Repository navigation
Releases
TernaryCode 0.1.37
A fix for the new terminal font on macOS.
Fixed
- Claude Code's spinner shows again on macOS. With JetBrains Mono, the terminal font since 0.1.36, the symbols Claude Code draws while it works (✢ ✳ ✻ ✽) appeared as empty boxes. They now come from Menlo, as they did before.
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app
TernaryCode 0.1.36
A new look for the whole window, and the details you check most within reach.
New
- A calmer, clearer window. Panes, drawers, panels and Grid tiles are rounded sheets on the window's base, a few pixels apart. Names are in Inter, data (branches, paths, counts, commands) in JetBrains Mono, which now comes with TernaryCode and is the default terminal font. A small 3 × 3 lattice moves while something works; each project has a tile in its colour.
- Waiting for you is a queue. The agent that needs you is at the top, the next one is a key away (⌘J), and failed runs are in it too.
- A narrow sidebar (⌥⌘B, or View → Narrow Sidebar): one tile per project, a dot on each one that waits for you.
- See what an agent changed, where you read code. In the Code drawer, files an agent changed carry its logo, and lines added, changed or removed since it started are marked beside the line numbers. The breadcrumb names the function the caret is in; hovering a symbol shows a card with its signature, documentation, and Go to Definition / References.
- Review, sharper. Choose “since the agent started” or “since the last commit” with their counts, see which words changed in a line, read changes side by side (Split). Full screen, a worktree's commits are listed: pick one to see only its changes; Merge and Remove are at the foot.
- Grid tiles say what finished. When an agent finishes its turn, the tile says how many files it changed and how many lines it added and removed.
- The Browser panel shows the agent at work in a card with Take Over and Hand Back, and rings its page while it acts. Page dialogs, find in page and site questions are cards above the page.
- Settings → Agents: set environment variables for a preset (they are set each time it runs), see what each agent's hooks report and which version they were checked with. Appearance has a live preview of the terminal in your font, size and colours. ⌘F searches Settings.
- Every dialog asks the same way. Enter confirms the main button where it is marked ↵; a dialog that deletes or stops something never takes Enter, and Esc cancels.
- The first start finds your projects: git repositories in your usual folders (~/code, ~/Developments…) to add in one click, and the agents installed, with their versions.
Fixed
- A preset's environment variables are now set when it runs.
- Repositories in ~/code were listed twice on the first start on macOS.
- Searching projects in the sidebar: typing right after clicking the magnifier now goes to the search.
- The Browser panel's edge can be dragged while the panel is over the terminals.
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app
TernaryCode 0.1.35
The browser keeps what you are using, and agents open sites without asking.
New
- Agents open any site at once. No more Allow Once / Always / Block question before a site: agents in TernaryCode open what you ask for directly. Prefer the question? Turn on Ask before agents open a site in Settings → Browser (your lists of allowed sites still apply then).
- An agent uses the page you already have open. You opened YouTube and ask “play Perfect”: when a page of yours is already on that site and idle (no sound, no form being filled in), the agent works in it instead of opening a second one, and it stays your page. Tell it which tab to use (“use the YouTube tab”) and it uses that one. Agents get
browser_tabs: list the pages, pick one, open one of their own (three at most), close one. An agent playing sound hears when another page plays too, so two songs don't play over each other. - Pages that are busy don't sleep. A page out of view still sleeps after 10 minutes, but never while it plays sound or video, uses the camera, microphone or screen, has a form being filled in, waits on a dialog or a sign-in pop-up, or downloads. Music in a hidden panel no longer stops after 10 minutes. When memory runs low, idle pages sleep sooner (after a minute).
- A speaker on the tab of a page playing sound. Click it to mute the page; click again to let it play.
- Reopen Closed Page (⇧⌘T on macOS, Ctrl+Shift+Alt+T on Windows and Linux; File menu and command palette): the page closed last comes back.
- Agents' pages close when they're done. Closing an agent's terminal closes its pages too, unless one is in view or playing sound (that one stays, as yours). An agent's page asleep for an hour after its agent ended closes. Agents' pages whose terminal is gone are not brought back when TernaryCode starts. A new agent session in the same terminal hears that its page was left by an earlier one.
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app
TernaryCode 0.1.34
Agents can close the browser.
New
- An agent closes its page when you ask. “Close the browser”, “close that tab”: the agent's browser tools now have
browser_close, which closes its page (its tab in the Browser panel). With no other page left, the panel closes too; asked to close the browser itself, the agent also hides the panel, and your own pages in it keep running out of view (the Browser button shows them again). Until now an agent could only leave its page blank.
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app
TernaryCode 0.1.33
Antigravity CLI in place of Gemini CLI.
New
- Antigravity CLI. Google replaced Gemini CLI with Antigravity CLI (
agy): it is now one of the agents in Run Agent, with its logo, in place of Gemini CLI. Its status shows "Active" while it runs (TernaryCode adds no hooks to it yet); an image on the clipboard goes to it with ⌘V / Ctrl+V; "Skip permission prompts" (for a new worktree) starts it with--dangerously-skip-permissions. Not installed: Run Agent offers its installer (curl -fsSL https://antigravity.google/cli/install.sh | bash, orirm https://antigravity.google/cli/install.ps1 | iexon Windows). - A Gemini CLI preset you had edited stays, as one of your own presets (it can now be deleted); a
geminityped in a pane is still recognised.
Fixed
- Agents on Linux are recognised. A program started from a pane's shell was taken for the shell itself on Linux, so an agent there (Claude Code, Codex, OpenCode, Antigravity CLI) showed no name, logo or "Active" status unless its hooks said so. Its own process now names it, as on macOS and Windows.
- Settings → Agents said the browser tools come with Claude Code's Per launch on macOS only; they come on every system (since 0.1.31).
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app
TernaryCode 0.1.32
Codex starts from Run Agent on Windows.
Fixed
- Codex on Windows. Run Agent → Codex stopped at once with
Error: invalid type: string "{command=…}", expected struct RawMcpServerConfig in mcp_servers.ternarycode(and before 0.1.31 with the same error abouthooksornotify): Windows PowerShell drops the"inside the settings TernaryCode hands Codex for the run. They now have none (TOML strings in'…'), so Codex starts with its browser tools, its hooks (waiting and done in the sidebar) and the guide, in Windows PowerShell 5.1 and PowerShell 7 alike.
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app
TernaryCode 0.1.31
The Browser panel on Windows and Linux: pages show beside your terminals there too, and agents use them as on macOS.
New
- Pages in TernaryCode on Windows. The Browser panel shows pages with WebView2 (Microsoft Edge's engine, part of Windows 11 and of Windows 10 with Edge): server chips, Ctrl-clicked links, HTML files and programs that open a browser open the page beside the terminal, as on macOS. Sign-in pop-ups ("Continue with Google") open tied to the page and sign it in. Dialogs show as the bar above the page; downloads are listed; Ctrl+F finds in the page, Ctrl+= and Ctrl+− zoom it, Ctrl+L goes to its address, Ctrl+R reloads it; Inspect Element and Print… are in the page's ⋯ menu.
- Pages in TernaryCode on Linux. The same, with WebKitGTK, in an X11 window (under Wayland the app's window is an X11 one through XWayland, so pages can show in it; set
TERNARYCODE_WAYLAND=1to keep a Wayland window, and pages then open in your default browser). The page helper needs WebKitGTK 4.1 (libwebkit2gtk-4.1-0, which the .deb and .rpm recommend); without it pages open in your default browser as before. - Agents' browser tools on Windows and Linux. Claude Code, Codex and OpenCode get the browser tools on every system: they open, read and click pages, type, upload files from the project, answer dialogs and take screenshots, with real clicks and keys that reach frames of other sites. A site not on the project's list still asks you first.
xdg-open https://…typed in a terminal on Linux opens the page in TernaryCode's browser, asopendoes on macOS; programs that open a browser ($BROWSER) do too.
Fixed
- TernaryCode starts on every Windows. It needed the Visual C++ runtime (
VCRUNTIME140.dll), which a fresh Windows does not have: it would not open there at all. The runtime is now part of the program.
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app
TernaryCode 0.1.30
Agents use the browser as a person does.
New
- Real clicks and keys. An agent's clicks, keys, hovers and drags in the browser panel are
now real mouse and keyboard events, as if you made them. They reach into frames of other
sites (a card form, a captcha), open file choosers and pop-ups, and work in rich editors.
Your own typing in a terminal is not disturbed. - Agents can upload files (
browser_file_upload): they answer a page's file chooser with a
file from the project's folder or the Downloads folder (nothing else of yours). - More tools for agents: a click at a point of the page (
browser_mouse_click_xy, for frames
and canvases), typing into whatever has the focus (browser_keyboard_type), hovering
(browser_hover), dragging (browser_drag, including the page's own drag and drop), and
double clicks. A pop-up an agent's click opens to a site not on the project's list still asks
you first.
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app
TernaryCode 0.1.29
The browser panel does what a browser does: dialogs, camera and microphone, downloads, find, zoom and the Web Inspector.
Fixed
- Page dialogs show. A site's
alert(),confirm()andprompt()showed nothing before, and
confirm()answered "Cancel" at once, so buttons like "Remove this item?" never worked. Each
dialog now shows as a bar above its page (OK, Cancel, a field for a prompt; Enter and Esc).
Only that page waits; the rest of the app does not. Pop-up windows show theirs as a sheet. - Camera and microphone work. Sites could not use them at all (video calls, voice notes,
scanning a QR code). macOS now asks once for TernaryCode, and each site asks you first.
New
- Downloads are listed. A download goes to your Downloads folder as before, and now shows as a
chip in the page's toolbar: open the file, or show it in the Finder. - Find in page: ⌘F while a page has the keyboard (matches counted; Enter, ⇧Enter, Esc).
- Zoom: ⌘= and ⌘− while a page has the keyboard; the toolbar shows the zoom, and a click
resets it. - Web Inspector: Inspect Element in the page's ⋯ menu or its right-click menu (Safari's
Web Inspector). Print… is in the ⋯ menu too. - Agents: an agent is told when its click opens a dialog and answers it with the new
browser_handle_dialogtool, and hears where a download went.
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app
TernaryCode 0.1.28
Agents can sign in through pop-ups, and agents show their logos.
New
- Agents can go through sign-in pop-ups. When an agent clicks "Continue with Google" (or any
button that opens a pop-up), the pop-up now opens over the app just as it does for your own
click, tied to the page, and the agent's next steps act in it until it closes. A pop-up to a
site the agent may not open yet asks you first (Allow Once, Always, Block). Agents are told
never to type your passwords or one-time codes: they ask you to type them in the pop-up. - Agents show their logos. Run Agent, Settings → Agents and the Browser panel's page tabs
show the Claude, Codex (OpenAI), OpenCode and Gemini logos instead of two letters.
Install
macOS (Apple Silicon and Intel): run this in Terminal, or download the .dmg below.
curl -fsSL https://raw.githubusercontent.com/ilhamnadhif/ternarycode/main/scripts/install.sh | bashWindows: run TernaryCode-<version>-windows-x64-setup.exe (no administrator rights needed), or
unpack the portable .zip.
Linux: the .deb (Debian, Ubuntu, Mint), the .rpm (Fedora, RHEL, openSUSE), or the
.AppImage and the .tar.gz for any distribution, for x86_64 and aarch64 (arm64).
Installed copies update themselves from the app (the .deb and .rpm through a new package).
macOS says “TernaryCode” Not Opened / “Apple could not verify…”? This build is not notarized by
Apple yet, so macOS blocks a .dmg or app downloaded with a browser. Since macOS 15,
right-click → Open no longer gets past it. Do one of these:
- Use the one-line installer above. Nothing downloaded with
curlis blocked. - Allow it once: click Done in the warning, open System Settings → Privacy & Security,
scroll down to Security, and click Open Anyway next to “TernaryCode was blocked…”. Confirm with
your password, then open it again. - Or in Terminal, after dragging the app to Applications:
xattr -dr com.apple.quarantine /Applications/TernaryCode.app