for keeping a keyboard key and a mouse side-button both armed.
Fixed: app stuck on "searching"
- Your deck is always found now. A serial port could get left in a locked state after a crash, a force-quit, or the app restarting its own connection, which made the configurator loop on "searching" and never detect a plugged-in userdeck.
- Clean release every time. The app now lowers the port's control lines and releases it properly whenever a connection ends or you quit, and it waits for the old connection to fully let go before reopening - so it can no longer block itself out of its own device.
- Slow firmware can't wedge it. Writes to the deck now time out instead of hanging, so a busy device can never freeze the connection.
Upgrade
This release is entirely host-side - no firmware reflash needed.
- Install userdeck Configurator v2.0.1 over your existing copy.
- That is it - your soundboards, keymaps, launchers, screen settings, and device choices carry over untouched.
One-time note: if your deck was already stuck on "searching" before updating, unplug and replug it once (or reboot) to clear the locked port. This fix prevents it from happening again; it can't unstick a port that was already wedged.
System requirements
- Windows 10 / 11 (x64)
- A USB port for the userdeck
- Optional: a GC9A01 1.28" round display for the screen features
- Optional: a virtual audio cable for the mic routing (the free VB-CABLE, installable in one click from inside the app)
- ~30 MB disk
Compatibility
- Talks to any userdeck-firmware Pico over CDC + composite HID.
- No firmware change in this release; your current firmware keeps working as-is.
- The microphone and push-to-talk features are Windows features (they read live button and audio state from the OS).
Notes
- Push-to-talk gates the microphone only; soundboard effects always play. Either bound button opens the mic.
- Sounds are played by the Configurator, so keep it running (it lives in the tray) for the soundboard - deck or keyboard - to work.
- Quitting from the tray releases the deck cleanly. A hard End Task kill can still leave a port locked until you replug; quit normally to avoid it.
- Still fully offline apart from the optional one-time VB-CABLE download. No telemetry, no network calls otherwise.
- Building a deck from scratch? See the README for the hardware BOM and assembly notes.