Skip to content

ChromIQ v4.3.39

Choose a tag to compare

@github-actions github-actions released this 15 Nov 09:58
· 153 commits to master since this release

For everyone updating from 4.3.38: fixes for measuring with the i1Pro family and the ColorMunki, and for the two X-Rite beta options. The most important fix: on a chart in fixed order (not randomised), ChromIQ's instrument reader could save a strip back to front because it looked a little more like another strip turned round, on every attempt. That is fixed. New are a “Turn this strip round” button, an explanation when a strip is refused twice as “Reading is inconsistent”, notes about patches that are too short or charts without spacers, and, behind the i1iO beta option, the import of a measurement made with i1Profiler's “Measure Chart”. Your charts, measurements and profiles do not change.

Fixed

  • A strip on a chart in fixed order is no longer saved back to front because it looks like another strip turned round. When ChromIQ's instrument reader decided which way round to save a strip, it went by whichever row of the chart fitted best, even though it saved the strip under its own row. On a tester's chart, strip 9 read forwards looked slightly more like strip 13 read backwards, so strip 9 was saved back to front on every attempt, and “Re-measure this strip” only went round again. In 4.3.38 this could save a strip's readings under the wrong patches. Now a strip saved under its own row takes that row's own direction whenever that row shows its direction clearly. Randomised charts, strips that were read correctly and “Bidirectional disabled (-B)” work exactly as before.
    • Worth knowing: on a row whose colours are too like another row's to tell, a strip you swiped by mistake (another strip read while ChromIQ waited for this one) with warnings suppressed (-S, ChromIQ's default) is now saved in that row's own direction without a question. 4.3.38 sometimes asked “filed back to front?” about it by accident. “Was a strip read twice?” still catches it when the right strip is read.
  • i1iSis charts (beta): the notes band shows the chart's real numbers. It printed a sample patch count (560) and counted the rows as strips. It now takes the patch count, the strips on the page and the patches per strip from the finished layout, in the same terms as the Create Chart panel.
  • i1iSis charts (beta): “Show row indicators” now prints the row numbers. On the usual A4 chart there was 0.4 mm too little room, so they were left off. They are now set smaller before they are left off, and they sit inside the dashed outline. When there is still no room, the log and a note in the “i1iSis chart (Beta)” group say so, and what makes room.
  • i1iSis charts (beta): “Strip letters place” is greyed while “Show strip indicators” is off, because it only chooses where the letters go. Its help says which box switches them on.
  • i1iSis charts (beta): the Guided summary says “i1iSis”, not the internal code XRISIS.
  • i1iO charts (beta): the chart notes name the instrument “i1iO”, not the internal code IO2.
  • Windows that ask where a chart or patch set should go no longer let their buttons overlap. In German, “Lieber als neuen Lauf bauen” ran under “Nur das Chart ersetzen”. The buttons now stay side by side in one row when they fit, and otherwise sit side by side in as few rows as fit, so none overlaps and every button stays on screen, also on a small laptop.
  • The row and column check of the chart scan window now works on charts with numbered strips and lettered patches (such as “12I”). It was skipped on them without a word.

New

  • Import of an i1Profiler “Measure Chart” measurement for i1iO charts (beta, with “X-Rite i1iO support” on). Measure a ChromIQ i1iO sheet with i1Profiler's “Measure Chart”, then use Import Measurement on the Measure tab. ChromIQ puts each reading on the patch at its place in i1Profiler's grid, and before it files anything it checks the grid, the number of readings and, from the colours, that the sheet lay the right way and that the three corner patches were aimed at correctly. A measurement that does not fit is refused with the reason and how to measure again. When you press Start on an i1iO chart, the Measure tab explains the i1Profiler steps.
    • Its limits: it rests on one real file from a tester, and it handles one page at a time. On very small or very uniform charts the colours cannot prove that the corners were aimed at correctly. On a chart of two strips or fewer (such as the two-strip verification chart) the measurement is filed and ChromIQ then says plainly, in the log and in its window, that it could not check the aim. On a chart whose colours cannot tell (ramps, colours in order, many nearly identical colours) ChromIQ asks you first, and after filing says the same. Either way it tells you how to be sure: measure again aiming carefully at the three corner patches, or compare a few patches by eye in the preview.
  • “Turn this strip round” in the window that says a strip was probably saved back to front, when the strip did not also slip: ChromIQ turns that strip's readings round and saves them, only when you click it.
  • When the same strip is refused a second time with “Reading is inconsistent”, ChromIQ explains what usually causes it (a very dark patch straight next to a very light one, or patches shorter than the instrument likes) and what helps.
  • A note when a chart's patches are shorter than ArgyllCMS's minimum for your instrument (10 mm along the strip for the i1Pro family, 16 mm for the i1Pro 3 Plus, 14 mm for the ColorMunki), in Create Chart and once in the Measure log. Nothing is refused or greyed. The ColorMunki's Extra-high density mode gets its own words.
    • Worth knowing: the default Guided chart for the i1Pro family on A4 (484 patches, 9.5 mm long) shows this note, and so do other layouts ChromIQ sizes by itself (small papers, and A4 or Letter with about 420 patches or more, 8.1 to 9.5 mm). Those patches really are a little shorter than ArgyllCMS's 10 mm. When ChromIQ chose the size itself and the patches are longer than 8 mm, the note is a calm line in the log, not a red warning: most strips read fine, and if strips are refused or read wrongly, choose fewer patches per page. When you set the patch size yourself, or the patches are 8 mm or shorter (where testers really had misreads), it stays a warning.
  • A note when a chart without spacers has neighbouring patches that cannot be told apart (for example two whites next to each other along a strip), in Create Chart, with what helps. Nothing is refused or moved.
  • “Keep very dark patches away from very light ones” (Create Chart, under Randomisation; off by default): on a chart in fixed order without spacers it swaps as few patches as it can, so that no very dark patch sits straight next to a very light one along a strip. The log names every patch that moved. Whether it means fewer refused strips has not been measured on real prints yet, which is why it is off by default.
  • Guided asks before laying out a run's own patch set on a different number of pages than you chose. A run whose patch set you made, edited or loaded yourself keeps that set when you press Generate in Guided. When that set takes more or fewer pages than “Number of pages” asks for, ChromIQ now asks, with three answers: make a new patch set that fills the pages you chose; keep your own patches and lay them out again (on a randomised chart their order is shuffled again, so you get a new chart to print); or do not generate at all, which changes nothing (the default, and what Escape and Return do). If your chart is already printed, choose “Do not generate” and measure the sheets you have. Before, it laid out your own set on however many pages it needed without a word.

Changed

  • The measurement condition is always written into a measurement, also when “Spectral filter type (-F)” is off: M0 for the i1Pro 3, and for the i1Pro or i1Pro 2 when it has no UV-cut filter. Nothing is written where the condition cannot be known. The ruler diagnostics file (beta) records it too, together with which question each strip got and what you answered.
  • Resuming or merging measurements taken under different measurement conditions is now refused in cases 4.3.38 allowed or asked about. A measurement taken with -F off now says M0, so ChromIQ knows it differs from an M1 or M2 measurement. Continuing it with -F set to another condition is refused, and the window says to switch -F off again as it was when you started; merging or averaging it with an M1 or M2 measurement is refused. Readings taken under different light do not belong in one file, because optical brighteners read differently under each. Measurements made before 4.3.39 record no condition and are treated exactly as before.
  • i1iSis charts (beta): nothing is printed twice on a sheet with the notes band. The name line at the top leaves out what the notes band on that page already shows (the ChromIQ logo, the chart's name, the page number). The Create Chart log names where the strip letters and the row numbers go.
  • i1iSis charts (beta): importing an i1iSis measurement also checks its colours. A measurement whose colours clearly do not fit the chart (the sheet fed the wrong way round, or another printout) is refused with the reason; when the colours cannot tell, it is filed as before and the log says so.

Honest limits

  • No real i1iSis has read a ChromIQ sheet yet. If you own one, please try it and tell us.
  • The i1iO “Measure Chart” import rests on one real file and cannot check the aim on very small or very uniform charts (see above).

Installation (Linux, beta): Download the tarball for your architecture (x86_64 for most desktops/laptops, aarch64 for ARM systems like Raspberry Pi 4/5). Extract with tar xzf ChromIQ-Linux-*.tar.gz, then run ./ChromIQ/ChromIQ. Requires ArgyllCMS — install via your package manager (sudo apt install argyll) or from argyllcms.com/downloadlinux.html.


☕ ChromIQ is free and always will be — if it saves you time or ink, a coffee is a kind way to say thanks. Completely optional, and the app stays fully featured either way.

Support ChromIQ on Ko-fi