Repository navigation
1. VGA Input Board & Mod
The arcade Q3D card were shipped without the VGA input port. This can be fixed with modding and my add-on board.
Find J2 on the board and populate with a 2x7 2.54mm pitched male straight pin header.
The PCB itself is very typical. Link to gerber file
Only three parts are required.
- VGA Port Slim, Male - Link
-
2x7pin header,2.54mmpitched,female,straight - 3D printed spacer - Link
This is to make sure the pin header aren't pushed down too much and become crooked.

I created a 3D printed bracket for this card, as now there is an extra port, the original bracket wouldn't work anymore (mine didn't come with any to begin with).
The print is designed flat. I used a jig of two metal rulers and hot air to bend it as precise as possible.
The indented line on the piece is where the bend should happen.
I used the smallest nozzle on my hot air station. At 220ºC, it started bending really quick. Don't be startled!

Note: The socket to screw the nuts is 3/16" in size.
The pin definition of J2 is as shown. It features full RGBHV signals, DDC2 SDA/SCL signals, and 5V to power the DDC2 circuit. This makes sure the computer will be able to detect and recognize the connected monitor properly, unlike some other Voodoo 2 cards that erroneously grounded VGA pin 11 and broke DDC2 completely.
Note there is a retail version of the Q3D card that was populated with a 8-pin mini DIN connector for VGA input. You won't be able to use my VGA input board with that port present.