Repository navigation
Releases
Gauntlet: Dark Legacy native port 1.3.2
Release 1.3.2 of the native port of Gauntlet: Dark Legacy (PlayStation 2, USA release SLUS-20047) for 64-bit Windows and Linux fixes the rare crash on NVIDIA cards while a level loads, and brings many effects and characters closer to the original.
No game files are included. As before, the installer reads them from your own copy of the game.
The NVIDIA crash while loading
On a GTX 1080 under Windows the game could stop with "The graphics card stopped working… the driver implementation is at fault", mostly on the first start after an update, during a long level load. A frame that took several seconds made the graphics library treat a late screen buffer as a lost device. The game now waits for the buffer instead. Tested with ten cold starts on that machine, including one with a 79-second load.
Closer to the original
- Sparks and blood are partly see-through, as in the original, and effects fade out at the end of their life.
- Enemy shadows. Every enemy has its round shadow under its feet again.
- Fading enemies. Warlocks fade in and out as they phase, Death fades as it leaves, and bosses fade away in their last half second.
- The shrink powerup makes enemies, golems, gargoyles and generals smaller on screen, with their shadows.
- Animated textures on the acid blobs (ACI) and on the Djinn, Drider and Yeti.
- Exploded red and poison barrels leave their broken staves fading out instead of bright red pieces.
- Gold and silver shields use the original's chrome shine.
- Sumner's ghost appears glowing and see-through, with his robe, when he congratulates a hero on a new level, and that caption uses the game's large font.
- Small sparks no longer hide inside walls, floor decals no longer flicker against the floor, and the X-ray powerup's window and several boss parts sit at the original's depth.
All computers in a network game need release 1.3.2; 1.3.1 cannot join a 1.3.2 game or the other way round.
Updating from 1.3.1 or earlier
Install the new package over your existing installation (pick the same folder). Saves and settings are kept.
What you need
- Your own copy of the game, the USA PlayStation 2 release (SLUS-20047): the disc in a drive, a disc image (.iso or .bin) or a folder copied from the disc. Other releases (PAL, Japanese, GameCube, Xbox) are refused rather than misread.
- 64-bit Windows (tested on Windows 11), or a 64-bit Linux distribution from 2020 or later: the GNU C library 2.31 or newer (for example Ubuntu 20.04, Debian 11, Fedora 32, RHEL 9 or newer). On Linux the game and the installer use X11 (Wayland desktops run them through XWayland) and the game uses ALSA for sound.
- A graphics card with Vulkan (Windows: Vulkan or DirectX 12).
- About 1 GB of disk space, or about 3 GB with HD textures.
Installing
- Download the package for your system and unpack it:
- Windows:
GauntletDarkLegacy-1.3.2-windows-x86_64.zip - Linux:
GauntletDarkLegacy-1.3.2-linux-x86_64.tar.gz
- Windows:
- Run
GauntletDarkLegacy-Installer(Windows:GauntletDarkLegacy-Installer.exe) and follow its pages: pick the disc, an image or a folder, then the install folder and the shortcuts. - Start the game from the shortcut, or run
gdl_play(Windows:gdl_play.exe) in the install folder.
The package's README.txt is the full guide; KNOWN_ISSUES.txt lists what is known to differ from the original, including how this release was tested.
Files
| File | What it is |
|---|---|
GauntletDarkLegacy-1.3.2-windows-x86_64.zip |
Windows package: installer and game |
GauntletDarkLegacy-1.3.2-linux-x86_64.tar.gz |
Linux package: installer and game |
GauntletDarkLegacy-1.3.2-source-6266068.tar.gz |
This release's source code (tag v1.3.2) |
qt6-base_6.10.2+dfsg.orig.tar.xz |
Source of the Qt libraries in the Linux installer |
qtbase-everywhere-src-6.11.1.tar.xz |
Source of the Qt libraries in the Windows installer |
gcc-13.1.0.tar.xz, mingw-builds-7ff96692a8032d893781523b311ac9b6cbbda0a1.tar.gz, mingw-builds-13.1.0-rev1-build-info.txt |
Source and build scripts of the GCC runtime libraries in the Windows installer |
SHA256SUMS |
SHA-256 of every file above (the library sources are listed under library-source/) |
License
This port is free software under the GNU General Public License, version 3 or later. Third-party components and their notices are listed in each package's THIRD_PARTY.md, THIRD_PARTY_LICENSES.txt and LIBRARY_LICENSES.txt; the source of the bundled libraries is attached above. The graphics library wgpu-hal is included in a slightly modified form (its source is in the source archive under third_party/). Gauntlet: Dark Legacy and its data belong to their owners; they are not part of this software.
Gauntlet: Dark Legacy native port 1.3.1
Release 1.3.1 of the native port of Gauntlet: Dark Legacy (PlayStation 2, USA release SLUS-20047) for 64-bit Windows and Linux plays the game's movies by itself: FFmpeg is no longer needed.
No game files are included. As before, the installer reads them from your own copy of the game.
Movies without FFmpeg
Up to 1.3.0 the game started a separate FFmpeg program to show its movies. On Windows that meant the movies were skipped unless you had put ffmpeg.exe into the install folder, and with it each movie opened a console window. 1.3.1 decodes the movies itself:
- Nothing to install. The intro, realm and ending movies play on Windows and Linux without FFmpeg.
- No console windows. The game starts no other program for the movies.
- The same pictures. Every frame of all 36 movies is identical to what FFmpeg decoded. The colours now follow the PCSX2 emulator's model of the PlayStation 2's colour conversion; they differ from before by less than 1 step in 255 on average.
An ffmpeg.exe left in your install folder is no longer used and can be deleted.
Tested with the Linux game and with the Windows game (under Wine) on a machine without FFmpeg. Not yet tested by a person on a Windows desktop: please report how it goes.
All computers in a network game need release 1.3.1; 1.3.0 cannot join a 1.3.1 game or the other way round. Network play is otherwise unchanged.
Updating from 1.3.0 or earlier
Install the new package over your existing installation (pick the same folder). Saves and settings are kept.
What you need
- Your own copy of the game, the USA PlayStation 2 release (SLUS-20047): the disc in a drive, a disc image (.iso or .bin) or a folder copied from the disc. Other releases (PAL, Japanese, GameCube, Xbox) are refused rather than misread.
- 64-bit Windows (tested on Windows 11), or a 64-bit Linux distribution from 2020 or later: the GNU C library 2.31 or newer (for example Ubuntu 20.04, Debian 11, Fedora 32, RHEL 9 or newer). On Linux the game and the installer use X11 (Wayland desktops run them through XWayland) and the game uses ALSA for sound.
- A graphics card with Vulkan (Windows: Vulkan or DirectX 12).
- About 1 GB of disk space, or about 3 GB with HD textures.
Installing
- Download the package for your system and unpack it:
- Windows:
GauntletDarkLegacy-1.3.1-windows-x86_64.zip - Linux:
GauntletDarkLegacy-1.3.1-linux-x86_64.tar.gz
- Windows:
- Run
GauntletDarkLegacy-Installer(Windows:GauntletDarkLegacy-Installer.exe) and follow its pages: pick the disc, an image or a folder, then the install folder and the shortcuts. - Start the game from the shortcut, or run
gdl_play(Windows:gdl_play.exe) in the install folder.
The package's README.txt is the full guide; KNOWN_ISSUES.txt lists what is known to differ from the original, including how this release was tested.
Files
| File | What it is |
|---|---|
GauntletDarkLegacy-1.3.1-windows-x86_64.zip |
Windows package: installer and game |
GauntletDarkLegacy-1.3.1-linux-x86_64.tar.gz |
Linux package: installer and game |
GauntletDarkLegacy-1.3.1-source-11e504f.tar.gz |
This release's source code (tag v1.3.1) |
qt6-base_6.10.2+dfsg.orig.tar.xz |
Source of the Qt libraries in the Linux installer |
qtbase-everywhere-src-6.11.1.tar.xz |
Source of the Qt libraries in the Windows installer |
gcc-13.1.0.tar.xz, mingw-builds-7ff96692a8032d893781523b311ac9b6cbbda0a1.tar.gz, mingw-builds-13.1.0-rev1-build-info.txt |
Source and build scripts of the GCC runtime libraries in the Windows installer |
SHA256SUMS |
SHA-256 of every file above (the library sources are listed under library-source/) |
License
This port is free software under the GNU General Public License, version 3 or later. Third-party components and their notices are listed in each package's THIRD_PARTY.md, THIRD_PARTY_LICENSES.txt and LIBRARY_LICENSES.txt; the source of the bundled libraries is attached above. Gauntlet: Dark Legacy and its data belong to their owners; they are not part of this software.
Gauntlet: Dark Legacy native port 1.3.0
Release 1.3.0 of the native port of Gauntlet: Dark Legacy (PlayStation 2, USA release SLUS-20047) for 64-bit Windows and Linux makes network play hold up over the internet.
No game files are included. As before, the installer reads them from your own copy of the game.
Network play over the internet
In 1.2.0 every computer waited for the slowest connection on every step, so a distant player made the game stutter or run slow. In 1.3.0:
- Your own buttons never wait. Each computer reads its controllers on its own steady clock and sends them at once. The game only pauses ("Waiting for the other machines…") if a connection stops for more than a second.
- Your own actions show immediately. Each computer draws the game slightly ahead, assuming the other players keep doing what they did last, and corrects itself when their buttons arrive. Over a long route another player can jump back a little when they change direction. The game itself is identical on every computer; the drawing ahead never changes it.
- The computers keep in step. The host tells a computer that runs ahead to slow down slightly, and a computer that fell behind catches up, also when its picture runs below 30 frames a second.
Tested with two copies of the game on one computer with internet-like delays simulated (round trips of about 230 and 315 ms with jitter): the game kept about 29 of its 30 steps a second during play, and the two games stayed identical, also with the Windows version joining a Linux host. Not yet tested between two real computers over the internet: please report how it goes.
All computers need release 1.3.0; 1.2.0 cannot join a 1.3.0 game or the other way round.
Updating from 1.2.0
Install the new package over your existing installation (pick the same folder). Saves and settings are kept.
What you need
- Your own copy of the game, the USA PlayStation 2 release (SLUS-20047): the disc in a drive, a disc image (.iso or .bin) or a folder copied from the disc. Other releases (PAL, Japanese, GameCube, Xbox) are refused rather than misread.
- 64-bit Windows (tested on Windows 11), or a 64-bit Linux distribution from 2020 or later: the GNU C library 2.31 or newer (for example Ubuntu 20.04, Debian 11, Fedora 32, RHEL 9 or newer). On Linux the game and the installer use X11 (Wayland desktops run them through XWayland) and the game uses ALSA for sound.
- A graphics card with Vulkan (Windows: Vulkan or DirectX 12).
- About 1 GB of disk space, or about 3 GB with HD textures.
- Optional: FFmpeg for the game's movies (Linux: from your distribution; Windows: put ffmpeg.exe into the install folder). Without it each movie is skipped.
Installing
- Download the package for your system and unpack it:
- Windows:
GauntletDarkLegacy-1.3.0-windows-x86_64.zip - Linux:
GauntletDarkLegacy-1.3.0-linux-x86_64.tar.gz
- Windows:
- Run
GauntletDarkLegacy-Installer(Windows:GauntletDarkLegacy-Installer.exe) and follow its pages: pick the disc, an image or a folder, then the install folder and the shortcuts. - Start the game from the shortcut, or run
gdl_play(Windows:gdl_play.exe) in the install folder.
The package's README.txt is the full guide; KNOWN_ISSUES.txt lists what is known to differ from the original, including how this release was tested.
Files
| File | What it is |
|---|---|
GauntletDarkLegacy-1.3.0-windows-x86_64.zip |
Windows package: installer and game |
GauntletDarkLegacy-1.3.0-linux-x86_64.tar.gz |
Linux package: installer and game |
GauntletDarkLegacy-1.3.0-source-6189cca.tar.gz |
This release's source code (tag v1.3.0) |
qt6-base_6.10.2+dfsg.orig.tar.xz |
Source of the Qt libraries in the Linux installer |
qtbase-everywhere-src-6.11.1.tar.xz |
Source of the Qt libraries in the Windows installer |
gcc-13.1.0.tar.xz, mingw-builds-7ff96692a8032d893781523b311ac9b6cbbda0a1.tar.gz, mingw-builds-13.1.0-rev1-build-info.txt |
Source and build scripts of the GCC runtime libraries in the Windows installer |
SHA256SUMS |
SHA-256 of every file above (the library sources are listed under library-source/) |
License
This port is free software under the GNU General Public License, version 3 or later. Third-party components and their notices are listed in each package's THIRD_PARTY.md, THIRD_PARTY_LICENSES.txt and LIBRARY_LICENSES.txt; the source of the bundled libraries is attached above. Gauntlet: Dark Legacy and its data belong to their owners; they are not part of this software.
Gauntlet: Dark Legacy native port 1.2.0
Release 1.2.0 of the native port of Gauntlet: Dark Legacy (PlayStation 2, USA release SLUS-20047) for 64-bit Windows and Linux adds network play and fixes the size of the items in opened chests.
No game files are included. As before, the installer reads them from your own copy of the game.
New: network play
Up to four computers can now play one game together over a network. This is not in the original game; it was added to this port.
- Host: on the title screen choose Network → Host Game, keep port 28780 or type another, and let it through your firewall (Windows asks the first time). Give the other players your computer's address and the port, and press Enter or Start when everyone is in.
- Join: choose Network → Join Game, type the host's name or IP address (add
:portif the host chose another) and press Enter. - Everyone then sees the character select screen, just as on the couch: the host's player 1 is in, and everyone else presses Start on their own controller to join. Four players in all: two on each of two computers, or one per computer with four.
Everyone shares one game. The characters come from the host's saves and are saved on the host's computer; the host's game options apply; anyone can pause and use the menu for everyone. Audio, screen position and the graphics options stay each computer's own: set audio before the game, and use F10 for the graphics options during it (the game goes on meanwhile). Every computer runs the whole game and only the buttons travel, so the game waits for the slowest connection: a local network or a fast connection works best. All computers need release 1.2.0, installed from the same disc. See the Network play section of README.txt. Network play was tested with two copies of the game on one computer (Linux, and the Windows version under Wine joining a Linux host), not yet between two computers or over the internet: please report how it goes.
Fixed since 1.1.0
- The item inside an opened chest was shown at a fifth of its size, so food could not be told from poisoned food. It now grows as the lid opens and sits in the open chest at full size, as in the original.
Updating from 1.1.0
Install the new package over your existing installation (pick the same folder). Saves and settings are kept.
What you need
- Your own copy of the game, the USA PlayStation 2 release (SLUS-20047): the disc in a drive, a disc image (.iso or .bin) or a folder copied from the disc. Other releases (PAL, Japanese, GameCube, Xbox) are refused rather than misread.
- 64-bit Windows (tested on Windows 11), or a 64-bit Linux distribution from 2020 or later: the GNU C library 2.31 or newer (for example Ubuntu 20.04, Debian 11, Fedora 32, RHEL 9 or newer). On Linux the game and the installer use X11 (Wayland desktops run them through XWayland) and the game uses ALSA for sound.
- A graphics card with Vulkan (Windows: Vulkan or DirectX 12).
- About 1 GB of disk space, or about 3 GB with HD textures.
- Optional: FFmpeg for the game's movies (Linux: from your distribution; Windows: put ffmpeg.exe into the install folder). Without it each movie is skipped.
Installing
- Download the package for your system and unpack it:
- Windows:
GauntletDarkLegacy-1.2.0-windows-x86_64.zip - Linux:
GauntletDarkLegacy-1.2.0-linux-x86_64.tar.gz
- Windows:
- Run
GauntletDarkLegacy-Installer(Windows:GauntletDarkLegacy-Installer.exe) and follow its pages: pick the disc, an image or a folder, then the install folder and the shortcuts. - Start the game from the shortcut, or run
gdl_play(Windows:gdl_play.exe) in the install folder.
The package's README.txt is the full guide; KNOWN_ISSUES.txt lists what is known to differ from the original, including how this release was tested.
Files
| File | What it is |
|---|---|
GauntletDarkLegacy-1.2.0-windows-x86_64.zip |
Windows package: installer and game |
GauntletDarkLegacy-1.2.0-linux-x86_64.tar.gz |
Linux package: installer and game |
GauntletDarkLegacy-1.2.0-source-07c61b2.tar.gz |
This release's source code (tag v1.2.0) |
qt6-base_6.10.2+dfsg.orig.tar.xz |
Source of the Qt libraries in the Linux installer |
qtbase-everywhere-src-6.11.1.tar.xz |
Source of the Qt libraries in the Windows installer |
gcc-13.1.0.tar.xz, mingw-builds-7ff96692a8032d893781523b311ac9b6cbbda0a1.tar.gz, mingw-builds-13.1.0-rev1-build-info.txt |
Source and build scripts of the GCC runtime libraries in the Windows installer |
SHA256SUMS |
SHA-256 of every file above (the library sources are listed under library-source/) |
License
This port is free software under the GNU General Public License, version 3 or later. Third-party components and their notices are listed in each package's THIRD_PARTY.md, THIRD_PARTY_LICENSES.txt and LIBRARY_LICENSES.txt; the source of the bundled libraries is attached above. Gauntlet: Dark Legacy and its data belong to their owners; they are not part of this software.
Gauntlet: Dark Legacy native port 1.1.0
Release 1.1.0 of the native port of Gauntlet: Dark Legacy (PlayStation 2, USA release SLUS-20047) for 64-bit Windows and Linux adds modern graphics options and fixes the problems found in play since 1.0.0.
No game files are included. As before, the installer reads them from your own copy of the game.
New: graphics options
F10 → Graphics... (or Options → Display on the title screen) has a set of picture options that are not in the original game. They change only how it looks, never how it plays. All of them except HD textures are on by default; the Preset row switches between Enhanced and Original (everything off).
- Texture filtering: textures stay sharp at your screen's resolution and in the distance.
- Sharpening: adjustable, 40 % by default.
- Colour precision: smooth gradients instead of the PS2's 16-bit dither pattern.
- Smooth lightmaps: soft edges on the levels' painted-in shadows.
- Dynamic lights: up to 32 lights from spells and explosions instead of 8.
- Torch light: gentle flickering light from torches and fires.
- Character shadows: real shadows for players, enemies and items instead of round blobs.
- Ambient occlusion: soft shading in corners and creases. Anti-aliasing then switches from MSAA to SMAA.
- Bloom: a glow around bright fire and magic.
- HD textures (off by default): four-times sharper textures, made once on your computer from your own disc. They take about 2 GB and about six and a half minutes on a Radeon RX 580, with progress shown on the row. Fire, glows, magic effects and skies keep their original textures. The upscaling uses the Real-ESRGAN network (BSD-3-Clause); no upscaled game art is distributed.
If the frame rate drops on your computer, turn off Character shadows and Ambient occlusion first. "Original presentation" on the main settings page still returns the whole picture to the original game's.
Fixed since 1.0.0
- The game could crash when you met an enemy type you had not seen yet in a level (for example in the Town, Forsaken Province 2).
- Secret treasure rooms ended on the first coin and unlocked their character at once. They are timed again, and you need to collect all 25 coins in time.
- Exploding red barrels showed no fireball and left no scorch mark.
- Chests blown up by an explosion just vanished; they now burst into smoke and leave charred remains.
- Secret walls (the cracked crates and hedge blocks) showed no sparks when hit and no burst when destroyed.
- Enemies could stay flashing white after being hit.
- Death was invisible.
- The barrel carriers' poison gas cloud disappeared too early.
- An opened chest showed a white square.
- Backing out of the character select screen with no player left now returns to the title screen.
- A developer message ("… COMPLETE - entering …") no longer appears when you enter a treasure room.
Updating from 1.0.0
Install the new package over your existing installation (pick the same folder). Saves and settings are kept. Settings saved by 1.0.0 have no graphics options yet, so you start with the Enhanced preset. Choose "Original" on the Graphics page for the 1.0.0 look.
What you need
- Your own copy of the game, the USA PlayStation 2 release (SLUS-20047): the disc in a drive, a disc image (.iso or .bin) or a folder copied from the disc. Other releases (PAL, Japanese, GameCube, Xbox) are refused rather than misread.
- 64-bit Windows (tested on Windows 11), or a 64-bit Linux distribution from 2020 or later: the GNU C library 2.31 or newer (for example Ubuntu 20.04, Debian 11, Fedora 32, RHEL 9 or newer). On Linux the game and the installer use X11 (Wayland desktops run them through XWayland) and the game uses ALSA for sound.
- A graphics card with Vulkan (Windows: Vulkan or DirectX 12).
- About 1 GB of disk space, or about 3 GB with HD textures.
- Optional: FFmpeg for the game's movies (Linux: from your distribution; Windows: put ffmpeg.exe into the install folder). Without it each movie is skipped.
Installing
- Download the package for your system and unpack it:
- Windows:
GauntletDarkLegacy-1.1.0-windows-x86_64.zip - Linux:
GauntletDarkLegacy-1.1.0-linux-x86_64.tar.gz
- Windows:
- Run
GauntletDarkLegacy-Installer(Windows:GauntletDarkLegacy-Installer.exe) and follow its pages: pick the disc, an image or a folder, then the install folder and the shortcuts. - Start the game from the shortcut, or run
gdl_play(Windows:gdl_play.exe) in the install folder.
The package's README.txt is the full guide; KNOWN_ISSUES.txt lists what is known to differ from the original, including how this release was tested.
Files
| File | What it is |
|---|---|
GauntletDarkLegacy-1.1.0-windows-x86_64.zip |
Windows package: installer and game |
GauntletDarkLegacy-1.1.0-linux-x86_64.tar.gz |
Linux package: installer and game |
GauntletDarkLegacy-1.1.0-source-1aa0fe8.tar.gz |
This release's source code (tag v1.1.0) |
qt6-base_6.10.2+dfsg.orig.tar.xz |
Source of the Qt libraries in the Linux installer |
qtbase-everywhere-src-6.11.1.tar.xz |
Source of the Qt libraries in the Windows installer |
gcc-13.1.0.tar.xz, mingw-builds-7ff96692a8032d893781523b311ac9b6cbbda0a1.tar.gz, mingw-builds-13.1.0-rev1-build-info.txt |
Source and build scripts of the GCC runtime libraries in the Windows installer |
SHA256SUMS |
SHA-256 of every file above (the library sources are listed under library-source/) |
License
This port is free software under the GNU General Public License, version 3 or later. Third-party components and their notices are listed in each package's THIRD_PARTY.md, THIRD_PARTY_LICENSES.txt and LIBRARY_LICENSES.txt; the source of the bundled libraries is attached above. Gauntlet: Dark Legacy and its data belong to their owners; they are not part of this software.
Gauntlet: Dark Legacy native port 1.0.0
The complete native port of Gauntlet: Dark Legacy (PlayStation 2, USA release SLUS-20047) for 64-bit Windows and Linux. It runs the original game's rules natively — no emulator, no PlayStation 2 BIOS: the Tower, every realm and boss, one to four players, the original HUD, menus, audio and movies, and saves.
No game files are included. The installer reads them from your own copy of the game and checks every file against the supported release.
What you need
- Your own copy of the game, the USA PlayStation 2 release (SLUS-20047): the disc in a drive, a disc image (.iso or .bin) or a folder copied from the disc. Other releases (PAL, Japanese, GameCube, Xbox) are refused rather than misread.
- 64-bit Windows (tested on Windows 11), or a 64-bit Linux distribution from 2020 or later: the GNU C library 2.31 or newer (for example Ubuntu 20.04, Debian 11, Fedora 32, RHEL 9 or newer). On Linux the game and the installer use X11 (Wayland desktops run them through XWayland) and the game uses ALSA for sound.
- A graphics card with Vulkan (Windows: Vulkan or DirectX 12).
- About 1 GB of disk space.
- Optional: FFmpeg for the game's movies (Linux: from your distribution; Windows: put ffmpeg.exe into the install folder). Without it each movie is skipped.
Installing
- Download the package for your system and unpack it:
- Windows:
GauntletDarkLegacy-1.0.0-windows-x86_64.zip - Linux:
GauntletDarkLegacy-1.0.0-linux-x86_64.tar.gz
- Windows:
- Run
GauntletDarkLegacy-Installer(Windows:GauntletDarkLegacy-Installer.exe) and follow its pages: pick the disc, an image or a folder, then the install folder and the shortcuts. Importing takes a minute or two from an image, longer from a disc. - Start the game from the shortcut, or run
gdl_play(Windows:gdl_play.exe) in the install folder.
The installer carries its own Qt libraries, so nothing has to be installed first. Saves and settings live outside the install folder and are kept when you install again or update.
The package's README.txt is the full guide (controls, settings, saves, movies, uninstalling); KNOWN_ISSUES.txt lists what is known to differ from the original.
Optional extras
F10 opens the settings: widescreen view, motion smoothing at your display's rate, VSync, frame cap, fullscreen, anti-aliasing, reduced flashes, a frame-rate counter, keyboard key bindings and button prompts. With an Xbox-style controller the on-screen buttons show A, B, X and Y instead of the PlayStation's symbols. "Original presentation" returns the picture to the original game's (your window, keys and button prompts are kept).
Files
| File | What it is |
|---|---|
GauntletDarkLegacy-1.0.0-windows-x86_64.zip |
Windows package: installer and game |
GauntletDarkLegacy-1.0.0-linux-x86_64.tar.gz |
Linux package: installer and game |
GauntletDarkLegacy-1.0.0-source-853d127.tar.gz |
This release's source code (tag v1.0.0) |
qt6-base_6.10.2+dfsg.orig.tar.xz |
Source of the Qt libraries in the Linux installer |
qtbase-everywhere-src-6.11.1.tar.xz |
Source of the Qt libraries in the Windows installer |
gcc-13.1.0.tar.xz, mingw-builds-7ff96692a8032d893781523b311ac9b6cbbda0a1.tar.gz, mingw-builds-13.1.0-rev1-build-info.txt |
Source and build scripts of the GCC runtime libraries in the Windows installer |
SHA256SUMS |
SHA-256 of every file above (the library sources are listed under library-source/) |
License
This port is free software under the GNU General Public License, version 3 or later. Third-party components and their notices are listed in each package's THIRD_PARTY.md, THIRD_PARTY_LICENSES.txt and LIBRARY_LICENSES.txt; the source of the bundled libraries is attached above. Gauntlet: Dark Legacy and its data belong to their owners; they are not part of this software.