Repository navigation
Releases
TetherInvert 0.1.1
A small release that makes problems easier to check and to report.
What's new
- Run Doctor from the window. Help › Run Doctor… checks what is installed and connected, takes one test shot without changing any camera setting, and says whether the file decodes. You no longer need the command line, and you don't have to close the window first: the doctor uses the camera and light the window already holds.
- Copy report puts the whole report on the clipboard, together with the details from About TetherInvert, ready to paste into an issue.
- Show test shot opens the folder that keeps the test shot, so you can attach a RAW file that doesn't decode.
- The manual has moved. Help › TetherInvert Manual now opens the manual at tetherinvert.com/manual.
tetherinvert doctor on the command line still works as before.
Downloads
| File | For |
|---|---|
TetherInvert-0.1.1-macos-arm64.dmg |
macOS on Apple silicon |
TetherInvert-0.1.1-linux-x86_64.tar.gz |
Linux on Intel and AMD: Ubuntu 22.04, Debian 12, Fedora 36 or newer |
TetherInvert-0.1.1-linux-aarch64.tar.gz |
Linux on 64-bit ARM: Ubuntu 24.04, Debian 13, Fedora 40 or newer. On a Raspberry Pi, use the 64-bit Raspberry Pi OS based on Debian 13 |
- macOS: drag TetherInvert into Applications and replace the old version. The app still isn't signed with an Apple Developer ID, so macOS blocks it the first time you open it. Choose Open Anyway in System Settings → Privacy & Security, or run
xattr -dr com.apple.quarantine /Applications/TetherInvert.app. - Linux: unpack the tarball and run
TetherInvert/install.sh.
The Install page has the details.
Reporting a problem
Open an issue with the doctor's report (Help › Run Doctor…, then Copy report) and a description of your rig. Reporting a problem lists what else helps.
Full Changelog: v0.1.0...v0.1.1
TetherInvert 0.1.0
The first release of TetherInvert: tethered film scanning and conversion with a digital camera on a copy stand.
TetherInvert controls the camera and a Scanlight, or a light you set by hand. It shoots each negative under red, green and blue light one after the other and writes calibrated 16-bit TIFFs. Then you can finish the frames in Lightroom Classic or any editor, or develop and print them in TetherInvert itself.
What it does
- Calibration once per film stock. The film base is exposed to the right in red, green and blue, so the film itself sets the white balance.
- Fast scanning. Press the space bar for the next frame. A 36-frame roll takes about 11 minutes to scan, and under 25 minutes from the first scan to a contact sheet with every frame developed.
- Even light. A flat field, taken without film once per session, corrects uneven light.
- A flat master per frame. Each frame is saved as a flat positive with nothing clipped and no curve applied.
- Developing and printing, if you want them. Corrections modelled on the Fujifilm Frontier SP-3000's controls (density, colour, contrast, saturation, tone), with prints written in one batch.
- Film metadata in every file. Camera, lens, film stock, EI, developer, dates, notes and keywords. The copy-stand camera is recorded separately, so Lightroom shows the camera you shot the film with.
- A contact sheet of the roll, as PDF and PNG.
- A Lightroom Classic plug-in (macOS only). Its hot folder imports files as they're written, and it adds the film and scan fields to the Metadata panel.
- Colour negatives in three shots or one, and black and white under white light.
Downloads
| File | For |
|---|---|
TetherInvert-0.1.0-macos-arm64.dmg |
macOS on Apple silicon |
TetherInvert-0.1.0-linux-x86_64.tar.gz |
Linux on Intel and AMD: Ubuntu 22.04, Debian 12, Fedora 36 or newer |
TetherInvert-0.1.0-linux-aarch64.tar.gz |
Linux on 64-bit ARM: Ubuntu 24.04, Debian 13, Fedora 40 or newer. On a Raspberry Pi, use the 64-bit Raspberry Pi OS based on Debian 13 |
Each download includes its own Python and libraries.
- macOS: drag TetherInvert into Applications. The app isn't signed with an Apple Developer ID yet, so macOS blocks it the first time you open it. Choose Open Anyway in System Settings → Privacy & Security, or run
xattr -dr com.apple.quarantine /Applications/TetherInvert.app. - Linux: unpack the tarball and run
TetherInvert/install.sh. To use the camera and the Scanlight, you may need your distribution's libgphoto2 package and membership of thedialoutgroup.
The Install page has the details. There's no Windows version, because libgphoto2 has no Windows build.
Before you start
You need a camera that libgphoto2 can control, shooting RAW, and a light. TetherInvert is a personal project in active development, so things can change and break between versions.
Start with the manual. If something goes wrong, open an issue. Include the output of tetherinvert doctor and describe your rig. Reporting a problem lists what else helps.
Licensed under GPL-3.0-or-later.
Full Changelog: https://github.com/janpfischer/tetherinvert/commits/v0.1.0