Skip to content

Releases

MPC Sample draw handler addin v1.0.1

Choose a tag to compare

Owns the MPC Sample's screen for plugins that draw on it: the last plugin to ask gets the whole screen until it gives it back.

Requirements

  • A Gen2 MPC OS standalone device (aarch64: Live III, One G2, Key(s) G2). The installer refuses anything else.
  • Root shell access (SSH) to the device. Stock MPC OS doesn't offer this; you need a modded unit.
  • Installing addins this way is unofficial: back up first, use at your own risk.

Install

  1. Unzip, then copy the whole folder to the device, e.g. scp -r MPC-Sample-draw-handler-addin-1.0.1 root@<device-ip>:/tmp/
  2. Run it: ssh root@<device-ip> sh /tmp/MPC-Sample-draw-handler-addin-1.0.1/install.sh

The installer copies the addin into /data/mpc-addins/sample-draw-handler/, adds mpc_sample_draw_handler.so to the LD_PRELOAD list of MPC's service
and restarts MPC (save your project first). The list is extended, never replaced: other addins and the
libraries the firmware preloads stay. Where no writable file sets the list (the unit is on the read-only root), one
drop-in shared by every addin sets it, /etc/systemd/system/<service>.service.d/90-mpc-addins.conf. Re-run the
installer after a firmware update. -y skips the question, -n leaves the restart to you.

Settings are in /data/mpc-addins/sample-draw-handler/mpc_sample_draw_handler.conf; an upgrade keeps your edits.

On the MPC Sample it now owns the screen for plugins and addins that draw on it; a long hold of PAD FX cycles their pages. Control (on the device): http://127.0.0.1:6740/status, /test?on=1 shows a test pattern, /release gives MPC its screen back. From a computer: ssh -L 6740:127.0.0.1:6740 root@.

Uninstalling and the file list are in INSTALL.md inside the zip.

Changes in 1.0.1

  • After a page gave the screen back, parts of it could stay on the glass under MPC's waveform. MPC double-buffers its
    screen and redraws only what changed, so each framebuffer now keeps its own copy of MPC's pixels (seen on an MPC Sample,
    2026-11-06).

Built from c7f3960 with mpc-vst-plugins (tools/release-aarch64.sh). Tested on an MPC Sample (firmware 1.3.0.12) on 2026-11-06.

MPC Sample draw handler addin v1.0.0

Choose a tag to compare

Owns the MPC Sample's screen for plugins that draw on it: the last plugin to ask gets the whole screen until it gives it back.

Requirements

  • A Gen2 MPC OS standalone device (aarch64: Live III, One G2, Key(s) G2). The installer refuses anything else.
  • Root shell access (SSH) to the device. Stock MPC OS doesn't offer this; you need a modded unit.
  • Installing addins this way is unofficial: back up first, use at your own risk.

Install

  1. Unzip, then copy the whole folder to the device, e.g. scp -r MPC-Sample-draw-handler-addin-1.0.0 root@<device-ip>:/tmp/
  2. Run it: ssh root@<device-ip> sh /tmp/MPC-Sample-draw-handler-addin-1.0.0/install.sh

The installer copies the addin into /data/mpc-addins/sample-draw-handler/, adds mpc_sample_draw_handler.so to the LD_PRELOAD list of MPC's service
and restarts MPC (save your project first). The list is extended, never replaced: other addins and the
libraries the firmware preloads stay. Where no writable file sets the list (the unit is on the read-only root), one
drop-in shared by every addin sets it, /etc/systemd/system/<service>.service.d/90-mpc-addins.conf. Re-run the
installer after a firmware update. -y skips the question, -n leaves the restart to you.

Settings are in /data/mpc-addins/sample-draw-handler/mpc_sample_draw_handler.conf; an upgrade keeps your edits.

On the MPC Sample it now owns the screen for plugins and addins that draw on it; a long hold of PAD FX cycles their pages. Control (on the device): http://127.0.0.1:6740/status, /test?on=1 shows a test pattern, /release gives MPC its screen back. From a computer: ssh -L 6740:127.0.0.1:6740 root@.

Uninstalling and the file list are in INSTALL.md inside the zip.


Built from fa9cb24 with mpc-vst-plugins (tools/release-aarch64.sh). The same code as 0.6.0, tested on an MPC Sample on 2026-11-05.

MPC Sample draw handler addin v0.6.0

Pre-release

Choose a tag to compare

Owns the MPC Sample's screen for plugins that draw on it: the last plugin to ask gets the whole screen until it gives it back.

Requirements

  • A Gen2 MPC OS standalone device (aarch64: Live III, One G2, Key(s) G2). The installer refuses anything else.
  • Root shell access (SSH) to the device. Stock MPC OS doesn't offer this; you need a modded unit.
  • Installing addins this way is unofficial: back up first, use at your own risk.

Install

  1. Unzip, then copy the whole folder to the device, e.g. scp -r MPC-Sample-draw-handler-addin-0.6.0 root@<device-ip>:/tmp/
  2. Run it: ssh root@<device-ip> sh /tmp/MPC-Sample-draw-handler-addin-0.6.0/install.sh

The installer copies the addin into /data/mpc-addins/sample-draw-handler/, adds mpc_sample_draw_handler.so to the LD_PRELOAD list of MPC's service
and restarts MPC (save your project first). The list is extended, never replaced: other addins and the
libraries the firmware preloads stay. Where no writable file sets the list (the unit is on the read-only root), one
drop-in shared by every addin sets it, /etc/systemd/system/<service>.service.d/90-mpc-addins.conf. Re-run the
installer after a firmware update. -y skips the question, -n leaves the restart to you.

Settings are in /data/mpc-addins/sample-draw-handler/mpc_sample_draw_handler.conf; an upgrade keeps your edits.

On the MPC Sample it now owns the screen for plugins and addins that draw on it; a long hold of PAD FX cycles their pages. Control (on the device): http://127.0.0.1:6740/status, /test?on=1 shows a test pattern, /release gives MPC its screen back. From a computer: ssh -L 6740:127.0.0.1:6740 root@.

Uninstalling and the file list are in INSTALL.md inside the zip.


Built from 3db0a76 with mpc-vst-plugins@9aab04f (tools/release-aarch64.sh). Tested on an MPC Sample on 2026-11-05.