Repository navigation
DigiCosm 0.1 (pre-release)
Pre-releaseA pre-release. It runs on a Digitone mk1, and was checked in digikit's emulator on OS 1.43 and 1.44.
DigiCosm is an effects engine for the Digitone mk1's two audio inputs, after the Hologram Microcosm, as an elekloader mod. Hold a track key and pick DIGICOSM in the Mod Menu: while its page is open it owns the audio engine (the synths are silent) and the screen, and NO gives both back. It is not affiliated with Hologram and uses none of its code.
- Eleven engines, four variations each: MOSAIC, SEQ, GLIDE, HAZE, TUNNEL, STRUM, BLOCKS, INTERRUPT, ARP, PATTERN, WARP (trig keys 1-11, variations on 13-16), in time with the Digitone's tempo.
- A page drawn like the Digitone's own, in its fonts: 1 Effect (Activity, Repeats, Shape, Filter, Mix, Time, Space, Loop Level), 2 Shift (gain, pitch modulation, resonance, effect volume, loop speed, room, fade), 3 Looper (HOLD, REV and BYP switches; LOOP, STOP, UNDO, CLR). LEFT/RIGHT or PAGE between them.
- A 60-second stereo looper with an overdub layer and undo; quantize, burst, pre/post-FX, looper only. T1 and T2 are its two footswitches.
- 16 presets saved with the project, and the Microcosm's MIDI CC map on the Digitone's auto channel.
Install
DigiCosm needs core-dn1 3.2 and elekloader from its main branch: core-dn1 3.2 and the Digitone profile's bulk area (where DigiCosm keeps its 26 MB of buffers) are on elekloader's main branch, in no app release yet. The 0.4.0 app refuses DigiCosm.
Take the two files for your OS version:
| OS | files |
|---|---|
| 1.43 | core-dn1-3.2.elemod, digicosm-0.1.elemod |
| 1.44 | core-dn1-3.2-os1.44.elemod, digicosm-0.1-os1.44.elemod |
python -m elekloader.patch --stock Digitone_and_Digitone_Keys_OS1.44.syx \
--mod core-dn1-3.2-os1.44.elemod --mod digicosm-0.1-os1.44.elemod \
--out Digitone_OS1.44-digicosm.syx --version DC01Then flash the .syx with Elektron Transfer. The README has the steps and how to get back to stock (the stock OS file always restores the unit).
Checked
On a Digitone mk1: it runs and works. In digikit's emulator, OS 1.43 and 1.44:
- The synths go silent while DigiCosm is open and are back at once after NO, also with PLAY pressed meanwhile.
- Every engine at every variation with plucked notes on the inputs; the whole render takes 30-55% of a block on the emulator's cycle clock, never more than stock's 56.6%.
- The looper (record, play, overdub, undo, reverse, stop, erase), Hold, the presets, the three pages, the switches and the looper boxes, SETUP.
- The MIDI CC map, 40 checks on each OS version.
- core-dn1 3.2 alone passes the firmware check against stock.
Not yet: a run on a Digitone Keys (only its code path was checked). Loops are not saved (the Digitone's +Drive has no files a mod could write) and program changes are not mapped.
Files
Built from elekloader's main at 574d7b4 (mods/digicosm-dn1 and mods/core-dn1); this repository's sources build the same two DigiCosm files.
| file | sha256 |
|---|---|
digicosm-0.1.elemod |
bac1184caf36f939e66891faae42d9187ac86efa1e5f72ce7f72fd4199fbb04e |
digicosm-0.1-os1.44.elemod |
012028c0b35447a45aaf7615a9cedb9e18f374a53ffa363b678ab4f1bf039d8b |
core-dn1-3.2.elemod |
999834c7fd2c62c65a05acfde3c815530cc7447898297e145540c84e545acfd3 |
core-dn1-3.2-os1.44.elemod |
f2c6a28c3ff8c65d961afc78e87961b9378988d2d9b8b482f7033bc4362d08f6 |