Repository navigation
v3.0.0 - The Display, Reimagined
userdeck v3.0.0 - The Display, Reimagined
The round screen has been rebuilt from the ground up. Where it used to be flat black with blocky text, every screen is now composited in a true framebuffer with full anti-aliasing, deep gradients, soft glows, a real typeface, and smooth transitions. It is a different device to look at.
A whole new rendering engine
- Anti-aliased everything. Rings, gauges, dots, numerals and text are all edge-smoothed now, so curves are clean instead of stair-stepped.
- Depth, not flat black. Each screen sits on a deep radial gradient with a subtle vignette and a soft accent glow behind the content, for a sense of depth a flat panel never had.
- Flicker-free. Screens are drawn off-display and pushed in one shot, so updates are clean with no tearing.
Real typography
- A proper font. Labels, page names and track titles now render in a crisp, anti-aliased geometric typeface (true mixed case, not all-caps blocks).
- Hero numerals. The clock, CPU load, volume and timer use large rounded-segment numbers with soft, rounded ends - the centerpiece of every data screen.
Redesigned screens
- Watchface home. Mode pill with a status dot, the page or soundboard name as the hero, a segment clock, and refined page dots that glow on the active one.
- PC stats + Volume. Circular load gauges that fill and colour-code (green to amber to red), with the value at the heart of the ring.
- Now playing. A play / pause glyph and state, the track title, and the artist beneath, with a gentle accent glow while playing.
- Confirm prompts. Proper rounded Cancel / Confirm pills in their accent colours.
- A glowing connection ring. The perimeter bezel lifts to a soft green glow when the configurator is connected.
Smooth motion
- Fade transitions. Flipping pages now fades the new watchface up out of black instead of snapping.
Upgrade
The new look lives in the firmware, so this release needs a flash.
- Install userdeck v3.0.0 over your existing copy.
- Open Settings > Firmware and click Flash to push the bundled v3.0.0 firmware to your deck.
- That is it - your keymaps, soundboards, launchers, screen settings, and device choices carry over untouched.
System requirements
- Windows 10 / 11 (x64)
- A USB port for the userdeck
- A GC9A01 1.28" round display for the screen features (the deck works without one; this update is all about the screen)
- Optional: a virtual audio cable for the mic routing (the free VB-CABLE, installable in one click from inside the app)
- ~30 MB disk
Compatibility
- Talks to any userdeck-firmware Pico over CDC + composite HID.
- The new screen system needs the bundled v3.0.0 firmware; flash from Settings to upgrade. No display? Everything else works exactly as before.
- PC stats, Volume and Now Playing read live state from Windows and are pushed to the deck by the Configurator, so keep it running (it lives in the tray).
Notes
- The redesign is firmware-only; the companion app's controls are unchanged.
- Still fully offline apart from the optional one-time VB-CABLE download. No telemetry, no network calls otherwise.
- Building a deck from scratch? See the README for the hardware BOM, wiring, and assembly notes.