Skip to content

Releases

Atl-Atl 0.8

Choose a tag to compare

@github-actions github-actions released this 15 Nov 17:23
41be8a3

Atl-Atl: The Atltuner 0.8

This release replaces the screen with the pixel UI and adds battery charge.

What is new

  • A pixel UI. assets/atl-atl-ui.png is the at-rest screen. assets/atl-atl-ui-on.png supplies the active
    slices for LATCH, MASK, PLAY, LOOP, REC, sample presence, USB, charging and GLO. The app overlays only the slice
    whose state is on.
  • The BPM light pulses on the beat. The BPM number stays in Geist Sans; every other value is Geist Mono.
  • Battery charge. The battery icon gets a black fill inset by 3 px; 0% is the leftmost pixel column and 100% is
    the full inner width. The alternate battery slice is shown while USB power is present.
  • Centred text. Every live value is vertically and horizontally centred in the slice boxes from
    assets/atl-atl-ui.json. Inactive text is #cbdbfc; active text is #000000.
  • The sample panel shows its length, the computed loop note length, and the recorded root note.

The package is atlatl-0.8.fwsc for the 48 kHz codec. The firmware identity stays FM-1_922.


Atl-Atl: The Atltuner 0.8 for the M-VAVE FM-1: the computer's audio over USB, tuned to the key held on the keyboard, out of the FM-1's speaker or headphones and back to the computer as a USB audio input.

Install with the command-line installer: python3 tools/fm1_install.py atlatl-0.8.fwsc.

atlatl-0.8.fwsc is the package (48 kHz); SHA256SUMS lists its SHA-256. The package holds three JieLi AC79 SDK files (Apache-2.0); LICENSE, LICENSING.md and LICENSES.zip carry every licence (GPL-3.0-only; Geist fonts, OFL 1.1; JieLi SDK files, Apache-2.0). The complete source of this release is the tag v0.8.

Installing custom firmware is at your own risk. Atl-Atl is provided as is, without any warranty.

Full Changelog: v0.7...v0.8

Atl-Atl 0.7

Choose a tag to compare

@github-actions github-actions released this 15 Nov 15:16
ed00197

Atl-Atl: The Atltuner 0.7

This release makes the sample playable from the keys and switches the large type to Geist Sans.

What is new

  • GLO is play-note mode. With GLO lit, every physical key or USB-MIDI note-on restarts the recorded sample and
    retunes it to that note. It plays once; the pitch stays at the triggered note after the key is released.
  • GLO and SEQ are exclusive. Turning on GLO turns LOOP off; turning LOOP on turns GLO off. The mode is saved
    with SAVE.
  • The target note and BPM use Geist Sans. The large values are now sans-serif; Geist Mono remains the small UI
    font. The unused Geist Serif face is gone.

The package is atlatl-0.7.fwsc for the 48 kHz codec. The firmware identity stays FM-1_922.


Atl-Atl: The Atltuner 0.7 for the M-VAVE FM-1: the computer's audio over USB, tuned to the key held on the keyboard, out of the FM-1's speaker or headphones and back to the computer as a USB audio input.

Install with the command-line installer: python3 tools/fm1_install.py atlatl-0.7.fwsc.

atlatl-0.7.fwsc is the package (48 kHz); SHA256SUMS lists its SHA-256. The package holds three JieLi AC79 SDK files (Apache-2.0); LICENSE, LICENSING.md and LICENSES.zip carry every licence (GPL-3.0-only; Geist fonts, OFL 1.1; JieLi SDK files, Apache-2.0). The complete source of this release is the tag v0.7.

Installing custom firmware is at your own risk. Atl-Atl is provided as is, without any warranty.

Full Changelog: v0.6...v0.7

Atl-Atl 0.6

Choose a tag to compare

@github-actions github-actions released this 15 Nov 15:07
0a31628

Atl-Atl: The Atltuner 0.6

This release turns the sample into a playable one-note instrument.

What is new

  • The sample is recorded unaltered. REC captures the USB input before the tuner.
  • The keys pitch the sample. The recorded note becomes the sample's root. Playing the sample while holding a key
    shifts it to that note, so one recorded note can be played up and down the keyboard. The sample still mixes with
    the live input.
  • Geist Serif now covers the target note and the BPM number. Both use the large serif numerals and note letters;
    Geist Mono remains the small UI font. The leftover Terminus font files are gone.
  • Antialiasing is blended over the real background, not just over black.

The package is atlatl-0.6.fwsc for the 48 kHz codec. The firmware identity stays FM-1_922.


Atl-Atl: The Atltuner 0.6 for the M-VAVE FM-1: the computer's audio over USB, tuned to the key held on the keyboard, out of the FM-1's speaker or headphones and back to the computer as a USB audio input.

Install with the command-line installer: python3 tools/fm1_install.py atlatl-0.6.fwsc.

atlatl-0.6.fwsc is the package (48 kHz); SHA256SUMS lists its SHA-256. The package holds three JieLi AC79 SDK files (Apache-2.0); LICENSE, LICENSING.md and LICENSES.zip carry every licence (GPL-3.0-only; Geist fonts, OFL 1.1; JieLi SDK files, Apache-2.0). The complete source of this release is the tag v0.6.

Installing custom firmware is at your own risk. Atl-Atl is provided as is, without any warranty.

Full Changelog: v0.5...v0.6

Atl-Atl 0.5

Choose a tag to compare

@github-actions github-actions released this 15 Nov 15:02
730fbdc

Atl-Atl: The Atltuner 0.5

This release changes the screen's type. The sound engine is unchanged.

What is new

  • Geist Mono is used for the small text: notes, pitch, sample, values and labels. Only printable ASCII is
    stored, since the UI no longer needs umlauts or other extended Latin characters.
  • Geist Serif is used only for the BPM number. Only its ten numerals are stored, so the large font is small.
  • Real antialiasing. The font data has 16 coverage levels, and the renderer now blends those levels over the
    actual background instead of assuming black. Text stays smooth on the light knob boxes and the note gradient.

The fonts are by Vercel, under the SIL Open Font License 1.1; the licence is in LICENSES/OFL-Geist.txt.

The package is atlatl-0.5.fwsc for the 48 kHz codec. The firmware identity stays FM-1_922.


Atl-Atl: The Atltuner 0.5 for the M-VAVE FM-1: the computer's audio over USB, tuned to the key held on the keyboard, out of the FM-1's speaker or headphones and back to the computer as a USB audio input.

Install with the command-line installer: python3 tools/fm1_install.py atlatl-0.5.fwsc.

atlatl-0.5.fwsc is the package (48 kHz); SHA256SUMS lists its SHA-256. The package holds three JieLi AC79 SDK files (Apache-2.0); LICENSE, LICENSING.md and LICENSES.zip carry every licence (GPL-3.0-only; Geist fonts, OFL 1.1; JieLi SDK files, Apache-2.0). The complete source of this release is the tag v0.5.

Installing custom firmware is at your own risk. Atl-Atl is provided as is, without any warranty.

Full Changelog: v0.4...v0.5

Atl-Atl 0.4

Choose a tag to compare

@github-actions github-actions released this 15 Nov 01:20
086d5ed

Atl-Atl: The Atltuner 0.4

This is a small fix over 0.3.

What changed

  • Turning FX latch off now releases the last note. Before, the FM-1 kept tuning to the old note after the latch
    was switched off. Now it goes back to the keys that are still held, or to the clean dry signal if none are held.
  • Latch and ARP off means forward. With both off, the computer's audio passes through without the old tuner
    target keeping it shifted.

The sound engine and package identity are unchanged. The package is atlatl-0.4.fwsc for the 48 kHz codec.


Atl-Atl: The Atltuner 0.4 for the M-VAVE FM-1: the computer's audio over USB, tuned to the key held on the keyboard, out of the FM-1's speaker or headphones and back to the computer as a USB audio input.

Install with the command-line installer: python3 tools/fm1_install.py atlatl-0.4.fwsc.

atlatl-0.4.fwsc is the package (48 kHz); SHA256SUMS lists its SHA-256. The package holds three JieLi AC79 SDK files (Apache-2.0); LICENSE, LICENSING.md and LICENSES.zip carry every licence (GPL-3.0-only; Terminus font, OFL 1.1; JieLi SDK files, Apache-2.0). The complete source of this release is the tag v0.4.

Installing custom firmware is at your own risk. Atl-Atl is provided as is, without any warranty.

Full Changelog: v0.3...v0.4

Atl-Atl 0.3

Choose a tag to compare

@github-actions github-actions released this 15 Nov 00:36
ded3135

Atl-Atl: The Atltuner 0.3

This release gives Atl-Atl its new screen, built from the design in assets/ui.svg. The sound engine is the same as
0.2.

What is new

  • A new look. The screen is drawn from a 240 × 240 image: the big note box, BPM area, sample area, four control
    boxes, recording light, loop/once signs, mask sign and latch light.
  • The controls show their values. Speed, mix, correction and octave are under their labels.
  • The note box shows the note you are tuning to and the pitch the FM-1 hears.
  • The tempo sign beats. The BPM label and dot are white when idle, and they switch between green and white on
    each beat while a sample plays or MIDI clock arrives.
  • Sample and tempo text sit in their boxes with clear labels. The sample shows its length and loop division.
  • The mode row has once, loop and mask signs, and the latch light is in the top corner.

The package is atlatl-0.3.fwsc for the 48 kHz codec. The firmware identity stays FM-1_922.


Atl-Atl: The Atltuner 0.3 for the M-VAVE FM-1: the computer's audio over USB, tuned to the key held on the keyboard, out of the FM-1's speaker or headphones and back to the computer as a USB audio input.

Install with the command-line installer: python3 tools/fm1_install.py atlatl-0.3.fwsc.

atlatl-0.3.fwsc is the package (48 kHz); SHA256SUMS lists its SHA-256. The package holds three JieLi AC79 SDK files (Apache-2.0); LICENSE, LICENSING.md and LICENSES.zip carry every licence (GPL-3.0-only; Terminus font, OFL 1.1; JieLi SDK files, Apache-2.0). The complete source of this release is the tag v0.3.

Installing custom firmware is at your own risk. Atl-Atl is provided as is, without any warranty.

Full Changelog: v0.2...v0.3

Atl-Atl 0.2

Choose a tag to compare

@github-actions github-actions released this 14 Nov 22:37
1f1168e

Atl-Atl: The Atltuner 0.2

This release adds a sampler and makes tempo, the ARP mask, and MIDI keys work better. These are the changes since
release 0.1.

What is new

  • Record a sound. Hold REC to record up to 3 seconds of the computer's audio. The FM-1 keeps playing while
    it records. Silence at the start and end of the sample is cut off.
  • Play it back. Press PLAY to play the sample once. Press SEQ to loop it. The loop length follows the
    tempo, so it stays in time. The sample plays together with the live tuned sound.
  • Set the tempo. Turn SELECT to set 30–300 BPM. If the computer sends MIDI clock, the FM-1 follows that
    clock instead and shows CLK on the screen.
  • Quiet when no key is held. Turn on ARP to mute the output until a key is held. FX keeps the note and
    the mask on after you let go.
  • MIDI keys now act like the FM-1 keys. Hold more than one MIDI note: when you let one go, the FM-1 uses another
    note that is still held. MIDI note 0 works too. The ARP mask follows MIDI keys.
  • New screen rows. BPM, SAMPLE and MODE show the tempo, the sample length, and whether the sample plays
    once or loops.
  • Saved settings. Loop, mask and tempo are saved with SAVE.
  • A new test. The host test checks recording, silence trimming, sample playback, MIDI held notes and the ARP
    mask.

The package is atlatl-0.2.fwsc for the 48 kHz codec. The firmware identity stays FM-1_922.


Atl-Atl: The Atltuner 0.2 for the M-VAVE FM-1: the computer's audio over USB, tuned to the key held on the keyboard, out of the FM-1's speaker or headphones and back to the computer as a USB audio input.

Install with the command-line installer: python3 tools/fm1_install.py atlatl-0.2.fwsc.

atlatl-0.2.fwsc is the package (48 kHz); SHA256SUMS lists its SHA-256. The package holds three JieLi AC79 SDK files (Apache-2.0); LICENSE, LICENSING.md and LICENSES.zip carry every licence (GPL-3.0-only; Terminus font, OFL 1.1; JieLi SDK files, Apache-2.0). The complete source of this release is the tag v0.2.

Installing custom firmware is at your own risk. Atl-Atl is provided as is, without any warranty.

Full Changelog: v0.1...v0.2

Atl-Atl 0.1

Choose a tag to compare

@github-actions github-actions released this 14 Nov 19:25
a80dfe8

Atl-Atl: The Atltuner 0.1

The first Atl-Atl release. The FM-1 is a USB audio sink and a key-targeted autotuner:

  • hold a key to set the target note; the computer's audio is tuned to it and comes out of the speaker/headphones;
  • KNOB1 SPEED, KNOB2 MIX, KNOB3 CORRECT, KNOB4 OCT; FX latches, EDIT toggles auto/fixed octave, SAVE stores;
  • the USB sink is FM1_AudioBase's tested 48 kHz path, resampled to the codec's clock; the tuner DSP and UI came
    from the fm1-dock prototype;
  • one app, no module picker, no OPTIONS page, no BLE-MIDI, no packaged synths.

Identity FM-1_922. Build from the tag with the JieLi toolchain; the package is atlatl-0.1.fwsc.


Atl-Atl: The Atltuner 0.1 for the M-VAVE FM-1: the computer's audio over USB, tuned to the key held on the keyboard, out of the FM-1's speaker or headphones and back to the computer as a USB audio input.

Install with the command-line installer: python3 tools/fm1_install.py atlatl-0.1.fwsc.

atlatl-0.1.fwsc is the package (48 kHz); SHA256SUMS lists its SHA-256. The package holds three JieLi AC79 SDK files (Apache-2.0); LICENSE, LICENSING.md and LICENSES.zip carry every licence (GPL-3.0-only; Terminus font, OFL 1.1; JieLi SDK files, Apache-2.0). The complete source of this release is the tag v0.1.

Installing custom firmware is at your own risk. Atl-Atl is provided as is, without any warranty.

Full Changelog: https://github.com/jasonbot/atl-atl/commits/v0.1